Skip to content

AQA · GCSE AQA

AQA GCSE Physics Specimen (sample set 1) Paper 1 Foundation (8463/1F)

Set by AQA for AQA GCSE Physics, Specimen (sample set 1): 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
Specimen (sample set 1)
Paper
Paper 1 Foundation
Code
8463/1F
Tier
Foundation
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
  5. 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A hairdryer has a power of 1.8 kW.

    From the topic: Power

    1. (a)State what is meant by a power of 1.8 kW.

      1 mark
      Show the answer

      Answer: The hairdryer transfers 1800 J of energy every second.

      Marking points

      • 1800 J of energy is transferred each second (accept 1.8 kJ per second).
    2. (b)Calculate the energy transferred by the hairdryer in 4.0 minutes.

      3 marks
      Show the answer

      Answer: P = 1800 W, t = 4.0 × 60 = 240 s. E = P t = 1800 × 240 = 432 000 J.

      Marking points

      • Converting units: 1800 W and 240 s
      • E = 1800 × 240
      • E = 432 000 J (accept 432 kJ)
    3. (c)A travel hairdryer transfers 216 000 J in the same 4.0 minutes. Calculate its power.

      2 marks
      Show the answer

      Answer: P = E ÷ t = 216 000 ÷ 240 = 900 W

      Marking points

      • P = 216 000 ÷ 240
      • P = 900 W
  2. 2.A student investigates how the resistance of an LDR changes with light intensity. A lamp is placed at different distances from the LDR in a darkened room.

    From the topic: LDRs and thermistors

    1. (a)Give the independent variable in this investigation.

      1 mark
      Show the answer

      Answer: The light intensity (controlled by the distance of the lamp from the LDR).

      Marking points

      • Light intensity (accept distance between lamp and LDR).
    2. (b)Describe how an ammeter and a voltmeter should be connected to find the resistance of the LDR.

      2 marks
      Show the answer

      Answer: The ammeter is connected in series with the LDR. The voltmeter is connected in parallel across the LDR.

      Marking points

      • Ammeter in series with the LDR.
      • Voltmeter in parallel across the LDR.
    3. (c)Describe the result the student should expect as the lamp is moved closer to the LDR.

      1 mark
      Show the answer

      Answer: The light intensity increases, so the resistance of the LDR decreases.

      Marking points

      • Resistance of the LDR decreases (as light intensity increases).
  3. 3.The heating element of an electric iron has a resistance of 46 Ω. While the iron is in use, the current in the element is 5.0 A.

    From the topic: Electrical power

    1. (a)Calculate the power transferred by the heating element.

      2 marks
      Show the answer

      Answer: P = I²R = 5.0² × 46 = 25 × 46 = 1150 W

      Marking points

      • P = 5.0² × 46
      • P = 1150 W (accept 1200 W, as the data are given to 2 significant figures)
    2. (b)Calculate the potential difference across the element.

      2 marks
      Show the answer

      Answer: V = IR = 5.0 × 46 = 230 V

      Marking points

      • V = 5.0 × 46
      • V = 230 V
    3. (c)The element is replaced with one of resistance 23 Ω, which is used on the same 230 V supply. Calculate the new power of the iron.

      3 marks
      Show the answer

      Answer: I = V ÷ R = 230 ÷ 23 = 10 A. P = VI = 230 × 10 = 2300 W (or P = I²R = 10² × 23 = 2300 W). Halving the resistance on the same p.d. doubles the power.

      Marking points

      • I = 230 ÷ 23 = 10 A
      • P = 230 × 10 or P = 10² × 23
      • P = 2300 W
  4. 4.A café worker puts 0.040 kg of ice at 0 °C into 0.25 kg of lemonade at 20 °C. Specific latent heat of fusion of ice = 334 000 J/kg. Specific heat capacity of lemonade = 4200 J/kg °C.

    From the topic: Specific latent heat

    1. (a)Calculate the energy needed to melt all of the ice.

      2 marks
      Show the answer

      Answer: E = m L = 0.040 × 334 000 = 13 360 J (about 13 000 J)

      Marking points

      • E = 0.040 × 334 000
      • E = 13 360 J (accept 13 400 J or 13 000 J)
    2. (b)Assume all of this energy comes from the lemonade. Calculate the fall in temperature of the lemonade caused by melting the ice. Ignore the energy needed to warm the meltwater.

