Skip to content

An original Labverse practice paper — not an official exam paper

GCSE Physics — AQA

AQA GCSE Physics Paper 2 practice paper B

Written by Labverse from our own exam-style questions, to the same time and total marks as AQA’s Paper 2 (8463/2F, 8463/2H), on the same topics. It is not set, checked or endorsed by AQA.

Time allowed
1 hour 45 minutes
Total marks
100
Questions
17
Level
All tiers

Instructions

  • Answer every question. Work in one sitting and stop when the time is up.
  • The marks for each part are shown beside it. Use them to judge how much to write.
  • Show your working for calculations and give the unit with every answer.
  • Questions marked Higher tier are for Higher-tier students only; on Foundation, skip them.

To print the answers too, open the mark scheme at the end first.

Marks by topic

  • Working scientifically · 7 marks
  • Forces · 24 marks
  • Forces and motion · 23 marks
  • Waves · 13 marks
  • Electromagnetic waves · 10 marks
  • Magnetism and electromagnetism · 18 marks
  • Space physics · 5 marks

Questions

  1. Question 1 (7 marks)Measuring instruments

    A student wants to find the density of a small steel ball bearing. Its diameter is roughly 6 mm. The student can use a 30 cm ruler marked in millimetres, a set of Vernier callipers or a micrometer.

    1. (a)Give the resolution of the ruler.

      [1]
    2. (b)Which instrument should the student use to measure the diameter of the ball bearing? Give a reason for your answer.

      [2]
    3. (c)The student measures the diameter five times. The readings are 6.32 mm, 6.35 mm, 6.33 mm, 6.36 mm and 6.34 mm. Calculate the mean diameter.

      [2]
    4. (d)Use the readings to estimate the uncertainty in the mean diameter.

      [2]
  2. Question 2 (8 marks)Gravity, weight and mass

    A robotic rover is built on Earth and then sent to Mars. Its mass is 900 kg. Gravitational field strength on Earth = 9.8 N/kg. Gravitational field strength on Mars = 3.7 N/kg.

    1. (a)Write down the equation linking weight (W), gravitational field strength (g) and mass (m).

      [1]
    2. (b)Calculate the weight of the rover on Earth.

      [2]
    3. (c)Calculate how much less the rover weighs on Mars than on Earth.

      [3]
    4. (d)State the mass of the rover on Mars. Give a reason for your answer.

      [2]
  3. Question 3 (7 marks)Gravity, weight and mass

    A builder carries a uniform wooden plank. The plank is 3.0 m long and has a mass of 15 kg.

    1. (a)State what is meant by the centre of mass of an object.

      [1]
    2. (b)State where the centre of mass of this plank is. Give a reason for your answer.

      [2]
    3. (c)Calculate the weight of the plank. Gravitational field strength = 9.8 N/kg.

      [2]
    4. (d)The builder says, 'This plank weighs 15 kg.' Explain why this is not correct in physics.

      [2]
  4. Question 4 (8 marks)Moments, levers and gearsPhysics only

    A uniform metre rule is balanced on a pivot at its 50 cm mark, with its 0 cm end on the left. A 4.0 N weight hangs from the 10 cm mark and a 2.0 N weight hangs from the 30 cm mark. A third weight, W, hangs from the 75 cm mark so that the rule stays balanced.

    1. (a)Calculate the sum of the anticlockwise moments about the pivot.

      [3]
    2. (b)Use the principle of moments to calculate the weight W.

      [3]
    3. (c)Explain why the weight of the metre rule was not included in your calculations.

      [2]
  5. Question 5 (1 mark)Upthrust and floatingHigher tierPhysics only

    Higher tier, physics only. A student hangs a stone from a newtonmeter. The newtonmeter reads 3.6 N with the stone in air, and 2.2 N with the stone completely under water.

    1. (a)Calculate the upthrust on the stone in the water.

      [1]
  6. A skydiver jumps from a hovering helicopter. The skydiver falls for some time before opening a parachute.

    1. (a)Name the force that acts upwards on the skydiver as they fall.

