AQA · GCSE AQA
AQA GCSE Physics June 2019 Paper 2 Foundation (8463/2F)
Set by AQA for AQA GCSE Physics, June 2019: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- June 2019
- Paper
- Paper 2 Foundation
- Code
- 8463/2F
- Tier
- Foundation
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner report(opens AQA’s website)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Forces
Scalar and vector quantities · Contact and non-contact forces · Gravity, weight and mass · Resultant forces · Work done and energy transfer · Forces and elasticity · Moments, levers and gears · Pressure in fluids · Pressure and depth in a liquid · Upthrust and floating · Atmospheric pressure
Adding and resolving vectorsDistance and displacementFree-body diagrams and resultant forceStatic and kinetic friction
- Forces and motion
Distance and displacement · Speed and velocity · Distance–time graphs · Acceleration · Velocity–time graphs · Free fall and terminal velocity · Newton's first law · Newton's second law · Newton's third law · Stopping distance and reaction time · Momentum and conservation of momentum · Changes in momentum
Distance and displacementMotion graphsCircular motionSUVAT equations of motion
- Waves
Transverse and longitudinal waves · Properties of waves · Reflection of waves · Sound waves · Ultrasound and seismic waves
Transverse and longitudinal wavesRipple tankReflection in a plane mirrorSound waves and the oscilloscope
- Electromagnetic waves
Electromagnetic spectrum · Refraction · Infrared radiation and surfaces · Uses and hazards of EM waves · Lenses · Visible light and colour · Black body radiation
Electromagnetic spectrumRefraction and Snell's lawRipple tankConduction, convection and radiation
- Magnetism and electromagnetism
Permanent and induced magnets · Magnetic fields · Electromagnetism and solenoids · Fleming's left-hand rule · Electric motors · Loudspeakers and microphones · Induced potential (generator effect) · Alternators and dynamos · Transformers
Magnetic field of a bar magnetMagnetic field around a wire and solenoidThe motor effectElectromagnetic induction
- Space physics
Our solar system · Life cycle of a star · Orbital motion and satellites · Red-shift and the Big Bang
Life cycle of starsOrbits and gravityRed-shift and the expanding universe
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
8 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A student connects a resistor into a circuit. The ammeter reads 65 mA and the voltmeter across the resistor reads 4.8 V.
From the topic: Units, prefixes and significant figures
(a)Write 65 mA in amperes.
1 markShow the answerHide the answer
Answer: 0.065 A
Marking points
- 0.065 A
(b)Give the equation that connects V, I and R for the resistor.
1 markShow the answerHide the answer
Answer: V = I R, where V is potential difference, I is current and R is resistance
Marking points
- V = I R
(c)Calculate the resistance R. Give your answer to 2 significant figures.
3 marksShow the answerHide the answer
Answer: 4.8 = 0.065 × R, so R = 4.8 ÷ 0.065 = 73.8… Ω = 74 Ω to 2 significant figures
Marking points
- 4.8 = 0.065 × R (current in amperes)
- R = 73.8… Ω
- R = 74 Ω
(d)Explain why the resistance should not be given to more than 2 significant figures.
1 markShow the answerHide the answer
Answer: Both meter readings have only 2 significant figures, so the answer cannot be more precise than the data.
Marking points
- The readings (65 mA and 4.8 V) have only 2 significant figures, and the answer cannot be more precise than the data
2.A motor boat moves along a straight canal. The engine gives a forward force of 900 N. The water and air together exert a backward resistive force of 650 N.
From the topic: Resultant forces
(a)Explain what is meant by the resultant force on an object.
1 markShow the answerHide the answer
Answer: One force that would have the same effect on the object as all the forces acting on it combined.
Marking points
- One force that replaces all the forces and has the same effect as them combined.
(b)Calculate the resultant force on the boat and give its direction.
2 marksShow the answerHide the answer
Answer: 900 − 650 = 250 N, forwards.
Marking points
- 250 N
- Forwards (in the direction of the engine force).
