Skip to content

GCSE Physics — AQA · Particle model of matter

Density

4.3.1.1

Density is mass per unit volume: ρ = m/V, in kg/m³ (recall it). Particles explain why gases are far less dense than solids and liquids. Required practical 5 measures regular solids, irregular solids (by displacement) and liquids. Both tiers, GCSE Physics and Combined Science.

Loading simulation…

Symbols match your course. Open the full measuring density simulation for more presets and teacher tools.

What AQA asks for: spec point 4.3.1.1

Density is on both tiers, in GCSE Physics and in Combined Science. Its equation is not on the equation sheet, so you must remember it. You should be able to:

  • recall and use ρ=mV\rho = \dfrac{m}{V}, including changes of state, where mass is conserved
  • use the particle model to explain why solids, liquids and gases have different densities, and draw simple particle diagrams
  • describe Required practical 5: the density of regular solids, irregular solids and liquids. Combined Science students do the same practical under a different number.

The equation

ρ=mV\rho = \frac{m}{V}

Density ρ\rho (rho) is in kilograms per metre cubed (kg/m³), mass mm in kg and volume VV in m³. Lab readings in g and cm³ give g/cm³; multiply by 1000 to convert, since 1 g/cm³ = 1000 kg/m³. So aluminium at 2.7 g/cm³ is 2700 kg/m³.

Worked example 1: a pebble. A dry pebble has a mass of 39 g. Lowered into a measuring cylinder, it raises the water level from 42 cm³ to 57 cm³.

Given: m=39m = 39 g =0.039= 0.039 kg, V=57−42=15V = 57 - 42 = 15 cm³ =1.5×10−5= 1.5 \times 10^{-5} m³. Equation: ρ=mV\rho = \dfrac{m}{V}. Substitution: ρ=0.0391.5×10−5\rho = \dfrac{0.039}{1.5 \times 10^{-5}}. Answer: ρ=2600\rho = 2600 kg/m³, which is 2.6 g/cm³.

Worked example 2: air in a classroom. A classroom measures 8.0 m × 6.0 m × 3.0 m, and air has a density of about 1.2 kg/m³. Estimate the mass of air inside.

Given: V=8.0×6.0×3.0=144V = 8.0 \times 6.0 \times 3.0 = 144 m³, ρ=1.2\rho = 1.2 kg/m³. Equation: rearrange to m=ρVm = \rho V. Substitution: m=1.2×144=172.8m = 1.2 \times 144 = 172.8. Answer: about 170 kg (2 s.f.).

Particles and density

  • Solid: particles packed tightly in a regular pattern, vibrating about fixed positions.
  • Liquid: particles still touching, but randomly arranged and able to slide past one another.
  • Gas: particles far apart, moving quickly in random directions.

Close-packed particles put a lot of mass into each cubic metre, so solids and liquids are dense. A gas spreads its particles through a far larger volume: liquid water is close to 1000 kg/m³, but steam at 100 °C is under 1 kg/m³.

Mass is conserved in a change of state, so a change in volume changes the density. Most substances are slightly denser as solids, but water expands as it freezes, so ice (about 920 kg/m³) floats.

Required practical 5

Regular solid. Measure its sides with a ruler (Vernier callipers or a micrometer for small objects), calculate the volume and find the mass on a top-pan balance.

Irregular solid. Find the mass while the object is dry, then find its volume by displacement:

  • Part-fill a measuring cylinder and read the volume. Lower the object in on a thread until it is fully under, then read again. The difference is the object's volume.
  • If it is too wide for the cylinder, fill a eureka can until water runs from the spout. Once it stops dripping, put an empty measuring cylinder under the spout and lower the object in; the water collected has the object's volume.

Liquid. Stand an empty measuring cylinder on the balance and zero it, or record its mass. Pour in some liquid, then read its volume and its mass.

Read volumes at the bottom of the meniscus, with your eye level with it, and repeat each measurement.

Using the simulation

In the simulation above, the Regular experiment starts with a 2.0 cm Aluminium cube. The Volume card reads 8.00 cm³, but Mass says Press Weigh. Press Weigh it: the balance shows 21.6 g and Density gives 2.70 g/cm³ = 2700 kg/m³. Pick Copper from Material while the cube is on the balance: 71.2 g and 8.90 g/cm³.

