AQA · GCSE AQA
AQA GCSE Physics June 2024 Paper 2 Foundation (8463/2F)
Set by AQA for AQA GCSE Physics, June 2024: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- June 2024
- Paper
- Paper 2 Foundation
- Code
- 8463/2F
- Tier
- Foundation
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens the page on AQA’s website that lists it)
- Mark scheme(opens the page on AQA’s website that lists it)
- Examiner report(opens the page on AQA’s website that lists it)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Forces
Scalar and vector quantities · Contact and non-contact forces · Gravity, weight and mass · Resultant forces · Work done and energy transfer · Forces and elasticity · Moments, levers and gears · Pressure in fluids · Pressure and depth in a liquid · Upthrust and floating · Atmospheric pressure
Adding and resolving vectorsDistance and displacementFree-body diagrams and resultant forceStatic and kinetic friction
- Forces and motion
Distance and displacement · Speed and velocity · Distance–time graphs · Acceleration · Velocity–time graphs · Free fall and terminal velocity · Newton's first law · Newton's second law · Newton's third law · Stopping distance and reaction time · Momentum and conservation of momentum · Changes in momentum
Distance and displacementMotion graphsCircular motionSUVAT equations of motion
- Waves
Transverse and longitudinal waves · Properties of waves · Reflection of waves · Sound waves · Ultrasound and seismic waves
Transverse and longitudinal wavesRipple tankReflection in a plane mirrorSound waves and the oscilloscope
- Electromagnetic waves
Electromagnetic spectrum · Refraction · Infrared radiation and surfaces · Uses and hazards of EM waves · Lenses · Visible light and colour · Black body radiation
Electromagnetic spectrumRefraction and Snell's lawRipple tankConduction, convection and radiation
- Magnetism and electromagnetism
Permanent and induced magnets · Magnetic fields · Electromagnetism and solenoids · Fleming's left-hand rule · Electric motors · Loudspeakers and microphones · Induced potential (generator effect) · Alternators and dynamos · Transformers
Magnetic field of a bar magnetMagnetic field around a wire and solenoidThe motor effectElectromagnetic induction
- Space physics
Our solar system · Life cycle of a star · Orbital motion and satellites · Red-shift and the Big Bang
Life cycle of starsOrbits and gravityRed-shift and the expanding universe
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A builder uses a long steel bar as a lever to lift the edge of a heavy stone. The bar rests on a brick, which acts as the pivot. The stone pushes down on the short end of the bar with a force of 960 N, 0.15 m from the pivot. The builder pushes down on the long end, 1.20 m from the pivot. Ignore the weight of the bar.
From the topic: Moments, levers and gears Physics only
(a)Calculate the force the builder must apply at right angles to the bar to balance the force from the stone.
3 marksShow the answerHide the answer
Answer: Moment of stone = 960 × 0.15 = 144 N m; F × 1.20 = 144, so F = 120 N.
Marking points
- Moment from the stone = 960 × 0.15 = 144 N m
- F × 1.20 = 144 (clockwise moment = anticlockwise moment)
- F = 120 N
(b)Explain how the lever lets the builder lift the stone with a much smaller force than the force from the stone.
2 marksShow the answerHide the answer
Answer: The builder pushes much further from the pivot than the stone is, so a small force produces a moment as large as the stone's moment.
Marking points
- The effort acts much further from the pivot than the load.
- So a smaller force produces an equal moment (moment = force × distance).
(c)The builder now pushes on the same point but at an angle to the bar instead of at right angles. Explain why a larger force is needed.
2 marksShow the answerHide the answer
Answer: The perpendicular distance from the pivot to the line of action of the force is now less than 1.20 m, so a larger force is needed to give the same moment of 144 N m.
Marking points
- The perpendicular distance from the pivot to the line of action of the force is smaller.
- So a larger force is needed to produce the same moment.
2.A lift in a Singapore office block rises from rest. It speeds up uniformly to 3.0 m/s in 2.0 s, travels at 3.0 m/s for 8.0 s, then slows uniformly to rest in 2.0 s.
From the topic: Velocity–time graphs
(a)Calculate the acceleration of the lift in the first 2.0 s.
2 marksShow the answerHide the answer
Answer: a = Δv ÷ t = 3.0 ÷ 2.0 = 1.5 m/s²
Marking points
- a = 3.0 ÷ 2.0
- a = 1.5 m/s²
(b)Describe the motion of the lift between 2.0 s and 10 s.
1 markShow the answerHide the answer
Answer: It moves at a constant velocity of 3.0 m/s.
Marking points
- Constant velocity (of 3.0 m/s) / zero acceleration.
(c)Higher tier. Sketch the velocity–time graph for the whole journey. Use the area under it to calculate how far the lift rises.
3 marksShow the answerHide the answer
Answer: Areas: ½ × 2.0 × 3.0 = 3.0 m; 8.0 × 3.0 = 24 m; ½ × 2.0 × 3.0 = 3.0 m. Total = 30 m
Marking points
- Area method used (triangle and rectangle areas).
- Correct parts: 3.0 m, 24 m and 3.0 m.
- Total = 30 m
3.A skydiver jumps from a hovering helicopter. The skydiver falls for some time before opening a parachute.
From the topic: Free fall and terminal velocity
(a)Name the force that acts upwards on the skydiver as they fall.
1 markShow the answerHide the answer
Answer: Air resistance (drag).
Marking points
- Air resistance (accept drag).
