An original Labverse practice paper — not an official exam paper
GCSE Physics — AQA
AQA GCSE Physics Paper 2 practice paper C
Written by Labverse from our own exam-style questions, to the same time and total marks as AQA’s Paper 2 (8463/2F, 8463/2H), on the same topics. It is not set, checked or endorsed by AQA.
- Time allowed
- 1 hour 45 minutes
- Total marks
- 100
- Questions
- 16
- Level
- All tiers
Instructions
- Answer every question. Work in one sitting and stop when the time is up.
- The marks for each part are shown beside it. Use them to judge how much to write.
- Show your working for calculations and give the unit with every answer.
- Questions marked Higher tier are for Higher-tier students only; on Foundation, skip them.
To print the answers too, open the mark scheme at the end first.
Marks by topic
- Working scientifically · 4 marks
- Forces · 29 marks
- Forces and motion · 19 marks
- Waves · 18 marks
- Electromagnetic waves · 11 marks
- Magnetism and electromagnetism · 13 marks
- Space physics · 6 marks
Questions
- Question 1 (4 marks)Accuracy, precision and errors
A student has two thermometers. Thermometer P is a liquid-in-glass thermometer marked every 1 °C. Thermometer Q is digital and shows temperatures to 0.1 °C.
(a)Give the resolution of thermometer Q.
[1](b)Both thermometers are put into melting ice, which is at 0 °C. P reads 0 °C and Q reads 1.4 °C. Explain why Q gives less accurate readings than P even though its resolution is better.
[2](c)Q then reads 37.9 °C in a beaker of warm water. Assume its error is the same at all temperatures. Calculate the corrected temperature.
[1]
- Question 2 (8 marks)Gravity, weight and mass
A student hangs slotted masses, one at a time, from a calibrated newtonmeter. Results: 0.10 kg reads 1.0 N; 0.20 kg reads 2.0 N; 0.30 kg reads 2.9 N; 0.40 kg reads 3.9 N; 0.50 kg reads 4.9 N.
(a)Explain what is meant by a calibrated newtonmeter.
[1](b)Describe the relationship between weight and mass shown by the results. Use data in your answer.
[2](c)Write the relationship between weight (W) and mass (m) using the proportionality symbol.
[1](d)Use the result for 0.50 kg to calculate the gravitational field strength.
[2](e)Another student's newtonmeter reads 0.3 N when nothing is hanging from it. Explain how this affects that student's readings and what they should do about it.
[2]
- Question 3 (7 marks)Pressure in fluidsPhysics only
A cyclist pumps up a bicycle tyre. The cyclist pushes the handle of the pump with a force of 90 N. The piston inside the pump has an area of 4.5 cm².
(a)Show that the area of the piston is 4.5 × 10⁻⁴ m².
[1](b)Calculate the pressure that the piston exerts on the air in the pump. Give your answer in kPa.
[3](c)The air in the tyre pushes on the inside of the tyre. Describe the direction of this force at any point on the tyre.
[1](d)Another pump has a piston with half the area. The cyclist pushes it with the same force. Explain how the pressure on the air compares.
[2]
- Question 4 (7 marks)Pressure in fluidsPhysics only
When a pressure cooker is working, the steam inside is at a pressure 100 kPa greater than the air outside. The lid has an area of 0.050 m². A small valve in the lid has an area of 0.10 cm².
(a)Calculate the resultant force on the lid caused by this difference in pressure.
[2](b)Convert the area of the valve into m².
[1](c)Calculate the resultant force on the valve.
[2](d)A small weight is enough to hold the valve shut, but the lid needs strong clips. Explain why.
[2]
- Question 5 (7 marks)Atmospheric pressurePhysics only
GCSE Physics only. An airliner cruises 11 km above sea level, where the air pressure outside is 23 kPa. The air in the cabin is kept at 75 kPa. One cabin window has an area of 0.060 m².
(a)Explain why the air pressure at 11 km is much lower than at sea level.
[3](b)Calculate the resultant force on the window caused by the difference in pressure, and give its direction.
[4]
- Question 6 (4 marks)Speed and velocity
A student sees a flash of lightning and hears the thunder 4.5 s later. The speed of sound in air is 330 m/s.
(a)Calculate the distance to the lightning. Give your answer to 2 significant figures.
[3](b)Give one reason why the student's answer may not be accurate.
[1]
- Question 7 (3 marks)Acceleration
A sprinter accelerates from rest to 9.0 m/s in the first 1.8 s of a race.