Switch to Irregular. The pebble sits on the balance (20.8 g) beside 50 cm³ of water in a measuring cylinder. Press Lower in and the reading climbs to 58 cm³, so the volume is 8 cm³ and the density 2.60 g/cm³. Now choose Large stone from Object: it will not fit, so select Eureka can.

Under Liquid, press Pour to add 50 cm³ of cooking oil. The mass by difference is 150.3 g − 104.3 g = 46.0 g, giving 0.920 g/cm³. Switching on Zero the balance with the empty cylinder on it does that subtraction for you.

Equations

Common mistakes

  • Dividing the volume by the mass. Density is mass ÷ volume; an everyday metal such as iron or copper coming out well below 1 g/cm³ is a sign the division is upside down.
  • Mixing units, such as grams with m³. Use kg with m³ to get kg/m³, or g with cm³ to get g/cm³, then multiply g/cm³ by 1000 to give kg/m³.
  • Converting cm³ to m³ by dividing by 100. One cubic metre holds 1 000 000 cm³, so divide by a million.
  • Using the final measuring-cylinder reading as the object's volume. The object's volume is the rise in the reading: final reading − starting reading.
  • Saying a gas is less dense because its particles are lighter. The particles are the same as in the liquid; they are just much further apart.
  • Thinking a bigger piece of the same material has a bigger density. Double the volume and the mass doubles too, so the density does not change.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.A metal block is a cuboid measuring 4.0 cm × 3.0 cm × 2.0 cm. Its mass is 213.6 g.

    1. (a)Write down the equation that links density, mass and volume.

      1 mark
      Show the answer

      Answer: density = mass ÷ volume (ρ = m ÷ V)

      Marking points

      • density = mass ÷ volume
    2. (b)Calculate the volume of the block in cm³.

      1 mark
      Show the answer

      Answer: V = 4.0 × 3.0 × 2.0 = 24 cm³

      Marking points

      • 24 cm³
    3. (c)Calculate the density of the metal in kg/m³.

      3 marks
      Show the answer

      Answer: ρ = 213.6 ÷ 24 = 8.9 g/cm³ = 8900 kg/m³ (or 0.2136 kg ÷ 2.4 × 10⁻⁵ m³ = 8900 kg/m³)

      Marking points

      • ρ = 213.6 ÷ 24 (allow their volume)
      • 8.9 g/cm³, or converting to 0.2136 kg and 2.4 × 10⁻⁵ m³
      • 8900 kg/m³
    4. (d)The densities of four metals are: aluminium 2700 kg/m³, iron 7900 kg/m³, copper 8900 kg/m³, lead 11 300 kg/m³. Which metal is the block most likely to be made of?

      1 mark
      Show the answer

      Answer: Copper

      Marking points

      • Copper (allow the metal matching their calculated density)
  2. 2.A student wants to find the density of a small stone with an irregular shape. The student has a top-pan balance, a measuring cylinder, a eureka can, some water and a length of thread.

    1. (a)Describe how the student could use this apparatus to determine the density of the stone.

      6 marks
      Show the answer

      Answer: Measure the mass of the dry stone on the top-pan balance. Part-fill the measuring cylinder with water and read the volume at the bottom of the meniscus, with the eye level with it. Tie the thread to the stone and lower it gently until it is completely under the water. Read the new volume. The volume of the stone is the new reading minus the first reading. (If the stone does not fit, fill the eureka can to its spout and collect the water that overflows in the measuring cylinder.) Calculate density = mass ÷ volume. Repeat and find a mean. (AQA marks 6-mark questions as a whole, by level of response. The marking points below show what a top-level answer covers.)

      Marking points

      • Mass of the stone measured on the top-pan balance.
      • Measuring cylinder part-filled with water and the starting volume read (at the bottom of the meniscus, eye level).
      • Stone lowered on the thread until fully submerged, and the new volume read.
      • Volume of the stone = final reading − starting reading (or the volume of water collected from a full eureka can).
      • Density calculated using density = mass ÷ volume.
      • Measurements repeated and a mean calculated (or units consistent, such as g and cm³ giving g/cm³).
    2. (b)Explain why the student should lower the stone into the measuring cylinder on the thread rather than dropping it in.

