Physics only: spec points 4.2.5.1 and 4.2.5.2
Static electricity is GCSE Physics only (not Combined Science), on both tiers, with no equations. Be ready to:
- use electrons to explain how rubbing charges two insulators, and how sparks can follow
- describe what shows that charged objects attract or repel across a gap
- say what an electric field is, draw one round a lone charged sphere, and use it to explain the force between charges and sparking
Rubbing moves electrons
Uncharged objects hold equal numbers of protons and electrons, whose charges cancel. Rubbing two different insulators together tears some electrons from one surface onto the other. Protons cannot follow: they are fixed in the nuclei.
- The material with extra electrons is now negative.
- The material that lost them is positive, by exactly the same amount.
No charge is created; it only moves. Polythene rubbed with a dry cloth gains electrons, so the rod turns negative and the cloth positive. Acetate loses electrons to the cloth and turns positive. Insulators hold the charge where it was rubbed.
Forces across a gap
Charged objects can attract or repel across empty space: a non-contact force. Two positives or two negatives repel; a positive and a negative attract.
Evidence. Hang a rubbed polythene rod in a paper stirrup on a thread, so it can swivel. Bring a second rubbed polythene rod near one end, not touching: the hanging rod turns away. A rubbed acetate rod makes that end swing towards it instead.
What an electric field is
Every charged object has an electric field round it: put another charge anywhere in this region and it is pushed or pulled. Near the object the field is intense and further out it weakens, so charged objects tug harder on each other when closer. That is how the force acts without contact: each object sits in the other's field.
Drawing the field of a charged sphere
A good drawing shows:
- straight lines meeting the surface at right angles, evenly spread all round
- arrows away from a positive sphere, or in towards a negative one, since each arrow shows the force on a small positive charge
- lines spreading apart with distance, as the field weakens
- no crossing lines: the field points one way at each place
Worked example: a spark from a car door
Question. After sliding across a car seat, a passenger reaches for the metal door and feels a tiny spark. Explain why.
- Charging. Rubbing transfers electrons between two insulators, clothing and seat cover, leaving the passenger charged (the sign depends on the materials).
- The field. The charge sets up an electric field round the passenger. As the finger nears the door, the field in the narrowing gap becomes very strong.
- Breakdown. A strong enough field ionises the air, so the air conducts.
- The spark. Electrons jump the gap: off the finger if the passenger is negative, onto it if positive. That sudden flow of charge is the shock.
In the simulation above
Charging starts on the Polythene rod, held above Bits of paper.
- Press Rub once: a blue − (5 nC of electrons) hops onto the rod. Its card reads −5 nC, Cloth reads +5 nC and Total charge stays at 0 nC. Rub the Acetate rod (under Object): electrons leave it instead.
- Back on the Polythene rod, choose A hanging charged rod under Bring it near. Press Rub ten times, then Near: the hanging rod swings away. Set Hanging rod to Acetate (+) and it swings in until it touches.
- Switch Part to Fields. One positive charge is a lone charged ball, with field lines and the yellow test charge already on. Pushed right up against the ball, Field at the test charge reads Strong; in a far corner, Weak. One negative charge turns every arrow inwards.
- In Spark gap, drag one ball slowly closer to the other: a spark jumps when the gap is just under 1 cm, leaving both balls uncharged.
Induced charge (why uncharged paper is pulled up), the electroscope, earthing, the field values and the field patterns in Positive and negative, Two positive charges, Parallel plates and Sharp point go beyond AQA.