      [1]
    2. (b)Physics only. Explain why the velocity of the skydiver increases at first and then becomes constant before the parachute opens.

      [4]
  7. Physics only. The skydiver in this question is falling at terminal velocity and then opens the parachute. Later the skydiver lands.

    1. (a)Explain how and why the skydiver's velocity changes after the parachute opens, up to just before landing.

      [4]
    2. (b)Describe the shape of the velocity–time graph for the part of the fall after the parachute opens.

      [2]
  8. Question 8 (5 marks)Newton's second law

    A delivery van has a mass of 2400 kg. When it pulls away, the resultant force on it is 3000 N.

    1. (a)Write down the equation that links resultant force (F), mass (m) and acceleration (a).

      [1]
    2. (b)Calculate the acceleration of the van.

      [2]
    3. (c)Parcels are loaded into the van, so its mass becomes 3000 kg. The resultant force is still 3000 N. Calculate the new acceleration and explain why it is different.

      [2]
  9. Two students use a 30 cm ruler to measure their reaction times.

    1. (a)Describe a method the students could use.

      [4]
    2. (b)One student repeats the test while having a conversation on a phone. The mean distance fallen increases from 16 cm to 24 cm. What does this result show?

      [1]
    3. (c)Suggest why a driver's reaction time on a real road is usually longer than the results of this test.

      [2]
  10. A slinky spring is stretched out along a laboratory bench. By moving one end in different ways, a student can send two different kinds of wave along it.

    1. (a)Describe how the student should move the end of the slinky to make a longitudinal wave.

      [2]
    2. (b)Compare transverse waves and longitudinal waves on the slinky.

      [4]
  11. Question 11 (7 marks)Sound wavesHigher tierPhysics only

    Higher tier, physics only. A student whistles a steady note into a microphone connected to an oscilloscope. On the screen, one complete wave covers 5.0 horizontal divisions, and each horizontal division stands for 0.10 ms.

    1. (a)Calculate the period of the sound wave in seconds.

      [2]
    2. (b)Calculate the frequency of the whistle. The equation you need is on the Physics equation sheet.

      [2]
    3. (c)A friend says the trace shows that the air particles move up and down as the sound passes. Explain why the friend is wrong.

      [2]
    4. (d)Could a person with normal hearing hear this whistle? Give a reason for your answer.

      [1]
  12. Question 12 (4 marks)Electromagnetic spectrum

    A student writes: “Gamma rays move faster than radio waves, because gamma rays have the higher frequency.”

    1. (a)Explain why the student is wrong.

      [2]
    2. (b)Wave P has a wavelength of 6.0 × 10⁻⁷ m. Wave Q has a wavelength of 6.0 × 10⁻¹⁰ m. Both travel in a vacuum. How many times higher is the frequency of Q than the frequency of P?

      [2]
  13. Question 13 (6 marks)LensesPhysics only

    Convex and concave lenses both refract light, but the images they form are different.

    1. (a)Describe the similarities and differences between the images formed by convex and concave lenses. You may refer to ray diagrams in your answer.

      [6]
  14. Question 14 (6 marks)Fleming's left-hand ruleHigher tier

    Fleming's left-hand rule shows how three quantities are arranged when a current-carrying wire is in a magnetic field.

    1. (a)State what the first finger and the second finger each represent.

      [2]
    2. (b)Describe how the directions of the force, the field and the current are arranged.

      [1]
    3. (c)Name three quantities that determine how big the force on the wire is.

      [3]
  15. Question 15 (6 marks)Induced potential (generator effect)Higher tierPhysics only

    The student now connects the coil to a resistor, so that the circuit is complete. It feels harder to push the N pole of the magnet into the coil than it did when the coil was not connected to anything.

    1. (a)Explain why it is harder to push the magnet in when the circuit is complete.

      [4]
    2. (b)Explain why there is no push back from the coil when it is not connected to anything.

      [2]
  16. Question 16 (6 marks)Induced potential (generator effect)Higher tierPhysics only

    A torch has no battery. Inside the torch is a fixed coil of wire. When the torch is shaken, a strong magnet slides back and forth through the coil. The coil is part of a circuit that stores energy to light the torch.

