Skip to content

GCSE Physics — AQA · Waves

Ultrasound and seismic waves

4.6.1.5Higher tierPhysics only

Higher tier, GCSE Physics only. Ultrasound is sound above 20 kHz; part of each pulse reflects at every boundary, so echo times give depths in scans and echo sounding. P-waves (longitudinal) cross solids and liquids; S-waves (transverse) are stopped by liquid, so the outer core is liquid.

Loading simulation…

Symbols match your course. Open the full speed of sound and echoes simulation for more presets and teacher tools.

Spec point 4.6.1.5: Physics only, Higher tier

This point is for GCSE Physics alone, examined on Higher tier papers. It adds no equation, but you recall distance travelled = speed × time, s=vts = vt. Be ready to:

  • explain, without calculation, how waves that change speed, reflect or are absorbed inside solids and liquids let us find things we cannot see
  • describe ultrasound, echo timing, its imaging uses and echo sounding
  • compare P-waves with S-waves and say what they show about the core.

For the hearing range, see Sound waves (4.6.1.4).

Ultrasound

Ultrasound means sound with a frequency above about 20 kHz, out of reach of human hearing. At each boundary between two different materials, such as fat and muscle, some of a pulse bounces back and the rest travels on, so one pulse returns an echo per boundary, nearest first. Each echo time includes the journey in and back:

depth=speed×echo time2\text{depth} = \frac{\text{speed} \times \text{echo time}}{2}

  • Medical imaging: pictures of soft tissue, such as an unborn baby. It does not ionise, so it is preferred to X-rays in pregnancy, though it warms tissue slightly.
  • Industrial imaging: a hidden crack in a weld or rail is a thin air gap, returning an extra echo before the far side's; the part is checked without damage.

Worked example 1: a scan. An echo from a baby's skull reaches the probe 0.13 ms after the pulse. Ultrasound travels at 1540 m/s in soft tissue. Given: t=1.3×10−4t = 1.3 \times 10^{-4} s. Equation: s=vts = vt, then halve. Substitution: s=1540×1.3×10−4=0.20s = 1540 \times 1.3 \times 10^{-4} = 0.20 m, in and back out. Answer: depth =0.20÷2=0.10= 0.20 \div 2 = 0.10 m (10 cm).

Echo sounding

A transducer under a ship fires short bursts of high-frequency sound, frequently ultrasound, downwards. The seabed echo gives the depth; earlier echoes reveal fish, wrecks or submarines.

Worked example 2: deep water. Far out at sea, a seabed echo returns after 2.4 s. Take 1500 m/s for sea water. Equation: s=vts = vt, then halve. Substitution: s=1500×2.4=3600s = 1500 \times 2.4 = 3600 m, down and back up. Answer: depth =3600÷2=1800= 3600 \div 2 = 1800 m.

Seismic waves

PropertyP-waves (primary)S-waves (secondary)
Wave typeLongitudinal: rock pushed and pulled along the pathTransverse: rock shaken across the path
SpeedFaster, so recorded firstSlower, so recorded second
Through solid rockYesYes
Through liquidYes, with a change of speedNo

Their speed changes with depth, so both kinds refract and follow curved paths through the mantle.

The evidence. On the far side of the Earth from an earthquake, no S-waves arrive directly: the S-wave shadow zone. To get there they would cross the core, so its outer part must be liquid. P-waves do cross it, but they refract at its edge, leaving a band with no direct P-waves. The zones' sizes give the core's size: its top is about 2900 km down (the inner core is solid). The deepest borehole reaches only about 12 km, so this evidence revealed a region nobody can observe directly.

Worked example 3: two arrivals. A seismometer is 210 km from an earthquake. Given: s=210 000s = 210\,000 m; take v=6000v = 6000 m/s for P-waves and 35003500 m/s for S-waves. Equation: t=svt = \dfrac{s}{v}. Substitution: t=210 0006000t = \dfrac{210\,000}{6000} and 210 0003500\dfrac{210\,000}{3500}. Answer: P-waves after 35 s, S-waves after 60 s, a 25 s gap.

What links them. A new material reflects part of a wave; a speed change bends or delays it; a layer that blocks one kind (liquid stops S-waves) shows what lies inside.

Echo sounding and scans on screen

In the simulation above, there is no seismic scene yet: read the P-waves and S-waves blog post instead.

  1. Choose Sonar in the scene menu and press Pulse: fish echo at 60.0 ms, seabed at 160 ms. Check 1500×0.160÷2=1201500 \times 0.160 \div 2 = 120 m in the Echoes from one pulse table (Readings, a tab on phones).
  2. Pick Sonar 1 kHz from Set-ups… and press Pulse: fish 1 m above the seabed give one echo: can’t be told apart. Choose Ultrasound 50 kHz under Pulse, then press Pulse: two echoes.
  3. Switch to Scan and press Pulse: echoes come from fat → muscle (1.50 cm), both sides of an organ and bone (11.0 cm). At Probe position 10% the organ's echoes vanish.
  4. Choose Steel block, press Pulse and slide Probe position to 80%. From 56% to 72% a crack adds an echo at 10.2 µs, and the far side's echo shrinks.

