Skip to content

AQA · GCSE AQA

AQA GCSE Physics November 2020 Paper 2 Foundation (8463/2F)

Set by AQA for AQA GCSE Physics, November 2020: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
November 2020
Paper
Paper 2 Foundation
Code
8463/2F
Tier
Foundation
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
  5. 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

8 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A student opens a heavy fire door by pushing on it at right angles to its surface. The hinges of the door act as a pivot.

    From the topic: Moments, levers and gears Physics only

    1. (a)State what is meant by the moment of a force.

      1 mark
      Show the answer

      Answer: The turning effect of the force (about a pivot).

      Marking points

      • The turning effect of a force about a pivot.
    2. (b)The student pushes with a force of 25 N, 0.80 m from the hinges. Calculate the moment of this force about the hinges. Give the unit.

      3 marks
      Show the answer

      Answer: M = 25 × 0.80 = 20 N m

      Marking points

      • M = 25 × 0.80
      • 20
      • N m (newton-metres)
    3. (c)A second student pushes the door at right angles, but only 0.40 m from the hinges. Explain why this student must push harder to produce the same moment.

      2 marks
      Show the answer

      Answer: The perpendicular distance from the pivot is smaller (half as much), so the force must be bigger (twice as big, 50 N) to give the same moment.

      Marking points

      • The perpendicular distance from the pivot (hinges) is smaller.
      • Moment = force × distance, so a larger force (50 N) is needed for a moment of 20 N m.
  2. 2.When a pressure cooker is working, the steam inside is at a pressure 100 kPa greater than the air outside. The lid has an area of 0.050 m². A small valve in the lid has an area of 0.10 cm².

    From the topic: Pressure in fluids Physics only

    1. (a)Calculate the resultant force on the lid caused by this difference in pressure.

      2 marks
      Show the answer

      Answer: F = pA = 100 000 Pa × 0.050 m² = 5000 N

      Marking points

      • F = 100 000 × 0.050 (100 kPa written as 100 000 Pa)
      • 5000 N
    2. (b)Convert the area of the valve into m².

      1 mark
      Show the answer

      Answer: 0.10 ÷ 10 000 = 1.0 × 10⁻⁵ m²

      Marking points

      • 1.0 × 10⁻⁵ m² (0.000010 m²)
    3. (c)Calculate the resultant force on the valve.

      2 marks
      Show the answer

      Answer: F = 100 000 Pa × 1.0 × 10⁻⁵ m² = 1.0 N

      Marking points

      • F = 100 000 × 1.0 × 10⁻⁵ (allow their area)
      • 1.0 N
    4. (d)A small weight is enough to hold the valve shut, but the lid needs strong clips. Explain why.

      2 marks
      Show the answer

      Answer: The same pressure difference acts on both, but the lid's area is 5000 times the valve's. Force = pressure × area, so the force on the lid is 5000 N compared with only 1.0 N on the valve.

      Marking points

      • The same pressure acts on a much larger area (5000 times as large).
      • So the force on the lid is far bigger (5000 N against 1.0 N), from F = pA.
  3. 3.Higher tier. A car pulls away from traffic lights. Its distance–time graph is a curve that gets steeper. A tangent is drawn at 5.0 s. It passes through (1.0 s, 0 m) and (7.0 s, 60 m).

    From the topic: Distance–time graphs

    1. (a)Explain how the graph shows that the car is accelerating.

      2 marks
      Show the answer

      Answer: The curve gets steeper, so the gradient increases. A distance–time gradient tells you the speed, so the speed is increasing.

      Marking points

      • The gradient (steepness) increases.
      • Gradient represents speed, so the speed is increasing.
    2. (b)Determine the speed of the car at 5.0 s.

      2 marks
      Show the answer

      Answer: Gradient of tangent = (60 − 0) ÷ (7.0 − 1.0) = 60 ÷ 6.0 = 10 m/s

      Marking points

      • Gradient = 60 ÷ 6.0
      • 10 m/s
  4. 4.Higher tier. A delivery van of mass 2500 kg is travelling at 16 m/s. The driver brakes, and the van comes to rest over a braking distance of 32 m.

    From the topic: Stopping distance and reaction time

    1. (a)Calculate the kinetic energy of the van before it brakes.

      2 marks
      Show the answer

      Answer: E_k = ½ × 2500 × 16² = 320 000 J

      Marking points

      • E_k = ½ × 2500 × 16²
      • E_k = 320 000 J
    2. (b)Calculate the average braking force on the van.

      3 marks
      Show the answer

      Answer: The brakes must do 320 000 J of work, removing all the kinetic energy. F = W ÷ s = 320 000 ÷ 32 = 10 000 N

      Marking points

      • Work done by the brakes = 320 000 J (equal to the kinetic energy lost)
      • F = 320 000 ÷ 32
      • F = 10 000 N
    3. (c)Explain what happens to the temperature of the brakes as the van stops.

      2 marks
      Show the answer

      Answer: The temperature increases, because the friction force between the brakes and the wheels does work, transferring energy from the kinetic energy store of the van to the thermal energy store of the brakes.