    1. (a)Explain how shaking the torch produces a current in the coil, and describe how the design of the torch could be changed to produce a bigger current.

      [6]
  17. Question 17 (5 marks)Red-shift and the Big BangPhysics only

    The Big Bang theory is the accepted model of how the universe began.

    1. (a)Describe what the universe was like at its beginning, according to the Big Bang theory.

      [2]
    2. (b)A student says, "Nearly every galaxy is moving away from us, so the Milky Way must be at the centre of the universe." Explain why the student is wrong.

      [2]
    3. (c)Give one reason why scientists say red-shift supports the Big Bang theory rather than proves it.

      [1]

End of practice paper · 100 marks in total

Mark schemeOpen it only after you have finished the paper.Show
  1. Question 1 (7 marks)

    1. (a)1 mm [1]

      • 1 mm (accept 0.1 cm)
    2. (b)The micrometer, because it has the smallest resolution (0.01 mm), which is very small compared with a 6 mm diameter. [2]

      • Micrometer (allow Vernier callipers).
      • Its resolution is small compared with the 6 mm diameter (micrometer 0.01 mm, the smallest; callipers 0.1 mm), whereas the ruler's 1 mm is a large fraction of 6 mm.
    3. (c)mean = (6.32 + 6.35 + 6.33 + 6.36 + 6.34) ÷ 5 = 31.70 ÷ 5 = 6.34 mm [2]

      • Sum of the readings ÷ 5 (31.70 ÷ 5)
      • 6.34 mm
    4. (d)Range = 6.36 − 6.32 = 0.04 mm. Uncertainty = half the range = ± 0.02 mm. [2]

      • Range = 6.36 − 6.32 = 0.04 mm
      • Uncertainty = ± 0.02 mm (half the range)

    Revise: Measuring instruments · Vernier caliper simulation

  2. Question 2 (8 marks)

    1. (a)W = m g [1]

      • W = m g (accept weight = mass × gravitational field strength)
    2. (b)W = 900 × 9.8 = 8820 N [2]

      • W = 900 × 9.8
      • W = 8820 N
    3. (c)Weight on Mars = 900 × 3.7 = 3330 N. Difference = 8820 − 3330 = 5490 N. (Or 900 × (9.8 − 3.7) = 900 × 6.1 = 5490 N.) [3]

      • Weight on Mars = 900 × 3.7
      • Weight on Mars = 3330 N
      • Difference = 8820 − 3330 = 5490 N (allow their Earth weight from the part above)
    4. (d)900 kg. The rover is made of exactly the same matter on Mars, so its mass is unchanged even though g is different. [2]

      • 900 kg
      • The amount of matter in the rover is unchanged (mass is independent of g).

    Revise: Gravity, weight and mass · Weight, mass and gravity simulation

  3. Question 3 (7 marks)

    1. (a)The point where the whole weight of the object can be treated as acting. [1]

      • The point at which all of the object's weight can be taken to act.
    2. (b)Halfway along the plank, 1.5 m from each end, because the plank is uniform. [2]

      • At the middle of the plank (1.5 m from either end).
      • Because the plank is uniform (its mass is spread evenly along it).
    3. (c)W = 15 × 9.8 = 147 N [2]

      • W = 15 × 9.8
      • W = 147 N (accept 150 N)
    4. (d)15 kg is the mass of the plank, not its weight. A weight is a force and is measured in newtons; the plank's weight is 147 N. [2]

      • 15 kg is the plank's mass (the amount of matter in it), not its weight.
      • Weight is a force, measured in newtons (N); here it is 147 N.