Equations

  • Speed, distance and time

    Learn this · Higher tier · Physics only

    s=vt

    distance travelled = speed × time

    Open calculator →

Common mistakes

  • Forgetting to halve. An echo time covers the journey to the boundary and back, so speed × time is twice the depth.
  • Writing that ultrasound is completely reflected at a boundary. Usually only part of it reflects and the rest goes on, which is how one pulse returns echoes from several boundaries.
  • Swapping the two kinds of seismic wave. Primary (P) waves are longitudinal, arrive first and get through liquids; secondary (S) waves are transverse, arrive later and are stopped by liquid.
  • Claiming the missing S-waves prove that the whole core is liquid, or that P-waves cannot cross liquid. Only the outer core is shown to be liquid, and P-waves do cross it, changing speed and direction at its edge.
  • Leaving times in µs or ms. Convert to seconds first (1 µs = 10⁻⁶ s, 1 ms = 10⁻³ s), or the depth comes out a million or a thousand times too big.
  • Treating ultrasound like X-rays. It is a mechanical wave, not ionising radiation; it still delivers a little energy as heat, so doctors scan only when there is a reason.

Exam-style questions

Original questions written in the style of GCSE AQA. Try each one before you reveal the answer.

  1. 1.Higher tier, physics only. A sonographer uses ultrasound to check on an unborn baby. The probe sends short pulses into the mother's body and detects the echoes that return.

    1. (a)What is ultrasound?

      1 mark
      Show the answer

      Answer: Sound of a frequency over 20 kHz, which people cannot hear.

      Marking points

      • sound of frequency over 20 kHz, which people cannot hear
    2. (b)Explain why one pulse produces several echoes.

      2 marks
      Show the answer

      Answer: At each boundary between two different tissues, part of the pulse is reflected and the rest is transmitted. The transmitted part reaches deeper boundaries, which reflect some of it too, so an echo returns from each boundary, later for deeper ones.

      Marking points

      • part of the ultrasound is reflected at each boundary between different tissues (media)
      • the rest is transmitted to deeper boundaries, so echoes return from each one at different times
    3. (c)An echo from the baby's spine returns 104 µs after the pulse leaves the probe. Take the speed of ultrasound in soft tissue as 1540 m/s. Calculate the depth of the spine below the probe.

      3 marks
      Show the answer

      Answer: s = v t = 1540 × 0.000104 = 0.16 m for the journey there and back, so the depth = 0.16 ÷ 2 = 0.080 m (8.0 cm).

      Marking points

      • 1540 × 0.000104 (time converted to seconds)
      • = 0.16 m for the journey there and back
      • depth = 0.080 m (8.0 cm)
    4. (d)Suggest why ultrasound, rather than X-rays, is used to scan an unborn baby.

      1 mark
      Show the answer

      Answer: Ultrasound is non-ionising, so it does not risk the ionisation damage to the baby's cells that X-rays can cause.

      Marking points

      • ultrasound is non-ionising (X-rays ionise and could damage the baby's cells)
  2. 2.Higher tier, physics only. A survey ship maps the seabed by echo sounding. Equipment under the hull fires short pulses of high-frequency sound at the seabed and picks up the echoes. Take the speed of sound in sea water as 1500 m/s.

    1. (a)The echo from the seabed arrives 0.96 s after a pulse is sent. Calculate the depth of the water.

      3 marks
      Show the answer

      Answer: Distance there and back = 1500 × 0.96 = 1440 m, so the depth = 1440 ÷ 2 = 720 m.

      Marking points

      • s = v t = 1500 × 0.96
      • = 1440 m (there and back)
      • depth = 720 m
    2. (b)A weaker echo arrives 0.30 s after the pulse. Calculate how far below the ship the object that reflected it is.

      2 marks
      Show the answer

      Answer: 1500 × 0.30 = 450 m there and back, so the object is 450 ÷ 2 = 225 m below the ship.

      Marking points

      • 1500 × 0.30 = 450 m
      • 450 ÷ 2 = 225 m
    3. (c)Suggest what this object could be.

      1 mark
      Show the answer

      Answer: A shoal of fish or a submarine.

      Marking points

      • a shoal of fish / a submarine (any object in the water above the seabed)
    4. (d)Further on, the seabed echo takes 1.30 s. State whether the water is deeper or shallower there. Give a reason.

      2 marks
      Show the answer

      Answer: Deeper. The echo takes longer, so at the same speed the pulse travels further down and back.

