Skip to content

AQA · GCSE AQA

AQA GCSE Physics Specimen (sample set 1) Paper 1 Higher (8463/1H)

Set by AQA for AQA GCSE Physics, Specimen (sample set 1): 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
Specimen (sample set 1)
Paper
Paper 1 Higher
Code
8463/1H
Tier
Higher
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
  5. 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

8 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A shop worker lifts a 14 kg box of tins up onto a shelf 1.6 m above the floor and leaves it there. Gravitational field strength = 9.8 N/kg.

    From the topic: Energy stores and systems

    1. (a)State what is meant by a system.

      1 mark
      Show the answer

      Answer: An object or a group of objects.

      Marking points

      • An object or group of objects (that is being studied).
    2. (b)Name the way in which energy is transferred to the box as it is lifted.

      1 mark
      Show the answer

      Answer: By work done by a force (mechanically).

      Marking points

      • Work done by a force (accept mechanically).
    3. (c)Calculate the increase in the energy in the box's gravitational potential store.

      2 marks
      Show the answer

      Answer: E_p = m g h = 14 × 9.8 × 1.6 = 219.52 J, about 220 J

      Marking points

      • E_p = 14 × 9.8 × 1.6
      • E_p = 219.52 J (accept 220 J)
    4. (d)The energy transferred from the chemical store of the worker's muscles is more than your answer. Suggest why.

      1 mark
      Show the answer

      Answer: Some energy is dissipated by heating the worker's body and the surroundings.

      Marking points

      • Some energy is dissipated to thermal stores (the worker's body warms up).
  2. 2.An electric motor lifts a crate of mass 25 kg through a height of 4.0 m. While doing this, the motor transfers 1400 J of energy electrically. Gravitational field strength = 9.8 N/kg.

    From the topic: Efficiency

    1. (a)Write down the equation that links efficiency, useful output energy transfer and total input energy transfer.

      1 mark
      Show the answer

      Answer: efficiency = useful output energy transfer ÷ total input energy transfer

      Marking points

      • efficiency = useful output energy transfer ÷ total input energy transfer
    2. (b)Calculate the useful energy transferred to the crate's gravitational potential store.

      2 marks
      Show the answer

      Answer: E_p = 25 × 9.8 × 4.0 = 980 J

      Marking points

      • E_p = 25 × 9.8 × 4.0
      • E_p = 980 J
    3. (c)Calculate the efficiency of the motor. Give your answer as a percentage.

      3 marks
      Show the answer

      Answer: efficiency = 980 ÷ 1400 = 0.70, which is 70%

      Marking points

      • efficiency = 980 ÷ 1400 (allow their useful energy from the part above)
      • = 0.70
      • = 70%
    4. (d)Calculate the energy wasted by the motor.

      1 mark
      Show the answer

      Answer: 1400 − 980 = 420 J

      Marking points

      • 420 J
  3. 3.A circuit diagram for a dimmer switch includes a component drawn as a rectangle with a diagonal arrow across it.

    From the topic: Circuit symbols

    1. (a)Name this component.

      1 mark
      Show the answer

      Answer: Variable resistor.

      Marking points

      • Variable resistor (accept rheostat).
    2. (b)Explain why this component is included in a circuit used to measure the resistance of a component.

      2 marks
      Show the answer

      Answer: Changing its resistance changes the current in the circuit, so several pairs of current and p.d. readings can be taken.

      Marking points

      • Its resistance can be changed, which changes the current (and p.d.).
      • So a range of readings can be taken (or readings can be repeated).
  4. 4.A bicycle lamp runs from a battery. A table lamp runs from the UK mains supply.

    From the topic: Mains electricity

    1. (a)Name the type of potential difference provided by the battery.

      1 mark
      Show the answer

      Answer: Direct potential difference (d.c.).

      Marking points

      • direct (allow d.c.)
    2. (b)Explain how the potential difference of the mains supply is different from the potential difference of the battery.

      2 marks
      Show the answer

      Answer: The mains p.d. is alternating: it reverses its direction many times each second. The battery's p.d. is direct: it always acts in the same direction, so its current flows one way only.

      Marking points

      • the mains p.d. keeps reversing direction / is alternating
      • the battery's p.d. always acts in the same direction / is direct
    3. (c)Give the frequency and the potential difference of the UK mains supply.

      2 marks
      Show the answer

      Answer: Frequency: 50 Hz. Potential difference: about 230 V.

      Marking points

      • 50 Hz
      • (about) 230 V
  5. 5.A 2.3 kW heater is plugged into an extension lead. The current in the lead is 10 A. The copper wires inside the lead have a total resistance of 0.15 Ω.

    From the topic: Electrical power

    1. (a)Calculate the power transferred by heating in the wires of the lead.

