Skip to content

GCSE Physics — AQA · Forces and motion

Changes in momentum

4.5.7.3Higher tierPhysics only

Higher tier, GCSE Physics only. Resultant force equals the rate of change of momentum, F = mΔv/Δt, given on the equation sheet. Seat belts, air bags, crumple zones, helmets and soft surfaces make the momentum change take longer, so the force is smaller.

Loading simulation…

Symbols match your course. Open the full impulse and car safety simulation for more presets and teacher tools.

Higher tier and physics only

Spec point 4.5.7.3 is Higher tier only and GCSE Physics only, so neither Foundation nor Combined Science papers test it. You need to:

  • link a resultant force to the rate of change of momentum
  • calculate with F=mΔvΔtF = \dfrac{m\Delta v}{\Delta t}
  • explain how seat belts, air bags, gym crash mats, cycle helmets and soft playground surfaces reduce forces
  • combine F=maF = ma with the acceleration equation to work out how changing one quantity changes the others.

The equation is given on the Physics equation sheet (Higher tier), so you use it rather than memorise it.

Force and the rate of change of momentum

If the resultant force on an object is not zero, its velocity changes, and so does its momentum. Two familiar equations show how. Newton's second law says F=maF = ma, and acceleration is a=v−uta = \dfrac{v - u}{t}. Substitute the second into the first:

F=mΔvΔtF = \dfrac{m\Delta v}{\Delta t}

FF is the resultant force in N, mm is the mass in kg, Δv=v−u\Delta v = v - u is the change in velocity in m/s, and Δt\Delta t is the time taken in s. Since mΔvm\Delta v is the change in momentum, force equals change in momentum divided by time: the rate of change of momentum.

Worked example 1: a penalty kick. A 0.45 kg football starts at rest. The boot touches it for 0.012 s, and it leaves at 24 m/s. Find the average force on the ball.

Given: m=0.45m = 0.45 kg, Δv=24−0=24\Delta v = 24 - 0 = 24 m/s, Δt=0.012\Delta t = 0.012 s. Equation: F=mΔvΔtF = \dfrac{m\Delta v}{\Delta t}. Substitution: F=0.45×240.012=10.80.012F = \dfrac{0.45 \times 24}{0.012} = \dfrac{10.8}{0.012}. Answer: F=900F = 900 N, in the direction the ball moves.

Direction matters: a ball hitting a wall at 8 m/s and coming back at 6 m/s has a change in velocity of 14 m/s, not 2 m/s.

Why safety features work

In a crash or fall, a person's momentum drops to zero. The size of that change depends only on their mass and speed, so no safety feature can alter it. A feature makes the change take longer. Then the rate of change of momentum is smaller, the force on the person is smaller, and injuries are less likely or less severe.

FeatureWhat lengthens the stopping time
Seat beltIt stretches slightly, so the wearer slows down with the car instead of hitting the dashboard.
Air bagIt inflates, then lets gas out as the head and chest press into it.
Crumple zoneThe front or back of the car folds up, so the car takes longer to stop.
Cycle helmetIts foam liner crushes, so the head stops more gradually.
Crash mat or playground surfaceFoam, rubber or bark chippings squash under the person landing.

This fits F=maF = ma too: a longer stopping time gives a smaller deceleration, a=ΔvΔta = \dfrac{\Delta v}{\Delta t}, and the same mass then needs a smaller resultant force.

Worked example 2: a playground fall. A 30 kg child lands at 5.0 m/s and stops in 0.010 s on concrete, or in 0.060 s on a rubber surface. Compare the average resultant forces.

Given: m=30m = 30 kg, Δv=5.0\Delta v = 5.0 m/s, so mΔv=150m\Delta v = 150 kg m/s. Equation: F=mΔvΔtF = \dfrac{m\Delta v}{\Delta t}. Substitution: concrete, F=1500.010F = \dfrac{150}{0.010}; rubber, F=1500.060F = \dfrac{150}{0.060}. Answer: 15 000 N on concrete and 2500 N on rubber. Six times the time gives one sixth of the force.