(b)Physics only. Explain why the velocity of the skydiver increases at first and then becomes constant before the parachute opens.
4 marksShow the answerHide the answer
Answer: At first the weight is bigger than the air resistance, so the resultant force is downwards and the skydiver accelerates. As the speed increases, the air resistance increases, so the resultant force (and the acceleration) decreases. Eventually the air resistance equals the weight, so the resultant force is zero and the velocity is constant: terminal velocity.
Marking points
- Weight is greater than air resistance at first, so there is a downward resultant force and the skydiver accelerates.
- Air resistance increases as the speed increases.
- The resultant force decreases, so the acceleration decreases.
- Air resistance becomes equal to the weight, so the resultant force is zero and the velocity stays constant (terminal velocity).
4.A loudspeaker on a stage plays a steady note. The sound travels through the air to an audience 20 m away.
From the topic: Transverse and longitudinal waves
(a)What type of wave is sound in air?
1 markShow the answerHide the answer
Answer: Longitudinal.
Marking points
- Longitudinal.
(b)Describe how the air particles between the stage and the audience move as the sound passes through them.
2 marksShow the answerHide the answer
Answer: Each air particle oscillates backwards and forwards about a fixed position, with no overall movement towards the audience. The oscillations are parallel to the direction in which the sound transfers energy.
Marking points
- Particles oscillate (vibrate) about a fixed position and do not move overall towards the audience.
- The oscillations are parallel to the direction of energy transfer (the direction the sound travels).
(c)The sound wave contains compressions and rarefactions. Describe the difference between a compression and a rarefaction.
2 marksShow the answerHide the answer
Answer: In a compression the air particles are closer together than normal, so the pressure is a little higher. In a rarefaction they are further apart than normal, so the pressure is a little lower.
Marking points
- Compression: particles closer together than normal (higher pressure).
- Rarefaction: particles further apart than normal (lower pressure).
(d)Sound travels through the air at 330 m/s. Calculate the time the sound takes to reach the audience.
3 marksShow the answerHide the answer
Answer: t = s ÷ v = 20 ÷ 330 = 0.061 s
Marking points
- t = s ÷ v (s = v t rearranged)
- t = 20 ÷ 330
- t = 0.061 s (accept 0.06 s)
5.Convex and concave lenses both refract light, but the images they form are different.
From the topic: Lenses Physics only
(a)Describe the similarities and differences between the images formed by convex and concave lenses. You may refer to ray diagrams in your answer.
6 marksShow the answerHide the answer
Answer: Both lenses refract light, and in both ray diagrams a ray aimed at the lens centre carries straight on. A convex lens makes parallel rays converge through the principal focus, while a concave lens makes them diverge as if from the principal focus on the object's side. With the object further away than the principal focus, a convex lens forms a real, inverted image on the far side, which can be shown on a screen; it can be diminished, the same size or magnified depending on the object's position. With the object closer than the principal focus, a convex lens forms a virtual, upright, magnified image on the same side as the object. A concave lens always forms a virtual, upright, diminished image on the same side as the object, between the principal focus and the lens. Virtual images cannot be shown on a screen, because the rays only appear to come from them. (Level-of-response marking: examiners compare the whole answer with level descriptors. The top level needs a clear comparison that covers both lenses, real and virtual images, and how the convex lens's image depends on where the object is.)
Marking points
- Both lenses refract light; a ray through the centre of either lens is not bent.
- Convex lens: parallel rays converge to the principal focus; concave lens: they diverge as if from the principal focus.
- Convex lens, object beyond the principal focus: real, inverted image on the far side of the lens.
- Convex lens, object closer than the principal focus: virtual, upright, magnified image on the object's side.
- Concave lens: the image is always virtual, upright and diminished, on the object's side.
- A real image can be shown on a screen; a virtual image cannot, because the light only appears to come from it.
6.(GCSE Physics only) A diagram shows a relay used to start a powerful motor in a factory. Circuit 1 contains a push switch, a low-voltage battery and the relay's coil, which is wound on an iron core. An iron armature on a pivot sits above the core, held up by a spring. When the armature is pulled down, its other end pushes two contacts together in circuit 2, which contains the motor and the mains supply.
From the topic: Electromagnetism and solenoids
(a)Explain how pressing the push switch makes the motor start.
4 marksShow the answerHide the answer
Answer: A current flows in the coil, so the coil and its iron core become an electromagnet. The electromagnet attracts the iron armature, which turns about the pivot, and the armature's far end presses the contacts together. This completes circuit 2, so a current flows through the motor.
Marking points
- Current in the coil makes a magnetic field (the core becomes an electromagnet).
- The iron armature is attracted towards the core.
- The armature turns about the pivot and pushes the contacts together.
- Circuit 2 is completed, so current flows in the motor.
(b)Explain one reason for using a relay instead of wiring the push switch straight into circuit 2.
2 marksShow the answerHide the answer
Answer: It is safer for the operator. The switch is in a separate low-voltage circuit that carries only a small current, because the coil is not electrically connected to the contacts in the mains circuit.
Marking points
- Safer: the operator is kept away from the high-current mains circuit.
- The switch circuit is separate (not electrically connected) and carries only a small current at low voltage.
(c)The push switch is released. Describe what happens to the armature.
1 markShow the answerHide the answer
Answer: The core loses its magnetism, so the spring pulls the armature back up and the contacts separate. The motor stops.
Marking points
- The spring pulls the armature back, so the contacts open.