AQA · GCSE AQA
AQA GCSE Physics June 2023 Paper 2 Foundation (8463/2F)
Set by AQA for AQA GCSE Physics, June 2023: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- June 2023
- Paper
- Paper 2 Foundation
- Code
- 8463/2F
- Tier
- Foundation
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner report(opens AQA’s website)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Forces
Scalar and vector quantities · Contact and non-contact forces · Gravity, weight and mass · Resultant forces · Work done and energy transfer · Forces and elasticity · Moments, levers and gears · Pressure in fluids · Pressure and depth in a liquid · Upthrust and floating · Atmospheric pressure
Adding and resolving vectorsDistance and displacementFree-body diagrams and resultant forceStatic and kinetic friction
- Forces and motion
Distance and displacement · Speed and velocity · Distance–time graphs · Acceleration · Velocity–time graphs · Free fall and terminal velocity · Newton's first law · Newton's second law · Newton's third law · Stopping distance and reaction time · Momentum and conservation of momentum · Changes in momentum
Distance and displacementMotion graphsCircular motionSUVAT equations of motion
- Waves
Transverse and longitudinal waves · Properties of waves · Reflection of waves · Sound waves · Ultrasound and seismic waves
Transverse and longitudinal wavesRipple tankReflection in a plane mirrorSound waves and the oscilloscope
- Electromagnetic waves
Electromagnetic spectrum · Refraction · Infrared radiation and surfaces · Uses and hazards of EM waves · Lenses · Visible light and colour · Black body radiation
Electromagnetic spectrumRefraction and Snell's lawRipple tankConduction, convection and radiation
- Magnetism and electromagnetism
Permanent and induced magnets · Magnetic fields · Electromagnetism and solenoids · Fleming's left-hand rule · Electric motors · Loudspeakers and microphones · Induced potential (generator effect) · Alternators and dynamos · Transformers
Magnetic field of a bar magnetMagnetic field around a wire and solenoidThe motor effectElectromagnetic induction
- Space physics
Our solar system · Life cycle of a star · Orbital motion and satellites · Red-shift and the Big Bang
Life cycle of starsOrbits and gravityRed-shift and the expanding universe
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A builder uses a long steel bar as a lever to lift the edge of a heavy stone. The bar rests on a brick, which acts as the pivot. The stone pushes down on the short end of the bar with a force of 960 N, 0.15 m from the pivot. The builder pushes down on the long end, 1.20 m from the pivot. Ignore the weight of the bar.
From the topic: Moments, levers and gears Physics only
(a)Calculate the force the builder must apply at right angles to the bar to balance the force from the stone.
3 marksShow the answerHide the answer
Answer: Moment of stone = 960 × 0.15 = 144 N m; F × 1.20 = 144, so F = 120 N.
Marking points
- Moment from the stone = 960 × 0.15 = 144 N m
- F × 1.20 = 144 (clockwise moment = anticlockwise moment)
- F = 120 N
(b)Explain how the lever lets the builder lift the stone with a much smaller force than the force from the stone.
2 marksShow the answerHide the answer
Answer: The builder pushes much further from the pivot than the stone is, so a small force produces a moment as large as the stone's moment.
Marking points
- The effort acts much further from the pivot than the load.
- So a smaller force produces an equal moment (moment = force × distance).
(c)The builder now pushes on the same point but at an angle to the bar instead of at right angles. Explain why a larger force is needed.
2 marksShow the answerHide the answer
Answer: The perpendicular distance from the pivot to the line of action of the force is now less than 1.20 m, so a larger force is needed to give the same moment of 144 N m.
Marking points
- The perpendicular distance from the pivot to the line of action of the force is smaller.
- So a larger force is needed to produce the same moment.
2.GCSE Physics only. A weather balloon carries a pressure sensor from sea level up to a height of 10 km. The sensor reads about 100 kPa at sea level and about 26 kPa at 10 km.
From the topic: Atmospheric pressure Physics only
(a)Explain why the pressure reading falls as the balloon rises. In your answer, describe what the atmosphere is like and how air molecules produce atmospheric pressure.
6 marksShow the answerHide the answer
Answer: Compared with the size of the Earth, the air forms only a shallow covering. Air molecules move randomly and collide with any surface, including the sensor. Each collision exerts a small force, and the total force on each unit of area is the atmospheric pressure. The air nearest the ground is squeezed by everything on top of it, so it is densest there, and its density decreases with height. As the balloon rises there is less air, and so less weight of air, above the sensor. With fewer molecules in each cubic metre, fewer of them hit the sensor each second, so the force per unit area, and the reading, falls. (Level-of-response marking: the answer is placed in a level as a whole, then given a mark within that level. Level 3, 5–6 marks: a full, logical chain from the thin layer and molecular collisions to less air above and a lower pressure. Level 2, 3–4 marks: some correct links, for example less air above giving a lower pressure. Level 1, 1–2 marks: isolated correct points, for example that the air is thinner high up. No relevant content: 0 marks.)
