Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2024 Paper 1 Higher (8463/1H)

Set by AQA for AQA GCSE Physics, June 2024: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2024
Paper
Paper 1 Higher
Code
8463/1H
Tier
Higher
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.Two students each measure the thickness of the same coin four times with their own micrometer. The true thickness of the coin is 1.85 mm. Student A records 1.84 mm, 1.86 mm, 1.85 mm and 1.85 mm. Student B records 1.95 mm, 1.96 mm, 1.95 mm and 1.96 mm.

    From the topic: Measuring instruments

    1. (a)Give the resolution of the micrometers used.

      1 mark
      Show the answer

      Answer: 0.01 mm

      Marking points

      • 0.01 mm
    2. (b)Which student's readings are more accurate? Give a reason for your answer.

      2 marks
      Show the answer

      Answer: Student A. The mean of A's readings is 1.85 mm, the same as the true value, while B's mean (about 1.96 mm) is about 0.1 mm too large.

      Marking points

      • Student A
      • A's readings (mean 1.85 mm) are closer to the true value.
    3. (c)A teacher says that Student B's readings are precise. Explain what this means.

      1 mark
      Show the answer

      Answer: The repeat readings are very close to each other: they spread over only 0.01 mm.

      Marking points

      • The readings are close together / cluster closely (range only 0.01 mm).
    4. (d)Suggest the most likely cause of the error in Student B's readings, and how Student B could correct the results.

      2 marks
      Show the answer

      Answer: Student B's micrometer probably has a zero error of about +0.10 mm. B should close the micrometer with nothing in it, read the zero error, and subtract it from every reading.

      Marking points

      • A zero error (systematic error) in Student B's micrometer.
      • Close the micrometer with nothing between the jaws, read the zero error and subtract it from each reading.
  2. 2.A 2.2 kW electric kettle heats 0.50 kg of water from 18 °C to 100 °C in 90 s. Specific heat capacity of water = 4200 J/kg °C.

    From the topic: Energy stores and systems

    1. (a)Name the energy store of the water that increases as it heats up.

      1 mark
      Show the answer

      Answer: The thermal energy store of the water.

      Marking points

      • Thermal (energy) store
    2. (b)Calculate the energy transferred electrically to the kettle in 90 s.

      2 marks
      Show the answer

      Answer: E = P t = 2200 × 90 = 198 000 J

      Marking points

      • E = 2200 × 90 (power changed to watts)
      • E = 198 000 J
    3. (c)Calculate the increase in the thermal energy of the water.

      2 marks
      Show the answer

      Answer: ΔE = m c Δθ = 0.50 × 4200 × 82 = 172 200 J

      Marking points

      • ΔE = 0.50 × 4200 × 82 (temperature change of 82 °C)
      • ΔE = 172 200 J (accept 172 000 J)
    4. (d)The two answers above are different. Calculate the difference and explain where this energy has gone.

      2 marks
      Show the answer

      Answer: 198 000 − 172 200 = 25 800 J. It has been transferred by heating to the thermal stores of the kettle itself and the surrounding air.

      Marking points

      • Difference = 25 800 J (allow their values from the parts above)
      • It went to the thermal stores of the kettle and the surroundings (it was dissipated).
  3. 3.A washing machine has a metal case and is connected to the mains by a three-core cable. Inside the machine, the live wire comes loose and touches the metal case.

    From the topic: Mains electricity

    1. (a)Explain what happens when a person touches the case (i) if the earth wire is connected and (ii) if the earth wire is broken. Use ideas about potential difference and current in your answer.

      6 marks
      Show the answer

      Answer: (i) The earth wire joins the case to earth, so the case stays at (close to) 0 V and does not become live. The live wire is now connected to earth through a path of very low resistance, so a large current flows from the live wire through the case and down the earth wire. The person is also at 0 V, so there is almost no p.d. across them and no current through them. (Not required by the AQA specification, but worth credit: the large current melts the fuse or trips a circuit breaker, which cuts off the live supply.) (ii) With the earth wire broken, nothing carries current away from the case, so the machine may seem to work normally, but the case is now at about 230 V. The person is at about 0 V, so there is a p.d. of about 230 V across their body. A current flows through them to earth: an electric shock, which could be fatal. Switching the machine off may not help if the fault is on the supply side of its switch. (Level-of-response question: the whole answer is read and placed in a level, rather than points being ticked off one by one. Level 3, 5–6 marks: a clear, logical explanation of both cases that links the p.d. across the person to whether a current flows through them. Level 2, 3–4 marks: both cases described with some explanation, or one case explained fully. Level 1, 1–2 marks: simple statements, such as 'the earth wire makes it safe' or 'the person gets a shock'. 0 marks: no relevant content.)

