AQA · GCSE AQA
AQA GCSE Physics November 2020 Paper 1 Higher (8463/1H)
Set by AQA for AQA GCSE Physics, November 2020: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- November 2020
- Paper
- Paper 1 Higher
- Code
- 8463/1H
- Tier
- Higher
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner report(opens AQA’s website)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Energy
Energy stores and systems · Kinetic and potential energy · Specific heat capacity · Power · Conservation and dissipation of energy · Efficiency · Energy resources
Energy stores and transfersEnergy skate trackSpecific heat capacityPower and efficiency
- Electricity
Circuit symbols · Electrical charge and current · Current, resistance and potential difference · I–V characteristics · LDRs and thermistors · Series and parallel circuits · Mains electricity · Electrical power · Energy transfers in appliances · The National Grid · Static electricity and electric fields
Circuit builderCharge, current, energy and powerResistance of a wireI–V characteristics
- Particle model of matter
Density · Changes of state · Internal energy · Specific latent heat · Particle motion in gases · Pressure in gases
Measuring densityParticle model and states of matterLatent heat and heating curvesGas laws and particles
- Atomic structure
Structure of the atom · Mass number and isotopes · Development of the atomic model · Radioactive decay and nuclear radiation · Nuclear equations · Half-life · Contamination and irradiation · Uses and hazards of radiation · Nuclear fission and fusion
Isotopes and atom builderAtomic models and Rutherford scatteringAlpha, beta and gamma radiationNuclear equations
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.Two students, A and B, each do the specific heat capacity required practical with the same aluminium block. The accepted value for aluminium is 900 J/kg °C. Student A's three values are 1240, 1250 and 1245 J/kg °C. Student B's three values are 840, 960 and 905 J/kg °C.
From the topic: Accuracy, precision and errors
(a)Whose results are more precise? Give a reason.
2 marksShow the answerHide the answer
Answer: Student A. A's three values lie within 10 J/kg °C of one another, while B's are spread over 120 J/kg °C.
Marking points
- Student A
- A's values are much closer together (range 10 J/kg °C compared with 120 J/kg °C)
(b)Whose mean is more accurate? Give a reason.
2 marksShow the answerHide the answer
Answer: Student B. B's mean is about 902 J/kg °C, very close to 900 J/kg °C, but A's mean is 1245 J/kg °C.
Marking points
- Student B
- B's mean (about 902 J/kg °C) is much nearer the accepted value than A's (1245 J/kg °C)
(c)Every one of Student A's values is about 350 J/kg °C too high. Suggest a cause of this error and how it could be reduced.
2 marksShow the answerHide the answer
Answer: Energy was transferred from the block to the surroundings, so the block warmed up less than expected, which makes each calculated value too high. Wrap the block in insulation.
Marking points
- Energy lost to the surroundings (block not insulated), so the block warmed up too little. Also accept: poor thermal contact between the thermometer and the block, so the measured temperature rise is too small
- Insulate the block, e.g. wrap it in cotton wool or bubble wrap (or, for poor contact, put a little oil or water in the thermometer hole)
(d)Explain why Student A would not get a more accurate mean by taking more repeat readings.
2 marksShow the answerHide the answer
Answer: This is a systematic error: it pushes every value too high by a similar amount. Averaging more values only reduces the effect of random error, so the mean would still be about 350 J/kg °C too high.
Marking points
- The error is systematic: every value is too high by about the same amount
- Averaging reduces only random error, so the mean stays about 350 J/kg °C too high
2.An electric motor lifts a crate of mass 25 kg through a height of 4.0 m. While doing this, the motor transfers 1400 J of energy electrically. Gravitational field strength = 9.8 N/kg.
From the topic: Efficiency
(a)Write down the equation that links efficiency, useful output energy transfer and total input energy transfer.
1 markShow the answerHide the answer
Answer: efficiency = useful output energy transfer ÷ total input energy transfer
Marking points
- efficiency = useful output energy transfer ÷ total input energy transfer
(b)Calculate the useful energy transferred to the crate's gravitational potential store.
2 marksShow the answerHide the answer
Answer: E_p = 25 × 9.8 × 4.0 = 980 J
Marking points
- E_p = 25 × 9.8 × 4.0
- E_p = 980 J
(c)Calculate the efficiency of the motor. Give your answer as a percentage.
3 marksShow the answerHide the answer
Answer: efficiency = 980 ÷ 1400 = 0.70, which is 70%
Marking points
- efficiency = 980 ÷ 1400 (allow their useful energy from the part above)
- = 0.70
- = 70%
(d)Calculate the energy wasted by the motor.
1 markShow the answerHide the answer
Answer: 1400 − 980 = 420 J
Marking points
- 420 J
3.The table lamp has a metal base. It is connected to the mains by a three-core cable.
From the topic: Mains electricity
(a)Give the colour of the insulation on the live wire and on the earth wire.
2 marksShow the answerHide the answer
Answer: Live: brown. Earth: green and yellow stripes.
Marking points
- live: brown
- earth: green and yellow (stripes)
(b)State the potential difference between the neutral wire and earth.
1 markShow the answerHide the answer
Answer: 0 V, or very close to 0 V.
Marking points
- 0 V (allow close to 0 V)
(c)State when there is a current in the earth wire.
1 markShow the answerHide the answer
Answer: Only when there is a fault, for example when the live wire touches the metal base.
Marking points
- only when there is a fault (e.g. the live wire touching the metal base)
(d)Explain why the earth wire is described as a safety wire.
2 marksShow the answerHide the answer
Answer: It is connected to the metal base and keeps the base at 0 V. So a fault cannot make the base live, and someone touching it does not get a shock.