Marking points
- Model: the air is a shallow covering, thin next to the radius of the Earth.
- Air molecules move randomly and collide with surfaces such as the sensor.
- Each collision exerts a force; the total force per unit area is the atmospheric pressure.
- Air is densest near the ground (squeezed by the air on top) and its density decreases with height.
- As the balloon rises there is less air above the sensor, so less weight of air.
- Fewer molecules per unit volume, so fewer collisions per second on the sensor: smaller force per unit area, so lower pressure.
3.Higher tier. A passenger is standing on a train, without holding on, as the train pulls away from a station.
From the topic: Newton's first law
(a)Give the name of the tendency of an object to stay at rest or to keep moving with a uniform velocity.
1 markShow the answerHide the answer
Answer: Inertia.
Marking points
- Inertia.
(b)Explain why the passenger tends to fall backwards as the train speeds up.
2 marksShow the answerHide the answer
Answer: The passenger's body tends to stay at rest (its inertia), while the floor and the train speed up forwards. So, compared with the train, the passenger's upper body moves backwards.
Marking points
- The passenger's body tends to remain at rest (keep its original velocity) because of inertia.
- The train accelerates forwards, so the passenger moves backwards relative to the train.
(c)An empty shopping trolley and a fully loaded one are pushed with the same resultant force. State which one has the greater inertia.
1 markShow the answerHide the answer
Answer: The loaded trolley, because it has the greater mass.
Marking points
- The loaded trolley (greater mass).
4.A wave travels along a long stretched spring. A displacement–distance graph of the spring shows 5 complete waves across 3.0 m. The crests reach +4.0 cm and the troughs reach −4.0 cm.
From the topic: Properties of waves
(a)Give the amplitude of the wave.
1 markShow the answerHide the answer
Answer: 4.0 cm (0.040 m)
Marking points
- 4.0 cm or 0.040 m (not 8.0 cm)
(b)Calculate the wavelength of the wave.
2 marksShow the answerHide the answer
Answer: λ = 3.0 ÷ 5 = 0.60 m
Marking points
- λ = 3.0 ÷ 5
- λ = 0.60 m
(c)The frequency of the wave is 2.5 Hz. Calculate the wave speed.
2 marksShow the answerHide the answer
Answer: v = f λ = 2.5 × 0.60 = 1.5 m/s
Marking points
- v = 2.5 × 0.60 (allow their wavelength)
- v = 1.5 m/s
(d)Calculate the period of the wave.
2 marksShow the answerHide the answer
Answer: T = 1 ÷ f = 1 ÷ 2.5 = 0.40 s
Marking points
- T = 1 ÷ 2.5
- T = 0.40 s
5.A narrow beam of light in air strikes one face of a rectangular glass block at an angle. It leaves through the opposite, parallel face.
From the topic: Refraction
(a)Give the name of the line drawn at 90° to the surface where the ray enters the block.
1 markShow the answerHide the answer
Answer: The normal.
Marking points
- The normal.
(b)Describe how the direction of the ray changes as it enters the glass.
1 markShow the answerHide the answer
Answer: It bends towards the normal.
Marking points
- Bends towards the normal (angle of refraction is smaller than the angle of incidence).
(c)Describe the path of the ray when it leaves the block through the opposite surface.
2 marksShow the answerHide the answer
Answer: It bends away from the normal and leaves the block travelling parallel to the original ray, shifted sideways.
Marking points
- Bends away from the normal.
- Emerging ray is parallel to the incident ray.
(d)A second ray hits the block along the normal. Describe what happens to this ray.
1 markShow the answerHide the answer
Answer: It passes into the glass without changing direction.
Marking points
- No change in direction (it goes straight through).
6.A steel ball bearing and a copper ball bearing of the same size lie on a table. A bar magnet is moved slowly towards both of them.
From the topic: Magnetic fields
(a)State which ball bearing rolls towards the magnet. Give a reason for your answer.
2 marksShow the answerHide the answer
Answer: The steel one: the magnet attracts steel, which is a magnetic material, but not copper.
Marking points
- The steel ball bearing.
- Steel is a magnetic material (copper is not), so a force of attraction acts on it.
(b)The steel ball bearing only starts to roll when the magnet is a few centimetres away. Explain why.
2 marksShow the answerHide the answer
Answer: The field weakens rapidly with distance from the magnet. Only when the magnet is close is the pull on the ball bearing big enough to start it rolling.
Marking points
- The field (and so the force) gets weaker further from the magnet.
- Only when the magnet is close is the force large enough to move the ball bearing.