(a)Calculate the average acceleration of the sprinter.
[2](b)Compare the sprinter's acceleration with the acceleration of an object in free fall.
[1]
- Question 8 (6 marks)Newton's first law
A crane lifts a steel beam of mass 1200 kg. Gravitational field strength = 9.8 N/kg. Ignore air resistance.
(a)Calculate the weight of the beam.
[2](b)The beam rises at a constant speed. State the tension in the crane's cable. Give a reason for your answer.
[2](c)A student says: 'The tension must be bigger than the weight, otherwise the beam could not keep going up.' Explain why the student is wrong.
[2]
- Question 9 (6 marks)Changes in momentumHigher tierPhysics only
Higher tier, physics only. A cyclist falls off and their head, of mass 4.5 kg, hits the road at 6.0 m/s. With a helmet, the head comes to rest in 0.015 s. Without a helmet, it would come to rest in 0.0030 s.
(a)Calculate the average deceleration of the head when the helmet is worn.
[2](b)Calculate the average resultant force on the head when the helmet is worn.
[2](c)Show that the average resultant force on the head would be five times as large without the helmet.
[2]
- Question 10 (8 marks)Transverse and longitudinal waves
A loudspeaker on a stage plays a steady note. The sound travels through the air to an audience 20 m away.
(a)What type of wave is sound in air?
[1](b)Describe how the air particles between the stage and the audience move as the sound passes through them.
[2](c)The sound wave contains compressions and rarefactions. Describe the difference between a compression and a rarefaction.
[2](d)Sound travels through the air at 330 m/s. Calculate the time the sound takes to reach the audience.
[3]
- Question 11 (10 marks)Reflection of wavesPhysics only
A teacher uses a ripple tank to show straight water waves reflecting from a straight metal barrier. The vibrating bar has a frequency of 6.0 Hz. On a photograph taken with a ruler beside the tank, 10 wavelengths cover a distance of 25 cm.
(a)The ripples strike the barrier with an angle of incidence of 50°. Give the angle of reflection.
[1](b)Calculate the wavelength of the ripples in metres.
[2](c)Write down the equation that links frequency (f), wavelength (λ) and wave speed (v).
[1](d)Calculate the speed of the ripples.
[2](e)State how the wavelength of the reflected ripples compares with the wavelength of the incoming ripples. Give a reason for your answer.
[2](f)The edges of the tank are lined with sloping foam. Explain why.
[2]
- Question 12 (5 marks)Refraction
A narrow beam of light in air strikes one face of a rectangular glass block at an angle. It leaves through the opposite, parallel face.
(a)Give the name of the line drawn at 90° to the surface where the ray enters the block.
[1](b)Describe how the direction of the ray changes as it enters the glass.
[1](c)Describe the path of the ray when it leaves the block through the opposite surface.
[2](d)A second ray hits the block along the normal. Describe what happens to this ray.
[1]
- Question 13 (6 marks)Infrared radiation and surfaces
After a marathon in London, each runner is wrapped in a thin blanket made of shiny metal foil.
(a)Infrared is part of the electromagnetic spectrum. Name the part of the spectrum whose wavelengths are just shorter than those of infrared.
[1](b)Give two properties that infrared shares with all other electromagnetic waves.
[2](c)Explain how the shiny surface of the blanket helps the runner to stay warm.
[2](d)Higher tier. A wall painted white reflects most of the visible light that falls on it, but it absorbs most of the infrared from a warm radiator. What does this show about how a material interacts with electromagnetic waves?
[1]
- Question 14 (5 marks)Magnetic fields
A diagram shows the field lines around a bar magnet. Point P is just beyond the N pole, where the lines are very close together. Point Q is a long way from the magnet, where the lines are far apart.
(a)At which point is the magnetic field stronger? Give a reason for your answer.
[2](b)State which way the field points at P.
[1](c)Describe what is meant by the field's direction at P.
[1](d)Suggest why the field lines on the diagram never cross each other.
[1]
- Question 15 (8 marks)Electromagnetism and solenoids
A solenoid is made by winding insulated copper wire around a cardboard tube, and it is connected to a battery. Looking at end A from outside the tube, the current goes anticlockwise around the turns. End B is at the other end of the tube.
(a)State which end of the solenoid is the north pole.
[1](b)Describe the magnetic field produced by the solenoid, inside and outside the tube.