      3 marks
      Show the answer

      Answer: Δθ = E ÷ (m c) = 13 360 ÷ (0.25 × 4200) = 12.7 °C (about 13 °C)

      Marking points

      • Rearranging ΔE = m c Δθ to Δθ = ΔE ÷ (m c)
      • Δθ = 13 360 ÷ (0.25 × 4200) (allow their energy)
      • Δθ = 12.7 °C (accept 13 °C)
    3. (c)Explain why ice at 0 °C cools a drink more than the same mass of water at 0 °C.

      2 marks
      Show the answer

      Answer: The ice must take in energy to melt (latent heat of fusion) before it can warm up. So more energy is transferred from the drink to the ice than to cold water, and the drink cools more.

      Marking points

      • Ice needs energy to melt / change state (latent heat), as well as energy to warm up.
      • So more energy is transferred away from the drink, and its temperature falls further.
  5. 5.A technician in a laboratory works with a liquid that contains an isotope which emits alpha particles. A few drops of the liquid splash onto one of the technician's gloves.

    From the topic: Contamination and irradiation

    1. (a)Is the glove irradiated or contaminated? Give a reason for your answer.

      2 marks
      Show the answer

      Answer: Contaminated, because radioactive material is now on the glove and its atoms will keep decaying there.

      Marking points

      • Contaminated
      • Radioactive material / atoms are now on the glove (and keep decaying)
    2. (b)Explain why the alpha emitter on the outside of the glove is not very hazardous to the technician.

      2 marks
      Show the answer

      Answer: Alpha particles are stopped by the glove, by a short gap of air, or by the layer of dead cells on the surface of the skin. So they cannot reach the technician's living cells.

      Marking points

      • Alpha is absorbed by the glove / dead skin cells / a few cm of air
      • So it does not reach living cells
    3. (c)Explain why the same isotope would be very hazardous if the technician swallowed some of it.

      3 marks
      Show the answer

      Answer: Inside the body the isotope would be right next to living tissue. Alpha particles are strongly ionising, so all their energy would be absorbed by nearby cells, damaging or killing them, which could lead to cancer. The atoms would keep decaying inside the body until they had decayed or been removed.

      Marking points

      • The source would be inside the body, next to living cells / tissue
      • Alpha is strongly ionising (all its energy is absorbed by nearby cells)
      • So cells are damaged or killed / could become cancerous (allow: exposure continues until the atoms decay or leave the body)
    4. (d)The technician already wears gloves. Give two other precautions that reduce the risk of the technician becoming contaminated.

      2 marks
      Show the answer

      Answer: Any two from: wear a lab coat and eye protection; never eat or drink in the laboratory; wash hands after the work; check hands and surfaces with a detector; handle the liquid in a tray so spills are contained.

      Marking points

      • First precaution, e.g. lab coat / eye protection, or a tray to contain spills
      • Second precaution, e.g. no eating or drinking, washing hands, or checking with a detector
  6. 6.A student uses a Geiger–Müller tube and counter in a school laboratory. With no source nearby, the counter records 54 counts in 3 minutes. A radioactive source is then placed in front of the tube, and the counter records 2316 counts in 4 minutes.

    From the topic: Uses and hazards of radiation Physics only

    1. (a)Give two natural sources of background radiation.

      2 marks
      Show the answer

      Answer: Any two from: rocks or soil (including radon gas from the ground), cosmic rays from space, radioactive isotopes in food, drink or the body.

      Marking points

      • First natural source, e.g. rocks / radon gas
      • Second natural source, e.g. cosmic rays / food and drink
    2. (b)Calculate the corrected count rate due to the source alone, in counts per minute.

      3 marks
      Show the answer

      Answer: Background = 54 ÷ 3 = 18 counts per minute. With the source = 2316 ÷ 4 = 579 counts per minute. Corrected count rate = 579 − 18 = 561 counts per minute.

      Marking points

      • Background count rate = 18 counts per minute
      • Count rate with the source = 579 counts per minute
      • Corrected count rate = 561 counts per minute
    3. (c)A school in another town measures a higher background count rate. Suggest a reason for this.

      2 marks
      Show the answer

      Answer: The ground under that town may contain rocks such as granite, which give off more radon gas, so more radiation reaches the detector.

      Marking points

      • Different rocks under the town (e.g. granite) (allow: the town is at a higher altitude)
      • Which release more radon gas / give off more radiation (allow: where cosmic rays are more intense)