(c)Later, the resistive force has increased to 900 N while the engine force is unchanged. State the resultant force now.
1 markShow the answerHide the answer
Answer: Zero: the forces are balanced.
Marking points
- Zero (0 N), the forces are balanced.
3.GCSE Physics only. The radius of the Earth is about 6400 km. Almost all of the air in the atmosphere lies within 30 km of the ground.
From the topic: Atmospheric pressure Physics only
(a)Calculate the depth of this layer of air as a percentage of the Earth's radius.
2 marksShow the answerHide the answer
Answer: (30 ÷ 6400) × 100 = 0.47%
Marking points
- (30 ÷ 6400) × 100
- 0.47% (accept 0.5%)
(b)Use your answer to explain why the atmosphere is modelled as a thin layer.
1 markShow the answerHide the answer
Answer: The air is less than 1% as deep as the Earth's radius, so next to the Earth it is a very shallow covering.
Marking points
- Its depth is tiny (under 1%) compared with the size of the Earth.
(c)Describe how the density of the air changes as the height above the ground increases. Give a reason for this change.
2 marksShow the answerHide the answer
Answer: The density decreases with height. The lowest air is squeezed by the air resting on top of it, so it has more molecules in each cubic metre.
Marking points
- Density decreases as height increases.
- Air lower down is squeezed by the air resting on it (so it has more molecules per cubic metre).
(d)A bag of crisps, sealed in a factory near sea level, is taken up a high mountain. The bag swells up. Explain why.
3 marksShow the answerHide the answer
Answer: Atmospheric pressure falls as the bag is carried higher. The gas inside the bag stays at its sea-level pressure at first, so it pushes outwards harder than the air outside pushes inwards. The gas expands and stretches the bag until the pressures balance or the bag is tight.
Marking points
- Atmospheric pressure outside the bag decreases with height.
- The gas inside is at a higher pressure than the air outside (it pushes out harder than the air pushes in).
- So the gas expands and the bag swells (until the pressures are equal or the bag is taut).
4.A sprinter accelerates from rest to 9.0 m/s in the first 1.8 s of a race.
From the topic: Acceleration
(a)Calculate the average acceleration of the sprinter.
2 marksShow the answerHide the answer
Answer: a = 9.0 ÷ 1.8 = 5.0 m/s²
Marking points
- a = 9.0 ÷ 1.8
- a = 5.0 m/s²
(b)Compare the sprinter's acceleration with the acceleration of an object in free fall.
1 markShow the answerHide the answer
Answer: It is about half of the free-fall acceleration of 9.8 m/s².
Marking points
- Smaller than / about half of 9.8 m/s².
5.Higher tier. A delivery van of mass 2500 kg is travelling at 16 m/s. The driver brakes, and the van comes to rest over a braking distance of 32 m.
From the topic: Stopping distance and reaction time
(a)Calculate the kinetic energy of the van before it brakes.
2 marksShow the answerHide the answer
Answer: E_k = ½ × 2500 × 16² = 320 000 J
Marking points
- E_k = ½ × 2500 × 16²
- E_k = 320 000 J
(b)Calculate the average braking force on the van.
3 marksShow the answerHide the answer
Answer: The brakes must do 320 000 J of work, removing all the kinetic energy. F = W ÷ s = 320 000 ÷ 32 = 10 000 N
Marking points
- Work done by the brakes = 320 000 J (equal to the kinetic energy lost)
- F = 320 000 ÷ 32
- F = 10 000 N
(c)Explain what happens to the temperature of the brakes as the van stops.
2 marksShow the answerHide the answer
Answer: The temperature increases, because the friction force between the brakes and the wheels does work, transferring energy from the kinetic energy store of the van to the thermal energy store of the brakes.
Marking points
- The temperature of the brakes increases.
- Work done by friction transfers energy from the van's kinetic energy store to the thermal energy store of the brakes.