Using the simulation

In the simulation above, the set-up starts as Modern car: everything on: a 1000 kg car at 15 m/s carrying a 75 kg crash-test dummy, with the Crumple zone, Seat belt and Airbag toggles all on. Press Play to run the crash. The table gives the car's change in momentum as 15000 kg m/s, its stopping time as 66.7 ms and the average force on it as 225 kN. Check: 15 000÷0.0667≈225 00015\,000 \div 0.0667 \approx 225\,000 N.

Now choose No safety features from the Set-up menu and press Play again. The change in momentum stays at 15000 kg m/s, but the stopping time falls to 13.3 ms and the car's average force rises to 1130 kN (exactly 1125 kN), five times as much. The dummy's force grows from 10.5 kN to 84.4 kN. Press Slow-mo, then Replay, both beside Play, to watch the unbelted dummy hit the steering wheel.

All these times and forces are model values, not crash-test measurements: the model car crushes 0.50 m with a crumple zone and 0.10 m with a stiff front.

Equations

  • Force and rate of change of momentum

    On the equation sheet · Higher tier · Physics only

    F=mΔvΔt

    force = change in momentum ÷ time taken

    Open calculator →

Common mistakes

  • Saying that a safety feature reduces the change in momentum. The mass and the change in velocity fix that; the feature increases the time the change takes.
  • Writing that an air bag or helmet absorbs the momentum or absorbs the force. Explain with time instead: longer time, smaller rate of change of momentum, smaller force.
  • Stopping an explanation at "it takes longer". Go on to say that the rate of change of momentum is smaller, so the force is smaller.
  • Ignoring direction when something bounces. A ball that arrives at 8 m/s and rebounds at 6 m/s has a change in velocity of 14 m/s, not 2 m/s.
  • Leaving a time in milliseconds. Divide by 1000 to change it to seconds before using F = mΔv/Δt.
  • Multiplying by the time instead of dividing by it. Check that a shorter time gives a bigger force.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.Higher tier, physics only. A tennis player serves a ball of mass 0.058 kg. At the moment the racket hits it, the ball is momentarily at rest. The racket is in contact with the ball for 0.0050 s, and the ball leaves the racket at 50 m/s.

    1. (a)Calculate the change in momentum of the ball.

      2 marks
      Show the answer

      Answer: Change in momentum = 0.058 × 50 = 2.9 kg m/s

      Marking points

      • 0.058 × (50 − 0)
      • 2.9 kg m/s
    2. (b)Calculate the average force exerted on the ball by the racket.

      2 marks
      Show the answer

      Answer: F = 2.9 ÷ 0.0050 = 580 N

      Marking points

      • F = 2.9 ÷ 0.0050 (or 0.058 × 50 ÷ 0.0050)
      • F = 580 N
    3. (c)A different racket stays in contact with the ball for longer. It exerts the same average force. Explain how this affects the speed at which the ball leaves the racket.

      2 marks
      Show the answer

      Answer: The ball leaves faster. The same force acting for a longer time gives a larger change in momentum, and the mass is unchanged, so the change in velocity is larger.

      Marking points

      • Force × time is larger, so the change in momentum is larger (mΔv = FΔt).
      • The mass is the same, so the ball leaves at a higher speed.
  2. 2.Higher tier, physics only. A ball of mass 0.40 kg moves horizontally at 8.0 m/s towards a wall. It hits the wall and rebounds along the same line at 6.0 m/s. The ball is in contact with the wall for 0.080 s.

    1. (a)Calculate the size of the change in momentum of the ball.

      3 marks
      Show the answer

      Answer: Taking towards the wall as positive, Δv = −6.0 − 8.0 = −14 m/s, so the change in momentum = 0.40 × 14 = 5.6 kg m/s (away from the wall).

      Marking points

      • Change in velocity = 14 m/s (directions taken into account; accept −14 m/s).
      • 0.40 × 14
      • 5.6 kg m/s
    2. (b)Calculate the average force exerted on the ball by the wall.