[3](c)A plotting compass is placed just beyond end B, on the axis of the solenoid. State which way the N end of the compass needle points, and explain why.
[2](d)Explain why winding the wire into a solenoid gives a much stronger magnetic field than the same wire laid out straight with the same current.
[2]
- Question 16 (6 marks)Life cycle of a starPhysics only
A star the same size as the Sun began as a cloud of dust and gas. It is now a main sequence star.
(a)Give the name for a cloud of dust and gas in space.
[1](b)Name the force that pulled the dust and gas together.
[1](c)Before it becomes a black dwarf, the star will pass through two more stages. Name these two stages in the correct order.
[2](d)Explain why this star will never become a black hole.
[2]
End of practice paper · 100 marks in total
Mark schemeOpen it only after you have finished the paper.ShowHide
Question 1 (4 marks)
(a)0.1 °C [1]
- 0.1 °C
(b)Q has a systematic (zero) error: it reads 1.4 °C above the true value. Resolution is only the smallest change Q can show; it does not bring the readings closer to the true value. [2]
- Q reads 1.4 °C above the true value (a zero / systematic error)
- Better resolution only means smaller changes can be shown; it does not make readings closer to the true value
(c)37.9 − 1.4 = 36.5 °C [1]
- 36.5 °C
Revise: Accuracy, precision and errors · Accuracy, precision and errors simulation
Question 2 (8 marks)
(a)Its scale has been checked or marked using known weights, so the readings it gives are correct. [1]
- The scale has been checked or marked against known weights, so its readings are accurate.
(b)As the mass increases, the weight increases in direct proportion. For example, doubling the mass from 0.10 kg to 0.20 kg doubles the reading from 1.0 N to 2.0 N. [2]
- As the mass increases, the weight increases.
- In direct proportion, supported by data, e.g. doubling the mass from 0.10 kg to 0.20 kg doubles the reading from 1.0 N to 2.0 N.
(c)W ∝ m [1]
- W ∝ m
(d)g = W ÷ m = 4.9 ÷ 0.50 = 9.8 N/kg [2]
- g = 4.9 ÷ 0.50
- g = 9.8 N/kg
(e)Every reading will be 0.3 N too high (a zero error). The student should adjust the newtonmeter to read zero before hanging any masses, or subtract 0.3 N from each reading. [2]
- Every reading is 0.3 N too large (a zero error, which is a systematic error).
- Reset the newtonmeter to zero before use (or subtract 0.3 N from every reading).
Revise: Gravity, weight and mass · Weight, mass and gravity simulation
Question 3 (7 marks)
(a)1 m² = 10 000 cm², so 4.5 cm² = 4.5 ÷ 10 000 = 4.5 × 10⁻⁴ m² [1]
- 4.5 ÷ 10 000 shown, using 1 m² = 10 000 cm².
(b)p = F ÷ A = 90 ÷ (4.5 × 10⁻⁴) = 200 000 Pa = 200 kPa [3]
- p = 90 ÷ (4.5 × 10⁻⁴)
- 200 000 Pa
- 200 kPa
(c)Outwards, at right angles to the inner surface of the tyre at that point. [1]
- Outwards and at right angles (normal) to the tyre's surface at that point.
(d)The pressure is twice as big (400 kPa). The same force now acts on half the area, and pressure = force ÷ area. [2]
- The pressure doubles (400 kPa).
- The same force acts on a smaller area (pressure is inversely proportional to area).
Question 4 (7 marks)
(a)F = pA = 100 000 Pa × 0.050 m² = 5000 N [2]
- F = 100 000 × 0.050 (100 kPa written as 100 000 Pa)
- 5000 N
(b)0.10 ÷ 10 000 = 1.0 × 10⁻⁵ m² [1]
- 1.0 × 10⁻⁵ m² (0.000010 m²)
(c)F = 100 000 Pa × 1.0 × 10⁻⁵ m² = 1.0 N [2]
- F = 100 000 × 1.0 × 10⁻⁵ (allow their area)
- 1.0 N
(d)The same pressure difference acts on both, but the lid's area is 5000 times the valve's. Force = pressure × area, so the force on the lid is 5000 N compared with only 1.0 N on the valve. [2]
- The same pressure acts on a much larger area (5000 times as large).
- So the force on the lid is far bigger (5000 N against 1.0 N), from F = pA.