    Revise: Gravity, weight and mass · Weight, mass and gravity simulation

  4. Question 4 (8 marks)

    1. (a)4.0 × 0.40 = 1.6 N m; 2.0 × 0.20 = 0.40 N m; total = 2.0 N m [3]

      • Distances from the pivot of 0.40 m and 0.20 m used.
      • Moments of 1.6 N m and 0.40 N m.
      • Total anticlockwise moment = 2.0 N m
    2. (b)Clockwise moment = anticlockwise moment, so W × 0.25 = 2.0 and W = 8.0 N. [3]

      • W × 0.25 = 2.0 (total clockwise moment = total anticlockwise moment).
      • W = 2.0 ÷ 0.25
      • W = 8.0 N
    3. (c)The rule is uniform, so its weight acts at its centre of mass, the 50 cm mark. That is at the pivot, so the perpendicular distance is zero and the weight has no moment. [2]

      • The weight of the rule acts at its centre of mass (the 50 cm mark), which is at the pivot.
      • So its perpendicular distance from the pivot is zero and its moment is zero.

    Revise: Moments, levers and gears · Principle of moments simulation

  5. Question 5 (1 mark)

    1. (a)Upthrust = 3.6 − 2.2 = 1.4 N [1]

      • 1.4 N

    Revise: Upthrust and floating · Upthrust and floating simulation

  6. Question 6 (5 marks)

    1. (a)Air resistance (drag). [1]

      • Air resistance (accept drag).
    2. (b)At first the weight is bigger than the air resistance, so the resultant force is downwards and the skydiver accelerates. As the speed increases, the air resistance increases, so the resultant force (and the acceleration) decreases. Eventually the air resistance equals the weight, so the resultant force is zero and the velocity is constant: terminal velocity. [4]

      • Weight is greater than air resistance at first, so there is a downward resultant force and the skydiver accelerates.
      • Air resistance increases as the speed increases.
      • The resultant force decreases, so the acceleration decreases.
      • Air resistance becomes equal to the weight, so the resultant force is zero and the velocity stays constant (terminal velocity).

    Revise: Free fall and terminal velocity · Free fall and air resistance simulation

  7. Question 7 (6 marks)

    1. (a)Opening the parachute increases the area, so air resistance increases and becomes greater than the weight. With an upward resultant force, the skydiver decelerates. Slowing down reduces the air resistance, until it is back to the same size as the weight. Now the resultant force is zero, and the skydiver falls at a new, lower terminal velocity. [4]

      • The area is larger, so air resistance increases and becomes greater than the weight.
      • Upward resultant force, so the skydiver decelerates (slows down while still moving down).
      • Lower speed means less air resistance, until air resistance and weight are equal again.
      • Zero resultant force, so a new, lower terminal velocity.
    2. (b)The line falls steeply at first, then curves and becomes less steep until it is horizontal at a lower velocity. [2]

      • Velocity decreases steeply at first.
      • The line then levels off (horizontal) at a lower velocity.

    Revise: Free fall and terminal velocity · Free fall and air resistance simulation

  8. Question 8 (5 marks)

    1. (a)F = m a [1]

      • F = m a (resultant force = mass × acceleration)
    2. (b)a = 3000 ÷ 2400 = 1.25 m/s² (1.3 m/s² to 2 s.f.) [2]

      • a = 3000 ÷ 2400
      • a = 1.25 m/s² (accept 1.3 m/s²)
    3. (c)a = 3000 ÷ 3000 = 1.0 m/s². It is smaller because, for a fixed resultant force, acceleration is inversely proportional to mass. [2]

      • a = 1.0 m/s²
      • A greater mass with the same resultant force gives a smaller acceleration (a is inversely proportional to m).

    Revise: Newton's second law · Force, mass and acceleration (F = ma) simulation

  9. Question 9 (7 marks)

    1. (a)One student holds the ruler vertically with the zero mark level with the other student's open finger and thumb. The ruler is dropped without warning and caught as quickly as possible. The distance the ruler fell is read off and converted to a reaction time using a table. The test is repeated several times and a mean is calculated. [4]

      • Ruler held vertically, with the zero mark level with the catcher's finger and thumb.
      • Ruler dropped without warning and caught as soon as possible.
      • Read the distance fallen and convert it to a time (using a conversion table).
      • Repeat several times and calculate a mean.
    2. (b)Being distracted increases the student's reaction time. [1]

      • Distraction increases reaction time.
    3. (c)In the test the student is expecting the ruler to fall and is concentrating on it. A driver does not know when a hazard will appear, so first has to notice it, and then has to move a foot to the brake pedal. [2]

      • The student is ready and expecting the drop (a driver is not expecting the hazard).
      • A driver has to notice the hazard and move a foot to the brake pedal.