      2 marks
      Show the answer

      Answer: P = I²R = 10² × 0.15 = 15 W

      Marking points

      • P = 10² × 0.15
      • P = 15 W
    2. (b)A student uses P = VI with V = 230 V and I = 10 A to find the power heating the lead, and gets 2300 W. Explain why this is wrong.

      2 marks
      Show the answer

      Answer: 230 V is the p.d. of the supply, and almost all of it is across the heater, not across the wires of the lead. So 230 V × 10 A gives the power of the heater, not the much smaller power heating the lead.

      Marking points

      • 230 V is not the p.d. across the wires of the lead (it is across the heater / supply).
      • So the result is the heater's power, not the power heating the lead.
  6. 6.A diving cylinder is filled with compressed air at 15 °C. It is left in the boot of a car parked in strong sunshine, and the air inside warms to 45 °C. The volume of the cylinder does not change.

    From the topic: Particle motion in gases

    1. (a)Explain how the air molecules produce a pressure inside the cylinder.

      2 marks
      Show the answer

      Answer: The molecules keep colliding with the inner walls of the cylinder, and every collision gives the wall a small push. Added together, these pushes make a force on each square metre of wall, which is the pressure.

      Marking points

      • The molecules collide with (hit) the walls of the cylinder.
      • Each collision exerts a force on the wall; the force per unit area is the pressure.
    2. (b)Explain why the pressure of the air inside the cylinder increases as it warms.

      3 marks
      Show the answer

      Answer: A higher temperature means the molecules have a greater average kinetic energy, so they move faster. They collide with the walls more frequently, and each collision exerts a bigger force. The volume cannot change, so the force on each square metre of wall, the pressure, increases.

      Marking points

      • The molecules gain average kinetic energy, so they move faster.
      • They hit the walls more often (more frequent collisions).
      • Each collision exerts a bigger force, so the pressure (force per unit area) increases.
    3. (c)A student says that the pressure will be three times as big, because 45 °C is three times 15 °C. Explain why the student is wrong.

      2 marks
      Show the answer

      Answer: The pressure rises by only a small fraction (about 10%). The molecules at 15 °C are already moving fast, since 0 °C is not where they stop, so tripling the number in °C does not triple their average kinetic energy.

      Marking points

      • The pressure increases by only a small amount, not three times.
      • Molecules at 15 °C already have a lot of kinetic energy (0 °C is not where molecules stop moving), so Celsius values cannot be used as a ratio.
  7. 7.A paper mill uses a radioactive source and a detector to check the thickness of the paper it makes. The source is above the moving sheet of paper and the detector is below it.

    From the topic: Radioactive decay and nuclear radiation

    1. (a)Explain why a beta source is used, rather than an alpha source or a gamma source.

      4 marks
      Show the answer

      Answer: Alpha would be stopped by the paper, so nothing would reach the detector. Gamma would pass through almost all of it whatever the thickness, so the reading would barely change. Beta is partly absorbed by paper, and the amount absorbed depends on the thickness, so the count rate changes noticeably when the thickness changes.

      Marking points

      • Alpha would be absorbed / stopped completely by the paper
      • Gamma would pass through with (almost) no change in count rate
      • Beta is partly absorbed by paper
      • The amount of beta absorbed depends on the thickness, so changes in the count rate show changes in thickness
    2. (b)The paper coming out of the rollers becomes thicker. State what happens to the count rate at the detector.

      1 mark
      Show the answer

      Answer: It decreases, because more beta particles are absorbed.

      Marking points

      • Decreases
    3. (c)Gamma rays are emitted from some nuclei. Name the type of wave that gamma rays are.

      1 mark
      Show the answer

      Answer: Electromagnetic waves.

      Marking points

      • Electromagnetic
  8. 8.Radon-222 is a radioactive gas given off by granite and some other rocks. A radon-222 nucleus, ²²²₈₆Rn, decays by alpha emission to form a nucleus of polonium (Po).

    From the topic: Nuclear equations

    1. (a)Give the symbol for an alpha particle, as it is written in a nuclear equation.

      1 mark
      Show the answer

      Answer: ⁴₂He

      Marking points

      • ⁴₂He (mass number 4 on top, 2 below)
    2. (b)Determine the mass number and the atomic number of the polonium nucleus.

      2 marks
      Show the answer

      Answer: Mass number: 222 − 4 = 218. Atomic number: 86 − 2 = 84. The nucleus is ²¹⁸₈₄Po.

      Marking points

      • Mass number 218
      • Atomic number 84
    3. (c)Describe how the mass and the charge of a nucleus change when it emits an alpha particle.

      2 marks
      Show the answer

      Answer: Both go down. The mass number falls by 4, and the charge (the atomic number) falls by 2.

      Marking points

      • Mass (number) decreases (by 4)
      • Charge (atomic number) decreases (by 2)