Question 5 (7 marks)
(a)At 11 km there is much less air above, so the weight of air pressing down is smaller. The air is less dense, with fewer molecules in each cubic metre. So fewer molecules strike each square metre of a surface every second, and the force per unit area is smaller. [3]
- Fewer air molecules above, so a smaller weight of air pressing down.
- The air is less dense: fewer molecules per unit volume.
- Fewer collisions with a surface per second, so a smaller force per unit area.
(b)Difference in pressure = 75 − 23 = 52 kPa = 52 000 Pa. F = pA = 52 000 × 0.060 = 3120 N (about 3100 N), acting outwards, from the cabin towards the outside air. [4]
- Difference in pressure = 52 kPa = 52 000 Pa.
- F = 52 000 × 0.060
- F = 3120 N (accept 3100 N).
- Direction: outwards (from the cabin to the outside).
Revise: Atmospheric pressure · Atmospheric pressure and altitude simulation
Question 6 (4 marks)
(a)s = v t = 330 × 4.5 = 1485 m, which is 1500 m to 2 significant figures. [3]
- s = 330 × 4.5
- s = 1485 (m)
- s = 1500 m (2 s.f.)
(b)Human reaction time: the stopwatch may be started or stopped late. [1]
- Reaction time when using the stopwatch (or the speed of sound varies with conditions).
Revise: Speed and velocity · Motion graphs simulation
Question 7 (3 marks)
(a)a = 9.0 ÷ 1.8 = 5.0 m/s² [2]
- a = 9.0 ÷ 1.8
- a = 5.0 m/s²
(b)It is about half of the free-fall acceleration of 9.8 m/s². [1]
- Smaller than / about half of 9.8 m/s².
Revise: Acceleration · Motion graphs simulation
Question 8 (6 marks)
(a)W = m g = 1200 × 9.8 = 11 760 N [2]
- W = 1200 × 9.8
- W = 11 760 N (accept 11 800 N)
(b)11 760 N, because the beam moves at a constant velocity, so the resultant force is zero and the tension equals the weight. [2]
- 11 760 N (accept 11 800 N, or equal to the weight).
- Constant velocity, so the resultant force is zero.
(c)A resultant force is only needed to change the velocity. Once the beam is rising at a steady speed, zero resultant force keeps it rising at that speed, so the tension equals the weight. [2]
- A resultant force is needed only to change velocity (speed up, slow down or change direction).
- At a constant upward velocity the resultant force is zero, so tension equals weight.
Revise: Newton's first law · Free-body diagrams and resultant force simulation
Question 9 (6 marks)
(a)a = Δv ÷ Δt = 6.0 ÷ 0.015 = 400 m/s² [2]
- a = 6.0 ÷ 0.015
- a = 400 m/s²
(b)F = m a = 4.5 × 400 = 1800 N (or F = 4.5 × 6.0 ÷ 0.015 = 1800 N) [2]
- F = 4.5 × 400 (or 4.5 × 6.0 ÷ 0.015)
- F = 1800 N
(c)F = 4.5 × 6.0 ÷ 0.0030 = 9000 N, and 9000 ÷ 1800 = 5 [2]
- F = 4.5 × 6.0 ÷ 0.0030 = 9000 N
- 9000 ÷ 1800 = 5 (or the time is one fifth as long, so the force is five times as large).
Revise: Changes in momentum · Impulse and car safety simulation
Question 10 (8 marks)
(a)Longitudinal. [1]
- Longitudinal.
(b)Each air particle oscillates backwards and forwards about a fixed position, with no overall movement towards the audience. The oscillations are parallel to the direction in which the sound transfers energy. [2]
- Particles oscillate (vibrate) about a fixed position and do not move overall towards the audience.
- The oscillations are parallel to the direction of energy transfer (the direction the sound travels).
(c)In a compression the air particles are closer together than normal, so the pressure is a little higher. In a rarefaction they are further apart than normal, so the pressure is a little lower. [2]
- Compression: particles closer together than normal (higher pressure).
- Rarefaction: particles further apart than normal (lower pressure).
(d)t = s ÷ v = 20 ÷ 330 = 0.061 s [3]
- t = s ÷ v (s = v t rearranged)
- t = 20 ÷ 330
- t = 0.061 s (accept 0.06 s)
Revise: Transverse and longitudinal waves · Transverse and longitudinal waves simulation
Question 11 (10 marks)
(a)50° [1]
- 50°
(b)λ = 25 ÷ 10 = 2.5 cm = 0.025 m [2]
- 25 ÷ 10 = 2.5 cm
- 0.025 m
(c)v = f λ [1]
- v = f λ (or wave speed = frequency × wavelength)
(d)v = f λ = 6.0 × 0.025 = 0.15 m/s [2]
- 6.0 × 0.025 (allow their wavelength in m)
- 0.15 m/s
(e)It is the same, because the reflected ripples are in the same water, so their speed and frequency are unchanged. [2]
- The same wavelength.