    Revise: Stopping distance and reaction time · Stopping distance simulation

  10. Question 10 (6 marks)

    1. (a)Push the end forwards and pull it back, over and over, along the length of the slinky, so the movement is parallel to the slinky. [2]

      • Move the end backwards and forwards (push and pull) repeatedly.
      • Along the length of the slinky (parallel to the direction the wave will travel).
    2. (b)In both, energy is transferred along the slinky while each coil oscillates about a fixed position without travelling along it. In a transverse wave the coils oscillate at right angles to the direction of energy transfer, forming crests and troughs. In a longitudinal wave the coils oscillate parallel to the direction of energy transfer, forming compressions and rarefactions. [4]

      • Both transfer energy along the slinky without the coils travelling along it.
      • Transverse: the coils oscillate perpendicular to the direction of energy transfer.
      • Longitudinal: the coils oscillate parallel to the direction of energy transfer.
      • Transverse waves have crests and troughs; longitudinal waves have compressions and rarefactions.

    Revise: Transverse and longitudinal waves · Transverse and longitudinal waves simulation

  11. Question 11 (7 marks)

    1. (a)T = 5.0 × 0.10 ms = 0.50 ms = 0.00050 s (5.0 × 10⁻⁴ s) [2]

      • T = 5.0 × 0.10 = 0.50 ms
      • T = 0.00050 s (5.0 × 10⁻⁴ s)
    2. (b)f = 1 ÷ T = 1 ÷ 0.00050 = 2000 Hz [2]

      • f = 1 ÷ 0.00050
      • f = 2000 Hz (2.0 kHz)
    3. (c)The trace is a graph of the microphone's p.d. (and so the pressure) plotted against time; it is not a picture of the wave. Sound is longitudinal: the air particles vibrate parallel to the direction the sound travels. [2]

      • The trace is a graph of p.d. (or pressure) against time, so it is not a picture of the wave. (Allow: the horizontal axis is time, not distance.)
      • Sound is longitudinal: the particles vibrate parallel to the direction of travel (energy transfer).
    4. (d)Yes. 2000 Hz lies inside the range of normal hearing, 20 Hz to 20 kHz. [1]

      • Yes, because 2000 Hz is between 20 Hz and 20 kHz (allow their value from the previous part).

    Revise: Sound waves · Sound waves and the oscilloscope simulation

  12. Question 12 (4 marks)

    1. (a)Every electromagnetic wave has one and the same speed through a vacuum or air. A higher frequency goes with a shorter wavelength, because v = fλ and v does not change. [2]

      • All electromagnetic waves have the same speed in a vacuum / air.
      • A higher frequency means a shorter wavelength (v = fλ with v constant).
    2. (b)Wavelength ratio = 6.0 × 10⁻⁷ ÷ 6.0 × 10⁻¹⁰ = 1000. Frequency is inversely proportional to wavelength, so Q's frequency is 1000 times higher. [2]

      • Wavelength of P ÷ wavelength of Q = 1000.
      • Frequency of Q is 1000 times higher (frequency inversely proportional to wavelength).

    Revise: Electromagnetic spectrum · Electromagnetic spectrum simulation

  13. Question 13 (6 marks)

    1. (a)Both lenses refract light, and in both ray diagrams a ray aimed at the lens centre carries straight on. A convex lens makes parallel rays converge through the principal focus, while a concave lens makes them diverge as if from the principal focus on the object's side. With the object further away than the principal focus, a convex lens forms a real, inverted image on the far side, which can be shown on a screen; it can be diminished, the same size or magnified depending on the object's position. With the object closer than the principal focus, a convex lens forms a virtual, upright, magnified image on the same side as the object. A concave lens always forms a virtual, upright, diminished image on the same side as the object, between the principal focus and the lens. Virtual images cannot be shown on a screen, because the rays only appear to come from them. (Level-of-response marking: examiners compare the whole answer with level descriptors. The top level needs a clear comparison that covers both lenses, real and virtual images, and how the convex lens's image depends on where the object is.) [6]

      • Both lenses refract light; a ray through the centre of either lens is not bent.
      • Convex lens: parallel rays converge to the principal focus; concave lens: they diverge as if from the principal focus.
      • Convex lens, object beyond the principal focus: real, inverted image on the far side of the lens.
      • Convex lens, object closer than the principal focus: virtual, upright, magnified image on the object's side.
      • Concave lens: the image is always virtual, upright and diminished, on the object's side.
      • A real image can be shown on a screen; a virtual image cannot, because the light only appears to come from it.

