Seismic Waves: P-Waves, S-Waves and What They Reveal About the Earth's Core
Compare P-waves and S-waves from earthquakes, learn how a seismometer records them, see why the S-wave shadow zone proves part of the Earth's core is liquid, and use the time gap between the two arrivals to work out how far away an earthquake was.
Published · 8 min read
On this page
An earthquake sends two main kinds of wave through the inside of the Earth. P-waves (primary waves) are longitudinal: the rock vibrates back and forth, parallel to the way the wave is moving. They are faster, and they can pass through both solids and liquids. S-waves (secondary waves) are transverse: the rock vibrates at right angles to the wave's path. They are slower, and they cannot travel through liquids.
Because P-waves are faster, they always reach a recording station first. The S-waves follow. The time gap between the two arrivals grows with distance, so it tells scientists how far away the earthquake was.
Far from an earthquake, on the opposite side of the planet, S-waves never arrive directly. This S-wave shadow zone is the key evidence that the Earth's outer core is liquid.
How do P-waves and S-waves differ?
| Feature | P-waves | S-waves |
|---|---|---|
| Type of wave | Longitudinal | Transverse |
| How the rock moves | Squeezed and stretched along the path | Shaken from side to side across the path |
| Travel through solids? | Yes | Yes |
| Travel through liquids? | Yes, but at a different speed | No |
| Typical speed in the crust (approximate) | about 6 km/s | about 3.5 km/s |
| Arrives at a station | First | Second |
Both kinds generally travel faster through the deeper rock of the mantle. So the speeds in the table only describe the thin outer layer, the crust.
Why can't S-waves cross a liquid? A transverse wave works by each layer of material dragging the next one sideways. A solid resists being pushed out of shape like this, so it pulls back and passes the wave on. A liquid does not: its layers simply slide past one another. A liquid does resist being squashed, though, so it can carry the squeezes and stretches of a P-wave.
A third group, surface waves, travels along the ground after the S-waves arrive. These often cause the worst shaking, but they go beyond school courses.
How does a seismometer record the waves?
A simple seismometer has a heavy mass hanging from a spring or a frame. When the ground shakes, the frame moves with it. The heavy mass tends to stay still, because of its inertia. The movement of the frame relative to the mass is recorded as a trace called a seismogram. Modern seismometers measure this movement electronically, often in three directions: up and down, north to south, and east to west.
On a seismogram, the line is calm until the first P-waves arrive and make small, quick wiggles. A little later, the larger S-waves arrive. Reading the times of these two arrivals is the first step in locating an earthquake.
Japan uses this head start for its earthquake warnings. Seismometers near the source detect the fast P-waves and send an alert. It can reach places further away seconds before the stronger shaking arrives, enough time to stop trains or take cover.
How far away was the earthquake?
Both waves set off at the same moment, but the P-wave travels faster. Every extra kilometre adds a little more to the gap between them. For these examples, take rounded speeds of 7.0 km/s for P-waves and 4.0 km/s for S-waves. These are typical values chosen to make the arithmetic clear. Real speeds depend on the rock and the depth.
Use the speed equation in the form:
Worked example 1: arrival times at one station
An earthquake happens in the mountains of northern Pakistan. A seismometer is 420 km away. Find when each wave arrives, and the time gap between them.
P-wave: s
S-wave: s
Gap: s
Answer: the P-waves arrive 60 s after the earthquake and the S-waves 105 s after it, so the station records a gap of 45 s.
Worked example 2: working backwards from a seismogram
A station in Chile records the first P-waves at 10:15:20 and the first S-waves at 10:15:56. Using the same speeds, how far away was the earthquake, and when did it happen?
Gap: from 10:15:20 to 10:15:56 is 36 s
Extra time per kilometre: the S-wave takes s per km and the P-wave takes s per km. So each kilometre adds s to the gap, about 0.107 s.
Distance: km
P-wave travel time: s
Time of the earthquake: 48 s before 10:15:20, which is 10:14:32
Check: the S-wave takes s, and 10:14:32 plus 84 s is 10:15:56.
Answer: 336 km away, or about 340 km, at 10:14:32.
One station gives only a distance, so the earthquake lies somewhere on a circle of that radius. With readings from three stations, the three circles cross at one point: the epicentre, the place on the surface directly above the earthquake.
What is the S-wave shadow zone?
After a large earthquake, stations all over the world record the waves. Close to the earthquake, both P-waves and S-waves arrive. But at stations more than about 105° round the Earth from the epicentre, more than roughly 11 700 km away along the surface, no S-waves arrive directly. This region is the S-wave shadow zone.
To reach those stations, the waves would have to cross the Earth's core. Since S-waves cannot cross a liquid, something deep inside must be liquid. That layer is the outer core, made mostly of molten iron and nickel. The size of the shadow zone shows how big the core is: it begins about 2900 km below the surface.
P-waves do pass through the outer core, but they slow down as they enter the liquid. That sudden change of speed makes them refract, bending at the boundary. So there is also a P-wave shadow zone, roughly between 105° and 140° from the epicentre, where direct P-waves are missing. Beyond it, P-waves that have crossed the core arrive again.
These angles and depths are approximate, measured values. Scientists worked them out step by step:
- By the 1910s, seismologists had found that the core boundary lies about 2900 km down.
- In 1936, the Danish seismologist Inge Lehmann noticed faint P-waves arriving inside the shadow zone. Lehmann explained them with a smaller inner core inside the outer one. The inner core is now known to be solid.
No one has ever drilled deeper than about 12 km. Almost everything we know about the deep Earth comes from waves like these.
How can you explore the two kinds of wave?
In our transverse and longitudinal waves simulation, start the source with Play, then press Track to follow one particle. Under Type of wave, choose Longitudinal: the particle moves back and forth along the chain, like rock in a P-wave. Switch to Transverse and it moves at right angles to the chain, like rock in an S-wave. The Which kind of wave? box lists both kinds of seismic wave. A separate seismic waves simulation is planned.
Common mistakes
- Mixing up the letters. P-waves are primary: first to arrive, and longitudinal. S-waves are secondary: second, and transverse.
- Saying P-waves cannot cross liquids. They can, at a different speed. Only S-waves are stopped.
- Thinking the shadow zone means the whole core is liquid. The S-wave evidence shows the outer core is liquid. The inner core is solid.
- Using the arrival time of one wave as the travel time. You need to know when the earthquake happened, or use the gap between the two waves.
- Forgetting that one station gives only a distance. Three stations are needed to pin down the epicentre.
Key points
- P-waves are longitudinal and faster, and they cross both solids and liquids.
- S-waves are transverse, slower and cannot travel through liquids.
- A seismometer records P-waves first and S-waves later. The gap between them grows with distance.
- The S-wave shadow zone shows that the Earth's outer core is liquid, and its size shows how big the core is.
- P-waves refract at the core boundary, which gives a P-wave shadow zone too.