- Same water (same depth), so the speed and frequency do not change.
(f)The foam absorbs the ripples that reach the edges, so they are not reflected back across the tank to spoil the pattern. [2]
- The foam absorbs the ripples at the edges.
- So no reflections from the sides confuse the pattern being studied.
Revise: Reflection of waves · Ripple tank simulation
Question 12 (5 marks)
(a)The normal. [1]
- The normal.
(b)It bends towards the normal. [1]
- Bends towards the normal (angle of refraction is smaller than the angle of incidence).
(c)It bends away from the normal and leaves the block travelling parallel to the original ray, shifted sideways. [2]
- Bends away from the normal.
- Emerging ray is parallel to the incident ray.
(d)It passes into the glass without changing direction. [1]
- No change in direction (it goes straight through).
Question 13 (6 marks)
(a)Visible light (red light). [1]
- Visible light (allow red light).
(b)Any two from: they are transverse waves; they all move at one speed through a vacuum; they can travel through a vacuum (no medium is needed); they transfer energy from a source to an absorber. [2]
- One correct property, e.g. transverse / all have one speed in a vacuum.
- A second correct property, e.g. needs no medium / transfers energy from source to absorber.
(c)A shiny surface is a poor emitter of infrared, so the blanket gives out little infrared to the surroundings. Its inner surface also reflects infrared from the runner's body back towards the runner, so less energy is transferred away. [2]
- Shiny surface is a poor emitter, so little infrared is given out to the surroundings.
- The shiny surface reflects infrared from the body back towards the runner / less energy is transferred away from the runner.
(d)How a material absorbs or reflects electromagnetic waves can depend on their wavelength. [1]
- Absorption / reflection by a material varies with the wavelength of the wave.
Revise: Infrared radiation and surfaces · Conduction, convection and radiation simulation
Question 14 (5 marks)
(a)P. The field lines are closer together there. [2]
- P
- The field lines are closer together at P (it is close to a pole).
(b)Away from the N pole of the magnet. [1]
- Away from the magnet / away from the N pole.
(c)It is the way a north pole placed at P would be pushed. [1]
- The direction a north pole at P would be pushed (the direction of the force on it).
(d)A compass at any place can line up in only one direction. Crossing lines would mean two directions at the same place. [1]
- The field at any place has a single direction (crossing lines would give two).
Revise: Magnetic fields · Magnetic field of a bar magnet simulation
Question 15 (8 marks)
(a)End A. [1]
- End A.
(b)Inside the tube the field is strong, and its lines are straight, parallel and equally spaced, which shows it is uniform. Outside, the pattern matches a bar magnet's, with lines running round from end A to end B. [3]
- Inside: strong (stronger than outside).
- Inside: uniform (straight, parallel, evenly spaced lines).
- Outside: shaped like a bar magnet's field, with lines from A round to B.
(c)Towards the solenoid. End B is a south pole: outside the solenoid the field points into end B, and unlike poles attract, so the N end of the needle is pulled towards it. [2]
- Towards the solenoid (towards end B).
- End B is a south pole, which attracts the N end of the needle (the field there points into B).
(d)Through the middle of the coil, the field of each turn points in the same direction. These fields reinforce one another, so the field inside is strong. [2]
- Inside the coil the field of each turn points the same way.
- So the turns' fields add up (reinforce each other), giving a stronger field.
Revise: Electromagnetism and solenoids · Magnetic field around a wire and solenoid simulation
Question 16 (6 marks)
(a)A nebula. [1]
- nebula
(b)Gravity (gravitational attraction). [1]
- gravity / gravitational attraction
(c)First a red giant, then a white dwarf. [2]
- red giant
- white dwarf, named after the red giant
(d)It does not have enough mass. Black holes come only from stars far heavier than the Sun, whose cores collapse at the end of their lives; a star the size of the Sun ends as a white dwarf. [2]
- its mass is too small / it is not massive enough
- only stars much more massive than the Sun become supernovae, which can leave a black hole
Revise: Life cycle of a star · Life cycle of stars simulation