      2 marks
      Show the answer

      Answer: F = 5.6 ÷ 0.080 = 70 N, directed away from the wall

      Marking points

      • F = 5.6 ÷ 0.080
      • F = 70 N
  3. 3.Higher tier, physics only. Modern cars are fitted with crumple zones, seat belts and air bags.

    1. (a)Explain how wearing a seat belt reduces the risk of serious injury to a passenger in a crash. Refer to momentum in your answer.

      4 marks
      Show the answer

      Answer: The passenger's momentum falls to zero whether or not a belt is worn, so the change in momentum is the same. The belt stretches, so the passenger takes longer to stop. The rate of change of momentum is therefore smaller, so the force on the passenger is smaller.

      Marking points

      • The passenger's change in momentum is the same (momentum falls to zero either way).
      • The belt stretches, so the time taken for the passenger to stop increases.
      • The rate of change of momentum is smaller.
      • So the force on the passenger is smaller.
    2. (b)A car of mass 1200 kg is travelling at 13 m/s when it hits a wall. Its crumple zone brings it to rest in 0.080 s. Calculate the average force on the car.

      3 marks
      Show the answer

      Answer: Change in momentum = 1200 × 13 = 15 600 kg m/s; F = 15 600 ÷ 0.080 = 195 000 N

      Marking points

      • Change in momentum = 1200 × 13 = 15 600 kg m/s
      • F = 15 600 ÷ 0.080
      • F = 195 000 N (1.95 × 10⁵ N)
    3. (c)Without a crumple zone, the same car would stop in 0.020 s. Determine how many times larger the average force would be.

      2 marks
      Show the answer

      Answer: F = 15 600 ÷ 0.020 = 780 000 N, which is 4 times larger (the time is a quarter as long).

      Marking points

      • F = 15 600 ÷ 0.020 = 780 000 N, or the time is a quarter as long.
      • 4 times larger
  4. 4.Higher tier, physics only. A cyclist falls off and their head, of mass 4.5 kg, hits the road at 6.0 m/s. With a helmet, the head comes to rest in 0.015 s. Without a helmet, it would come to rest in 0.0030 s.

    1. (a)Calculate the average deceleration of the head when the helmet is worn.

      2 marks
      Show the answer

      Answer: a = Δv ÷ Δt = 6.0 ÷ 0.015 = 400 m/s²

      Marking points

      • a = 6.0 ÷ 0.015
      • a = 400 m/s²
    2. (b)Calculate the average resultant force on the head when the helmet is worn.

      2 marks
      Show the answer

      Answer: F = m a = 4.5 × 400 = 1800 N (or F = 4.5 × 6.0 ÷ 0.015 = 1800 N)

      Marking points

      • F = 4.5 × 400 (or 4.5 × 6.0 ÷ 0.015)
      • F = 1800 N
    3. (c)Show that the average resultant force on the head would be five times as large without the helmet.

      2 marks
      Show the answer

      Answer: F = 4.5 × 6.0 ÷ 0.0030 = 9000 N, and 9000 ÷ 1800 = 5

      Marking points

      • F = 4.5 × 6.0 ÷ 0.0030 = 9000 N
      • 9000 ÷ 1800 = 5 (or the time is one fifth as long, so the force is five times as large).

Quick check

6 questions

  1. 1.Which quantity is equal to the resultant force acting on an object?
  2. 2.The velocity of a 0.20 kg ball changes by 15 m/s in 0.050 s. What is the average resultant force on it?
  3. 3.How does a crumple zone reduce the force on a car in a crash?
  4. 4.A gymnast lands on a thick crash mat instead of a hard floor. Which statement is correct?
  5. 5.Which equation, given on the AQA Physics equation sheet, links force, mass, change in velocity and time taken?
  6. 6.In a crash, the time a car takes to stop is doubled while its mass and speed stay the same. What happens to the average force on the car?