6.A band rehearses in a school hall. One wall is bare brick. The opposite wall is covered with thick fabric panels.
From the topic: Reflection of waves Physics only
(a)Name three things that can happen to the sound when it reaches a wall.
3 marksShow the answerHide the answer
Answer: It can be reflected, absorbed or transmitted.
Marking points
- Reflected.
- Absorbed.
- Transmitted.
(b)The fabric panels reduce the echoes in the hall. Explain why.
2 marksShow the answerHide the answer
Answer: The fabric absorbs more of the sound than brick does, so less sound is reflected back into the hall and the echoes are weaker.
Marking points
- Fabric absorbs (more of) the sound.
- So less sound is reflected, giving fewer or weaker echoes.
(c)People in the next room can hear the band. Name the process that lets the sound pass into the next room.
1 markShow the answerHide the answer
Answer: Transmission.
Marking points
- Transmission (the sound is transmitted through the wall).
(d)Describe what happens to the energy of the sound absorbed by the fabric.
1 markShow the answerHide the answer
Answer: It ends up in the fabric's thermal energy store, so the fabric warms up very slightly.
Marking points
- Transferred to the fabric's thermal (internal) energy store, so it warms slightly.
7.This question is about how objects emit and absorb radiation.
From the topic: Black body radiation Physics only
(a)Describe what is meant by a perfect black body.
2 marksShow the answerHide the answer
Answer: An ideal object that takes in all radiation arriving at its surface, whatever the wavelength. None of the radiation is reflected and none is transmitted.
Marking points
- Absorbs all of the radiation reaching it.
- Reflects none and transmits none of it.
(b)Explain why a perfect black body emits radiation better than any other object at the same temperature.
2 marksShow the answerHide the answer
Answer: A good absorber of radiation is also a good emitter. A perfect black body absorbs all radiation, so it is the best absorber, which makes it the best emitter too.
Marking points
- Good absorbers are also good emitters.
- It is the best possible absorber (absorbs all radiation), so it must be the best emitter.
(c)A block of ice at −5 °C sits in a freezer. A student says: 'The ice gives out no infrared because it is so cold.' Explain why the student is wrong.
2 marksShow the answerHide the answer
Answer: All objects emit infrared, whatever their temperature, so the ice does emit some. It emits less each second than it would if it were warmer.
Marking points
- All objects emit infrared at any temperature, so the ice does emit.
- It just emits less (per second) than a hotter object would.
8.A student wants to map the field around a bar magnet. The student has a bar magnet, a small plotting compass, a sheet of plain paper and a pencil.
From the topic: Magnetic fields
(a)Describe how the student could use the compass to map the field lines around the bar magnet.
6 marksShow the answerHide the answer
Answer: Place the magnet in the centre of the paper and draw round it, labelling the N and S ends. Put the compass next to the N pole and mark a dot where the N end of the needle points. Slide the compass along until that dot is hidden under the S end of the needle, then dot the paper at the needle's N end again. Repeat until the compass arrives at the S pole or the paper's edge. Connect the dots in one smooth line, arrowed in the N-to-S direction. Repeat from other starting points around the N pole to draw several lines on both sides of the magnet. (Marked by level of response: the examiner reads the answer as a whole and places it in a level. A clear, logically ordered method like this one reaches the top level.)
Marking points
- Magnet placed on the paper and its outline drawn, with the poles labelled.
- Compass placed by the N pole; a dot made at the needle's N end.
- Compass shifted until the needle's S end lies on the last dot; a new dot marked at its N end.
- Repeated until the compass arrives at the S pole (or the paper's edge).
- Dots joined in a smooth curve, arrowed from N to S.
- Repeated from different starting points to give several field lines around the magnet.
(b)Give one reason why the student should do the experiment away from any steel objects.
1 markShow the answerHide the answer
Answer: Steel objects would affect the direction the compass needle points, so the plotted lines would not show only the bar magnet's field.
Marking points
- Steel would pull on / change the direction of the compass needle (so the pattern would be wrong).