      Marking points

      • The temperature of the brakes increases.
      • Work done by friction transfers energy from the van's kinetic energy store to the thermal energy store of the brakes.
  5. 5.Ultraviolet, infrared and visible light all have uses in everyday life.

    From the topic: Uses and hazards of EM waves

    1. (a)Give one use of ultraviolet.

      1 mark
      Show the answer

      Answer: Energy-efficient (fluorescent) lamps, or sunbeds for tanning.

      Marking points

      • Low-energy / fluorescent lamps, or sun tanning / sunbeds.
    2. (b)Describe two harmful effects that too much ultraviolet can have on the skin.

      2 marks
      Show the answer

      Answer: Skin exposed to too much ultraviolet ages early, and its chance of developing skin cancer goes up.

      Marking points

      • The skin ages early (prematurely).
      • A higher chance of skin cancer.
    3. (c)Higher tier. Explain why an infrared camera can show a person standing in a completely dark room.

      2 marks
      Show the answer

      Answer: The person is warmer than the room, so their body gives out more infrared than the surroundings. The camera detects infrared rather than visible light, so it shows the person without any light being needed.

      Marking points

      • The warm body emits more infrared than the cooler surroundings.
      • The camera detects infrared, not visible light, so no light is needed.
    4. (d)Higher tier. Visible light is used for fibre optic communications. Suggest why.

      1 mark
      Show the answer

      Answer: Glass is transparent to visible light, so little of it is absorbed as it travels along the fibre, reflecting off the inside walls.

      Marking points

      • Little is absorbed by the glass / it travels along the fibre by repeated reflection.
  6. 6.This question is about how objects emit and absorb radiation.

    From the topic: Black body radiation Physics only

    1. (a)Describe what is meant by a perfect black body.

      2 marks
      Show the answer

      Answer: An ideal object that takes in all radiation arriving at its surface, whatever the wavelength. None of the radiation is reflected and none is transmitted.

      Marking points

      • Absorbs all of the radiation reaching it.
      • Reflects none and transmits none of it.
    2. (b)Explain why a perfect black body emits radiation better than any other object at the same temperature.

      2 marks
      Show the answer

      Answer: A good absorber of radiation is also a good emitter. A perfect black body absorbs all radiation, so it is the best absorber, which makes it the best emitter too.

      Marking points

      • Good absorbers are also good emitters.
      • It is the best possible absorber (absorbs all radiation), so it must be the best emitter.
    3. (c)A block of ice at −5 °C sits in a freezer. A student says: 'The ice gives out no infrared because it is so cold.' Explain why the student is wrong.

      2 marks
      Show the answer

      Answer: All objects emit infrared, whatever their temperature, so the ice does emit some. It emits less each second than it would if it were warmer.

      Marking points

      • All objects emit infrared at any temperature, so the ice does emit.
      • It just emits less (per second) than a hotter object would.
  7. 7.At a recycling centre, crushed cans travel along a conveyor belt and pass under a strong permanent magnet. Some cans are made of steel and some are made of aluminium.

    From the topic: Permanent and induced magnets

    1. (a)Explain how the magnet separates the two kinds of can.

      2 marks
      Show the answer

      Answer: Steel is a magnetic material, so the steel cans are attracted and lifted out by the magnet. Aluminium is not magnetic, so the aluminium cans stay on the belt.

      Marking points

      • Steel is a magnetic material, so steel cans are attracted to the magnet.
      • Aluminium is not magnetic, so aluminium cans are not attracted and stay on the belt.
    2. (b)Apart from iron and steel, name two magnetic materials.

      2 marks
      Show the answer

      Answer: Nickel and cobalt.

      Marking points

      • Nickel
      • Cobalt
    3. (c)The steel cans are not permanent magnets. Compare the force the magnet exerts on a steel can with the forces between two permanent magnets.

      1 mark
      Show the answer

      Answer: The magnet always attracts a steel can, whereas two permanent magnets may either attract or repel, according to the poles that face.

      Marking points

      • The magnet always attracts a steel can, but two permanent magnets can repel as well as attract.
  8. 8.A star the same size as the Sun began as a cloud of dust and gas. It is now a main sequence star.

    From the topic: Life cycle of a star Physics only

    1. (a)Give the name for a cloud of dust and gas in space.

      1 mark
      Show the answer

      Answer: A nebula.

      Marking points

      • nebula
    2. (b)Name the force that pulled the dust and gas together.

      1 mark
      Show the answer

      Answer: Gravity (gravitational attraction).

      Marking points

      • gravity / gravitational attraction
    3. (c)Before it becomes a black dwarf, the star will pass through two more stages. Name these two stages in the correct order.

      2 marks
      Show the answer

      Answer: First a red giant, then a white dwarf.

      Marking points

      • red giant
      • white dwarf, named after the red giant
    4. (d)Explain why this star will never become a black hole.

      2 marks
      Show the answer

      Answer: It does not have enough mass. Black holes come only from stars far heavier than the Sun, whose cores collapse at the end of their lives; a star the size of the Sun ends as a white dwarf.

      Marking points

      • its mass is too small / it is not massive enough
      • only stars much more massive than the Sun become supernovae, which can leave a black hole