Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2022 Paper 2 Foundation (8463/2F)

Set by AQA for AQA GCSE Physics, June 2022: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2022
Paper
Paper 2 Foundation
Code
8463/2F
Tier
Foundation
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

8 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.Two students each measure the thickness of the same coin four times with their own micrometer. The true thickness of the coin is 1.85 mm. Student A records 1.84 mm, 1.86 mm, 1.85 mm and 1.85 mm. Student B records 1.95 mm, 1.96 mm, 1.95 mm and 1.96 mm.

    From the topic: Measuring instruments

    1. (a)Give the resolution of the micrometers used.

      1 mark
      Show the answer

      Answer: 0.01 mm

      Marking points

      • 0.01 mm
    2. (b)Which student's readings are more accurate? Give a reason for your answer.

      2 marks
      Show the answer

      Answer: Student A. The mean of A's readings is 1.85 mm, the same as the true value, while B's mean (about 1.96 mm) is about 0.1 mm too large.

      Marking points

      • Student A
      • A's readings (mean 1.85 mm) are closer to the true value.
    3. (c)A teacher says that Student B's readings are precise. Explain what this means.

      1 mark
      Show the answer

      Answer: The repeat readings are very close to each other: they spread over only 0.01 mm.

      Marking points

      • The readings are close together / cluster closely (range only 0.01 mm).
    4. (d)Suggest the most likely cause of the error in Student B's readings, and how Student B could correct the results.

      2 marks
      Show the answer

      Answer: Student B's micrometer probably has a zero error of about +0.10 mm. B should close the micrometer with nothing in it, read the zero error, and subtract it from every reading.

      Marking points

      • A zero error (systematic error) in Student B's micrometer.
      • Close the micrometer with nothing between the jaws, read the zero error and subtract it from each reading.
  2. 2.A student lists six physical quantities: energy, velocity, mass, force, time and displacement.

    From the topic: Scalar and vector quantities

    1. (a)Explain how a scalar quantity is different from a vector quantity.

      2 marks
      Show the answer

      Answer: A scalar is fully given by its size (magnitude). A vector needs its size and a direction as well.

      Marking points

      • Scalar: size (magnitude) alone.
      • Vector: size and a direction.
    2. (b)Give two vector quantities from the student's list.

      2 marks
      Show the answer

      Answer: Any two of: velocity, force, displacement.

      Marking points

      • One correct vector: velocity, force or displacement.
      • A second, different correct vector (no scalar given).
    3. (c)The mass of an object is a scalar, but its weight is a vector. Explain why.

      2 marks
      Show the answer

      Answer: Gravity pulls on the object, and that pull, its weight, is a force. Forces act in a direction (weight acts downwards), whereas mass has no direction.

      Marking points

      • Weight is a force (due to gravity).
      • Forces act in a direction (weight acts down); mass does not.
  3. 3.A uniform metre rule is balanced on a pivot at its 50 cm mark, with its 0 cm end on the left. A 4.0 N weight hangs from the 10 cm mark and a 2.0 N weight hangs from the 30 cm mark. A third weight, W, hangs from the 75 cm mark so that the rule stays balanced.

    From the topic: Moments, levers and gears Physics only

    1. (a)Calculate the sum of the anticlockwise moments about the pivot.

      3 marks
      Show the answer

      Answer: 4.0 × 0.40 = 1.6 N m; 2.0 × 0.20 = 0.40 N m; total = 2.0 N m

      Marking points

      • Distances from the pivot of 0.40 m and 0.20 m used.
      • Moments of 1.6 N m and 0.40 N m.
      • Total anticlockwise moment = 2.0 N m
    2. (b)Use the principle of moments to calculate the weight W.

      3 marks
      Show the answer

      Answer: Clockwise moment = anticlockwise moment, so W × 0.25 = 2.0 and W = 8.0 N.

      Marking points

      • W × 0.25 = 2.0 (total clockwise moment = total anticlockwise moment).
      • W = 2.0 ÷ 0.25
      • W = 8.0 N
    3. (c)Explain why the weight of the metre rule was not included in your calculations.

      2 marks
      Show the answer

      Answer: The rule is uniform, so its weight acts at its centre of mass, the 50 cm mark. That is at the pivot, so the perpendicular distance is zero and the weight has no moment.

      Marking points

      • The weight of the rule acts at its centre of mass (the 50 cm mark), which is at the pivot.
      • So its perpendicular distance from the pivot is zero and its moment is zero.
  4. 4.GCSE Physics only. The table gives the atmospheric pressure at different heights above sea level. 0 km: 101 kPa. 2 km: 80 kPa. 4 km: 62 kPa. 6 km: 47 kPa. 8 km: 36 kPa.

    From the topic: Atmospheric pressure Physics only

    1. (a)Describe the pattern shown by the data.

      2 marks
      Show the answer

      Answer: The pressure decreases as the height increases. The drop for each 2 km gets smaller: 21 kPa between 0 km and 2 km, but only 11 kPa between 6 km and 8 km.

      Marking points

      • Pressure decreases as height increases.
      • The decrease for each 2 km becomes smaller as height increases (data quoted, e.g. 21 kPa then 11 kPa).
    2. (b)A town is 1.0 km above sea level. Estimate the atmospheric pressure in the town.

      1 mark
      Show the answer

      Answer: About 90 kPa (accept 88–92 kPa).

      Marking points

      • Any value from 88 kPa to 92 kPa.
    3. (c)A tent has a flat panel of area 2.5 m². Calculate the force of the atmosphere on one side of the panel when the tent is pitched 6 km above sea level.