    Revise: Lenses · Lenses and ray diagrams simulation

  14. Question 14 (6 marks)

    1. (a)The first finger represents the magnetic field (from N to S). The second finger represents the conventional current. [2]

      • First finger: the (direction of the) magnetic field.
      • Second finger: the (direction of the conventional) current.
    2. (b)No two of them are parallel: force, field and current are all at right angles to one another. [1]

      • All three at right angles (90°) to one another.
    3. (c)The magnetic flux density (strength of the field), the size of the current, and the length of wire inside the field. [3]

      • Magnetic flux density (strength of the magnetic field).
      • Current in the wire.
      • Length of the wire in the field.

    Revise: Fleming's left-hand rule · The motor effect simulation

  15. Question 15 (6 marks)

    1. (a)The moving magnet induces a p.d. across the coil, and because the circuit is complete, a current flows. The induced current sets up its own magnetic field, which opposes the change that caused it. The end of the coil facing the magnet becomes an N pole, so it repels the approaching N pole of the magnet. [4]

      • A p.d. is induced, and the complete circuit lets a current flow.
      • The induced current produces its own magnetic field.
      • This field opposes the change (the movement of the magnet).
      • An N pole forms at the coil's near end and repels the magnet's N pole.
    2. (b)A p.d. is still induced, but without a complete circuit no current flows. With no current, the coil produces no magnetic field to oppose the magnet. [2]

      • No complete circuit, so no induced current.
      • No current means no magnetic field from the coil to oppose the magnet.

    Revise: Induced potential (generator effect) · Electromagnetic induction simulation

  16. Question 16 (6 marks)

    1. (a)As the magnet slides through the coil, the magnetic field through the coil changes (the turns cut the magnet's field lines). This induces a potential difference across the coil: the generator effect. The coil sits in a closed circuit, so the p.d. drives a current. As the magnet moves to and fro, the direction of the induced p.d. keeps reversing, so the current alternates. When the torch is held still, nothing changes and no current is produced. A bigger p.d., and so a bigger current, could come from a stronger magnet or from more turns of wire on the coil. Shaking faster also helps, but that changes how the torch is used, not how it is designed. (Levels-marked question: the whole response is read and matched to a level descriptor. Full marks need a linked explanation plus clear design changes.) [6]

      • The magnet moves relative to the coil, so the field through the coil changes (field lines are cut).
      • The coil has a p.d. induced across it (generator effect).
      • The circuit is complete, so an induced current flows.
      • The current keeps reversing as the magnet moves to and fro; there is no current when the torch is still.
      • Use a stronger magnet.
      • Wind extra turns onto the coil (shaking faster is not a design change).

    Revise: Induced potential (generator effect) · Electromagnetic induction simulation

  17. Question 17 (5 marks)

    1. (a)It was a very small region, which was extremely hot and extremely dense. [2]

      • very small (tiny) region
      • extremely hot and (extremely) dense
    2. (b)Space itself is expanding, so the distance between every pair of galaxies is increasing. An observer in any other galaxy would also see almost all galaxies moving away, so there is no centre. [2]

      • space itself expands / the distance between all galaxies increases
      • observers in any galaxy see the same thing, so there is no centre
    3. (c)A theory can never be proved by observations: new evidence might be found that the theory cannot explain, and then it would have to change. (Also accept: another explanation might fit the same observations.) [1]

      • new evidence could disagree with the theory / another explanation might fit the same observations

    Revise: Red-shift and the Big Bang · Red-shift and the expanding universe simulation