      2 marks
      Show the answer

      Answer: Dropping the stone could crack or break the measuring cylinder. It could also splash water out, so the second reading, and so the volume, would be too small.

      Marking points

      • The stone could crack or break the glass (a safety risk).
      • Water could splash out, making the measured volume too small.
    3. (c)Some air bubbles stay stuck to the stone under the water. Explain the effect this has on the student's value for density.

      2 marks
      Show the answer

      Answer: The bubbles also push water aside, so the measured volume is larger than the stone's real volume. Dividing the mass by too large a volume gives a density that is too small.

      Marking points

      • The measured volume is too large (the bubbles displace water as well).
      • So the calculated density is too small.
  3. 3.A block of ice with a mass of 0.46 kg melts completely. Density of ice = 920 kg/m³. Density of water = 1000 kg/m³.

    1. (a)State the mass of the water formed. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: 0.46 kg, because mass is conserved when a substance changes state.

      Marking points

      • 0.46 kg
      • Mass is conserved in a change of state.
    2. (b)Calculate the volume of the ice.

      2 marks
      Show the answer

      Answer: V = m ÷ ρ = 0.46 ÷ 920 = 5.0 × 10⁻⁴ m³

      Marking points

      • V = 0.46 ÷ 920
      • 5.0 × 10⁻⁴ m³ (0.00050 m³)
    3. (c)Calculate the decrease in volume as the ice melts.

      2 marks
      Show the answer

      Answer: Volume of water = 0.46 ÷ 1000 = 4.6 × 10⁻⁴ m³. Decrease = 5.0 × 10⁻⁴ − 4.6 × 10⁻⁴ = 4.0 × 10⁻⁵ m³.

      Marking points

      • Volume of water = 4.6 × 10⁻⁴ m³
      • Decrease = 4.0 × 10⁻⁵ m³ (allow their ice volume minus 4.6 × 10⁻⁴ m³)
    4. (d)Steam has a much lower density than liquid water. Explain why, in terms of particles.

      2 marks
      Show the answer

      Answer: The particles in steam are much further apart than in liquid water. So the same mass takes up a much larger volume, giving a lower density.

      Marking points

      • Particles in a gas are much further apart (than in a liquid).
      • So the same mass occupies a much larger volume.
  4. 4.A student measures the density of a cooking oil. An empty measuring cylinder has a mass of 86.4 g. With 60 cm³ of oil inside, the cylinder and oil have a mass of 141.6 g.

    1. (a)Calculate the mass of the oil.

      1 mark
      Show the answer

      Answer: 141.6 − 86.4 = 55.2 g

      Marking points

      • 55.2 g
    2. (b)Calculate the density of the oil in g/cm³.

      2 marks
      Show the answer

      Answer: ρ = 55.2 ÷ 60 = 0.92 g/cm³

      Marking points

      • ρ = 55.2 ÷ 60 (allow their mass)
      • 0.92 g/cm³
    3. (c)Explain why the student should read the volume with their eye level with the bottom of the meniscus.

      2 marks
      Show the answer

      Answer: Looking from above or below makes the meniscus appear at the wrong mark (parallax), so the volume reading would be wrong. The scale is designed to be read at the bottom of the curved surface.

      Marking points

      • To avoid parallax error (reading from above or below shifts the apparent level).
      • So the volume is read correctly, at the bottom of the curved surface.

Quick check

6 questions

  1. 1.An object has a mass of 2.0 kg and a volume of 0.0025 m³. What is its density?
  2. 2.Sea water has a density of 1.03 g/cm³. What is this in kg/m³?
  3. 3.Why is a substance much less dense as a gas than as a liquid?
  4. 4.Which apparatus would you use to find the volume of a key?
  5. 5.The water in a measuring cylinder reads 30 cm³. A 21 g object is lowered in until covered, and the reading becomes 37 cm³. What is the object's density?
  6. 6.A 1.0 kg block of ice melts completely. Which statement is correct?