      Marking points

      • Earth wire connected: the case is kept at (about) 0 V, so it does not become live.
      • A large current flows from the live wire through the case and down the low-resistance earth wire.
      • The person and the case are both at about 0 V, so there is almost no p.d. across the person and no current through them.
      • Earth wire broken: no current flows to earth, but the case is now at about 230 V (it is live).
      • The person is at about 0 V, so there is a p.d. of about 230 V across their body.
      • A current flows through the person to earth: an electric shock, which could be fatal. (Also credit, beyond the specification: in (i) the large current melts the fuse or trips a circuit breaker.)
  4. 4.An ice-cube tray holds 0.27 kg of water. The tray is put in a freezer until the water freezes. Density of water = 1000 kg/m³. Density of ice = 920 kg/m³.

    From the topic: Changes of state

    1. (a)State the mass of the ice.

      1 mark
      Show the answer

      Answer: 0.27 kg

      Marking points

      • 0.27 kg (mass is conserved)
    2. (b)Give the equation linking density, mass and volume.

      1 mark
      Show the answer

      Answer: Density equals mass divided by volume: ρ = m ÷ V

      Marking points

      • density = mass ÷ volume (in words or in symbols)
    3. (c)Calculate the increase in volume when the water freezes. Give your answer in m³.

      4 marks
      Show the answer

      Answer: Volume of water = 0.27 ÷ 1000 = 2.7 × 10⁻⁴ m³. Volume of ice = 0.27 ÷ 920 = 2.93 × 10⁻⁴ m³. Increase = 2.93 × 10⁻⁴ − 2.7 × 10⁻⁴ = 2.3 × 10⁻⁵ m³

      Marking points

      • Volume of water = 0.27 ÷ 1000 = 2.7 × 10⁻⁴ m³
      • Volume of ice = 0.27 ÷ 920 = 2.93 × 10⁻⁴ m³
      • Subtracting the volume of water from the volume of ice
      • Increase = 2.3 × 10⁻⁵ m³ (accept 2.35 × 10⁻⁵ m³)
    4. (d)Suggest why the tray is not filled right to the top with water.

      2 marks
      Show the answer

      Answer: The water expands as it freezes, because the same mass of ice takes up a larger volume. A small gap leaves room for the extra volume, so the ice does not overflow or crack the tray.

      Marking points

      • The ice has a larger volume than the water (same mass, lower density).
      • A gap leaves room for the expansion, so the ice does not spill over or split the tray.
  5. 5.A student lets 0.025 kg of melted stearic acid cool in a boiling tube and records its temperature every 30 s. The temperature falls from 80 °C to 69 °C, stays at 69 °C for 6.0 minutes, then falls again. Specific latent heat of fusion of stearic acid = 2.0 × 10⁵ J/kg.

    From the topic: Specific latent heat

    1. (a)State the freezing point of the stearic acid.

      1 mark
      Show the answer

      Answer: 69 °C

      Marking points

      • 69 °C
    2. (b)Explain why the temperature stays at 69 °C for 6.0 minutes, even though the tube is still losing energy to the surroundings.

      2 marks
      Show the answer

      Answer: The stearic acid is freezing, and freezing releases energy (latent heat). This energy replaces the energy lost to the surroundings, so the temperature stays constant until all of the liquid has become solid.

      Marking points

      • The stearic acid is changing state (freezing), which releases energy / latent heat.
      • The energy released balances the energy lost to the surroundings, so the temperature does not fall.
    3. (c)Calculate the energy released while the stearic acid freezes.

      2 marks
      Show the answer

      Answer: E = m L = 0.025 × 2.0 × 10⁵ = 5000 J

      Marking points

      • E = 0.025 × 2.0 × 10⁵
      • E = 5000 J
    4. (d)Calculate the average rate at which the tube loses energy to the surroundings while the temperature stays at 69 °C.

      3 marks
      Show the answer

      Answer: t = 6.0 × 60 = 360 s. P = E ÷ t = 5000 ÷ 360 = 13.9 W (about 14 W)

      Marking points

      • t = 360 s
      • P = 5000 ÷ 360 (allow their energy)
      • P = 13.9 W (accept 14 W)
  6. 6.Higher tier. A laboratory sample of iodine-131 has an activity of 7200 Bq. The half-life of iodine-131 is 8 days.

    From the topic: Half-life

    1. (a)Calculate the number of half-lives in 24 days.

      1 mark
      Show the answer

      Answer: 24 ÷ 8 = 3 half-lives

      Marking points

      • 3
    2. (b)Calculate the activity of the sample after 24 days.

      2 marks
      Show the answer

      Answer: 7200 halved three times: 3600, 1800, then 900 Bq.

      Marking points

      • Halving three times (or 7200 × 1/8)
      • 900 Bq
    3. (c)Give the net decline in activity over the 24 days as a ratio of the final activity to the initial activity.

      1 mark
      Show the answer

      Answer: 900 : 7200 = 1 : 8

      Marking points

      • 1 : 8 (allow 900 : 7200, 1/8, 0.125 or 0.125 : 1)
    4. (d)Determine how many days it takes for the activity to fall from 7200 Bq to 225 Bq.

      2 marks
      Show the answer

      Answer: 7200 → 3600 → 1800 → 900 → 450 → 225 Bq is 5 half-lives, so the time is 5 × 8 = 40 days.

      Marking points

      • 5 half-lives (or 225 : 7200 = 1 : 32)
      • 40 days