      3 marks
      Show the answer

      Answer: p = 47 kPa = 47 000 Pa. F = pA = 47 000 × 2.5 = 117 500 N (about 1.2 × 10⁵ N).

      Marking points

      • 47 kPa converted to 47 000 Pa.
      • F = 47 000 × 2.5
      • F = 117 500 N (accept 1.2 × 10⁵ N).
    4. (d)Explain why the panel is not pushed in by this large force.

      2 marks
      Show the answer

      Answer: The air inside the tent is at almost the same pressure. It pushes back on the inner side of the panel just as hard, so the two forces cancel and the resultant force is about zero.

      Marking points

      • Air on the other side of the panel exerts an (almost) equal force in the opposite direction.
      • So the resultant force is (about) zero.
  5. 5.A train is travelling at 24 m/s. The driver brakes and the train's velocity falls uniformly to zero in 16 s.

    From the topic: Velocity–time graphs

    1. (a)Calculate the deceleration of the train.

      2 marks
      Show the answer

      Answer: a = (0 − 24) ÷ 16 = −1.5 m/s², so the deceleration is 1.5 m/s²

      Marking points

      • a = 24 ÷ 16 (or (0 − 24) ÷ 16)
      • Deceleration = 1.5 m/s² (accept a = −1.5 m/s²)
    2. (b)Higher tier. Sketch the velocity–time graph for the braking. Use the area under it to calculate the distance travelled while braking.

      2 marks
      Show the answer

      Answer: Area of triangle = ½ × 16 × 24 = 192 m

      Marking points

      • ½ × 16 × 24
      • 192 m (accept 190 m)
  6. 6.A delivery van has a mass of 2400 kg. When it pulls away, the resultant force on it is 3000 N.

    From the topic: Newton's second law

    1. (a)Write down the equation that links resultant force (F), mass (m) and acceleration (a).

      1 mark
      Show the answer

      Answer: F = m a

      Marking points

      • F = m a (resultant force = mass × acceleration)
    2. (b)Calculate the acceleration of the van.

      2 marks
      Show the answer

      Answer: a = 3000 ÷ 2400 = 1.25 m/s² (1.3 m/s² to 2 s.f.)

      Marking points

      • a = 3000 ÷ 2400
      • a = 1.25 m/s² (accept 1.3 m/s²)
    3. (c)Parcels are loaded into the van, so its mass becomes 3000 kg. The resultant force is still 3000 N. Calculate the new acceleration and explain why it is different.

      2 marks
      Show the answer

      Answer: a = 3000 ÷ 3000 = 1.0 m/s². It is smaller because, for a fixed resultant force, acceleration is inversely proportional to mass.

      Marking points

      • a = 1.0 m/s²
      • A greater mass with the same resultant force gives a smaller acceleration (a is inversely proportional to m).
  7. 7.A wave travels along a long stretched spring. A displacement–distance graph of the spring shows 5 complete waves across 3.0 m. The crests reach +4.0 cm and the troughs reach −4.0 cm.

    From the topic: Properties of waves

    1. (a)Give the amplitude of the wave.

      1 mark
      Show the answer

      Answer: 4.0 cm (0.040 m)

      Marking points

      • 4.0 cm or 0.040 m (not 8.0 cm)
    2. (b)Calculate the wavelength of the wave.

      2 marks
      Show the answer

      Answer: λ = 3.0 ÷ 5 = 0.60 m

      Marking points

      • λ = 3.0 ÷ 5
      • λ = 0.60 m
    3. (c)The frequency of the wave is 2.5 Hz. Calculate the wave speed.

      2 marks
      Show the answer

      Answer: v = f λ = 2.5 × 0.60 = 1.5 m/s

      Marking points

      • v = 2.5 × 0.60 (allow their wavelength)
      • v = 1.5 m/s
    4. (d)Calculate the period of the wave.

      2 marks
      Show the answer

      Answer: T = 1 ÷ f = 1 ÷ 2.5 = 0.40 s

      Marking points

      • T = 1 ÷ 2.5
      • T = 0.40 s
  8. 8.Rays of light travelling parallel to the principal axis pass through a concave lens with a focal length of 20 cm.

    From the topic: Lenses Physics only

    1. (a)Describe what happens to the rays as they pass through the lens.

      2 marks
      Show the answer

      Answer: They are refracted outwards so that they spread apart (diverge). Traced backwards, they all seem to come from the principal focus on the side of the lens the light entered.

      Marking points

      • The rays spread out / diverge.
      • They appear to come from the principal focus on the side the light enters.
    2. (b)Describe how the ray diagram symbol for a concave lens differs from the symbol for a convex lens.

      1 mark
      Show the answer

      Answer: Each symbol is a vertical line ending in two arrowheads. On the concave symbol they point inwards; on the convex symbol they point outwards.

      Marking points

      • Concave: arrowheads point inwards; convex: arrowheads point outwards.
    3. (c)An object 3.0 cm tall is placed 30 cm from the lens. The magnification is 0.40. Calculate the height of the image.

      3 marks
      Show the answer

      Answer: 0.40 = image height ÷ 3.0, so image height = 0.40 × 3.0 = 1.2 cm

      Marking points

      • 0.40 = image height ÷ 3.0
      • image height = 0.40 × 3.0
      • 1.2 cm
    4. (d)Explain why this image cannot be shown on a screen.

      2 marks
      Show the answer

      Answer: The image is virtual. The rays leaving the lens spread apart and never meet; they only appear to come from the image, so no light reaches a screen placed there.

      Marking points

      • The image is virtual / the rays diverge after the lens and never meet.
      • The light only appears to come from the image, so none arrives at a screen there.