What density tells you
Fill one glass with sand and an identical glass with sawdust. The volumes are the same, but the sand is far heavier. Different substances pack different amounts of mass into the same space, because their molecules have different masses and are spaced differently. Density lets us compare them fairly: it is the mass per unit volume of a substance.
Here (the Greek letter rho) is the density, the mass and the volume. Learn the rearranged forms too: and .
Units of density
The SI unit is the kilogram per cubic metre, kg m⁻³. In the laboratory, masses are usually in grams and volumes in cubic centimetres, so g cm⁻³ is also common. Since 1 g = 10⁻³ kg and 1 cm³ = 10⁻⁶ m³,
So multiply a density in g cm⁻³ by 1000 to get kg m⁻³. Pure water has a density of 1 g cm⁻³ (1000 kg m⁻³) and aluminium 2.7 g cm⁻³ (2700 kg m⁻³).
Density belongs to the material
Cut a block of aluminium in half. Each half has half the mass and half the volume, so stays the same. A small aluminium spoon and a large aluminium degchi have the same density. This is why density helps to identify a material and to test its purity: a gold bangle mixed with a cheaper metal usually has a lower density than pure gold.
Measuring density
Every density experiment needs two measurements, a mass and a volume.
- Mass: weigh the object on a physical balance or an electronic balance.
- Volume of a regular solid: measure its sides with a metre rule or Vernier Callipers and calculate. For a cuboid, volume = length × breadth × thickness.
- Volume of an irregular solid: lower it into a measuring cylinder of water; the rise in the reading is its volume.
- Mass of a liquid: weigh an empty beaker, pour in a measured volume of the liquid and weigh again. The difference is the mass of the liquid.
Worked numerical 1: a glass block
A glass block is 5.0 cm long, 4.0 cm broad and 2.0 cm thick, and its mass is 100 g. Find its density in g cm⁻³ and in kg m⁻³.
Worked numerical 2: cooking oil
An empty beaker has a mass of 85.0 g. After 200 cm³ of cooking oil is poured in, the beaker and oil together have a mass of 269.0 g. Find the density of the oil.
The oil is less dense than water. Oil and water do not mix, so when they are poured together they form two layers, and the less dense oil stays on top.
Worked numerical 3: a rooftop tank
A full rooftop tank holds 1.5 m³ of water of density 1000 kg m⁻³. Find the mass and the weight of the water. Take .
Engineers make calculations like this to check that a roof or a foundation can carry its load safely.
Using the simulation
In the simulation above, the Regular experiment shows an Aluminium cube of side 2.0 cm standing against two rulers. The Volume card already gives 8.00 cm³. Press Weigh it: the Mass card reads 21.6 g and the Density card shows 2.70 g cm⁻³ = 2700 kg m⁻³.
- With the cube still on the balance, drag Side to 4.0 cm. The volume becomes 64.0 cm³ and the mass 172.8 g, yet the density stays at 2.70 g cm⁻³.
- Change Material to Pine wood. The mass falls to 32.0 g and the density to 0.500 g cm⁻³, half that of water.
- Press Liquid, the third experiment button. The Empty cylinder card shows 104.3 g. Press Pour: with 50 cm³ of cooking oil added, the balance reads 150.3 g, so the working gives m = 46.0 g and ρ = 0.920 g cm⁻³.
- Switch on Zero the balance with the empty cylinder on it. The Empty cylinder card drops to 0.0 g, and the balance now shows the 46.0 g of oil by itself.