      Marking points

      • deeper
      • a longer echo time at the same speed means a longer journey
  3. 3.Higher tier, physics only. After a large earthquake, seismometers all around the world record the waves that reach them. Stations on the opposite side of the Earth from the earthquake detect P-waves, but no S-waves arrive there directly.

    1. (a)Give two differences between P-waves and S-waves.

      2 marks
      Show the answer

      Answer: P-waves are longitudinal, but S-waves are transverse. P-waves can travel through liquids as well as solids, but S-waves can only travel through solids. (P-waves are also faster.)

      Marking points

      • P-waves are longitudinal, S-waves are transverse
      • P-waves pass through liquids and solids, S-waves through solids only (allow: P-waves are faster)
    2. (b)Explain how observations of P-waves and S-waves give evidence about the structure of the Earth.

      6 marks
      Show the answer

      Answer: S-waves are transverse and are stopped by liquids, while P-waves get through. Stations on the far side of the Earth receive no direct S-waves: there is an S-wave shadow zone. S-waves heading there would have to cross the core, so the outer part of the core must be liquid. How wide the shadow zone is tells us how large the core is. P-waves do pass through the core, but their speed changes suddenly at its boundary, so they refract; this leaves a zone with no direct P-waves, which also helps fix the size of the core. Both kinds of wave follow curved paths because their speed changes gradually with depth. Nobody can see or drill down to the core, so this is the main evidence for its structure. (Level-of-response question: the answer is judged as a whole, not point by point. Level 3 (5–6 marks): a coherent account that ties the missing S-waves to a liquid outer core and also uses P-wave refraction or the size of the shadow zones. Level 2 (3–4 marks): the missing S-waves are connected to a liquid layer, with some supporting detail. Level 1 (1–2 marks): a few simple, relevant facts, for example that liquids stop S-waves. No relevant content: 0 marks.)

      Marking points

      • S-waves are transverse and cannot pass through liquids; P-waves can
      • no S-waves arrive directly on the far side of the Earth: an S-wave shadow zone
      • S-waves would have to pass through the core to reach these stations, so the (outer) core must be liquid
      • the extent of the shadow zone gives the size of the core
      • P-waves change speed at the core boundary and refract, leaving a P-wave shadow zone
      • curved wave paths show that the speed (the material) changes gradually with depth
    3. (c)Suggest why seismic waves are so important for finding out about the Earth's core.

      1 mark
      Show the answer

      Answer: The core is far too deep to reach or see: it starts about 2900 km down, while the deepest boreholes reach only about 12 km.

      Marking points

      • the core cannot be reached or seen (far too deep to drill to)
  4. 4.Higher tier, physics only. An engineer checks a steel rail for hidden cracks. A probe on top of the rail sends pulses of ultrasound straight down into it. The rail is 0.18 m tall.

    1. (a)The echo from the bottom of the rail returns 61 µs after a pulse is sent. Show that the speed of ultrasound in the steel is about 5900 m/s.

      3 marks
      Show the answer

      Answer: Distance there and back = 2 × 0.18 = 0.36 m. v = s ÷ t = 0.36 ÷ 0.000061 = 5900 m/s (5902 m/s).

      Marking points

      • total distance = 2 × 0.18 = 0.36 m
      • v = 0.36 ÷ 0.000061 (time in seconds)
      • v = 5900 m/s (5902 m/s)
    2. (b)At another point, an extra echo arrives 24 µs after the pulse, before the echo from the bottom. Calculate the depth of the crack below the probe.

      2 marks
      Show the answer

      Answer: 5900 × 0.000024 = 0.1416 m there and back, so the depth = 0.1416 ÷ 2 = 0.071 m (7.1 cm).

      Marking points

      • 5900 × 0.000024 = 0.14 m (0.1416 m)
      • depth = 0.071 m (7.1 cm; allow 0.070 m)
    3. (c)Explain why the crack produces an echo.

      2 marks
      Show the answer

      Answer: The crack is filled with air, so it forms a boundary between two different media, steel and air. Ultrasound is reflected at such a boundary (here almost completely), and the reflection returns to the probe as an echo.

      Marking points

      • the crack forms a boundary between two different media (steel and air)
      • ultrasound is reflected at the boundary and returns to the probe
    4. (d)Give one advantage of checking the rail in this way.

      1 mark
      Show the answer

      Answer: The rail is not damaged and does not have to be cut open, so it can stay in use.

      Marking points

      • no damage to the rail / it does not need to be cut open

Quick check

6 questions

  1. 1.Which statement describes ultrasound?
  2. 2.Which description fits S-waves?
  3. 3.A ship's echo sounder records a seabed echo 0.50 s after a pulse. Take 1500 m/s for sound in sea water. What depth does this give?
  4. 4.Why do no S-waves arrive directly at seismometers on the opposite side of the Earth to an earthquake?
  5. 5.In an ultrasound scan, why does one pulse return several echoes?
  6. 6.What did studying seismic waves allow scientists to do?