Marking points
- it is connected to the metal base / case
- it stops the base becoming live (keeps it at 0 V), so a user does not get a shock
4.A kitchen has an electric kettle with a power rating of 3.0 kW and a food mixer with a power rating of 0.40 kW. Both are plugged into the mains.
From the topic: Energy transfers in appliances
(a)Calculate the energy transferred by the kettle in 2.0 minutes.
2 marksShow the answerHide the answer
Answer: P = 3000 W and t = 120 s. E = Pt = 3000 × 120 = 360 000 J
Marking points
- E = 3000 × 120
- E = 360 000 J
(b)Describe and compare the energy transfers in the kettle and in the food mixer when each is used for 2.0 minutes. Refer to energy stores and to the power ratings in your answer.
6 marksShow the answerHide the answer
Answer: In both appliances, energy is transferred electrically from the mains, because the current does work. In the kettle, the current heats the element, so the thermal store of the element increases and energy then passes by heating to the thermal store of the water. In the mixer, the motor turns the blades, so the energy goes mainly to the kinetic store of the motor and the blades. Neither transfer is perfect: the kettle also warms its own body and the air, and the mixer's motor heats up and makes sound, so some energy is dissipated to the surroundings. In 2.0 minutes the kettle transfers 360 000 J but the mixer only 400 × 120 = 48 000 J. The kettle's power rating is 7.5 times bigger, so in the same time it transfers 7.5 times as much energy. (This part is marked by levels of response: the examiner judges your answer overall and decides which level it fits, instead of giving one mark per point. A clear, linked answer that covers both appliances, their stores, the wasted energy and the effect of the power ratings, like this one, reaches the top level.)
Marking points
- Energy is transferred electrically from the mains (the current does work) in both appliances.
- Kettle: the thermal store of the heating element increases, then the thermal store of the water.
- Mixer: energy goes mainly to the kinetic store of the motor and blades.
- Some energy is dissipated in both, e.g. heating the surroundings, or sound from the mixer.
- In 2.0 minutes the mixer transfers 48 000 J, compared with 360 000 J for the kettle.
- The kettle transfers more energy in the same time because its power rating is higher (7.5 times higher).
5.A student wants to find the density of a small stone with an irregular shape. The student has a top-pan balance, a measuring cylinder, a eureka can, some water and a length of thread.
From the topic: Density
(a)Describe how the student could use this apparatus to determine the density of the stone.
6 marksShow the answerHide the answer
Answer: Measure the mass of the dry stone on the top-pan balance. Part-fill the measuring cylinder with water and read the volume at the bottom of the meniscus, with the eye level with it. Tie the thread to the stone and lower it gently until it is completely under the water. Read the new volume. The volume of the stone is the new reading minus the first reading. (If the stone does not fit, fill the eureka can to its spout and collect the water that overflows in the measuring cylinder.) Calculate density = mass ÷ volume. Repeat and find a mean. (AQA marks 6-mark questions as a whole, by level of response. The marking points below show what a top-level answer covers.)
Marking points
- Mass of the stone measured on the top-pan balance.
- Measuring cylinder part-filled with water and the starting volume read (at the bottom of the meniscus, eye level).
- Stone lowered on the thread until fully submerged, and the new volume read.
- Volume of the stone = final reading − starting reading (or the volume of water collected from a full eureka can).
- Density calculated using density = mass ÷ volume.
- Measurements repeated and a mean calculated (or units consistent, such as g and cm³ giving g/cm³).
(b)Explain why the student should lower the stone into the measuring cylinder on the thread rather than dropping it in.
2 marksShow the answerHide the answer
Answer: Dropping the stone could crack or break the measuring cylinder. It could also splash water out, so the second reading, and so the volume, would be too small.
Marking points
- The stone could crack or break the glass (a safety risk).
- Water could splash out, making the measured volume too small.
(c)Some air bubbles stay stuck to the stone under the water. Explain the effect this has on the student's value for density.
2 marksShow the answerHide the answer
Answer: The bubbles also push water aside, so the measured volume is larger than the stone's real volume. Dividing the mass by too large a volume gives a density that is too small.
Marking points
- The measured volume is too large (the bubbles displace water as well).
- So the calculated density is too small.
6.Americium-241 is used in smoke alarms. Its nuclei are unstable and emit alpha particles.
From the topic: Radioactive decay and nuclear radiation
(a)Describe what an alpha particle is made of.
2 marksShow the answerHide the answer
Answer: It consists of two protons and two neutrons: the same particles as a helium nucleus.
Marking points
- Two protons
- Two neutrons (allow: a helium nucleus, for both marks)
(b)The decay of americium-241 nuclei is random. Explain what this means.
2 marksShow the answerHide the answer
Answer: It is impossible to predict which nucleus will decay next, or when any particular nucleus will decay.
Marking points
- Cannot predict which nucleus will decay (next)
- Cannot predict when a given nucleus will decay
(c)The americium-241 in one smoke alarm has an activity of 37 000 Bq. State what this tells you.
2 marksShow the answerHide the answer
Answer: 37 000 nuclei in the sample decay every second.
Marking points
- 37 000 nuclei decay / 37 000 decays
- Each second
(d)Explain why an alpha source is suitable for a smoke alarm used in a home.
3 marksShow the answerHide the answer
Answer: Alpha is strongly ionising, so it ionises the air inside the alarm's chamber. It has a range in air of only a few centimetres and is stopped by thin materials, so it is absorbed inside the alarm and does not reach people in the room.
Marking points
- Alpha is strongly ionising, so it ionises the air in the alarm
- Short range in air (a few cm) / absorbed by a thin layer such as the case
- So the radiation does not escape to reach people in the room