Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2025 Paper 2 Foundation (8463/2F)

Set by AQA for AQA GCSE Physics, June 2025: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2025
Paper
Paper 2 Foundation
Code
8463/2F
Tier
Foundation
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.An astronaut and spacesuit have a total mass of 150 kg. Gravitational field strength on the Moon = 1.6 N/kg.

    From the topic: Gravity, weight and mass

    1. (a)Calculate the weight of the astronaut and spacesuit on the Moon.

      2 marks
      Show the answer

      Answer: W = 150 × 1.6 = 240 N

      Marking points

      • W = 150 × 1.6
      • W = 240 N
    2. (b)On Earth the astronaut and spacesuit weigh far more, although their mass is the same. Explain why.

      2 marks
      Show the answer

      Answer: Weight depends on the gravitational field strength where the object is. The field strength at the surface of the Earth (9.8 N/kg) is much bigger than at the surface of the Moon, so W = mg gives a bigger weight for the same mass.

      Marking points

      • Weight depends on the gravitational field strength at the place where the object is.
      • g on Earth is greater than g on the Moon, so the same mass has a greater weight.
    3. (c)The astronaut lifts a rock that weighs 32 N on the Moon. Calculate the mass of the rock.

      2 marks
      Show the answer

      Answer: m = W ÷ g = 32 ÷ 1.6 = 20 kg

      Marking points

      • m = 32 ÷ 1.6
      • m = 20 kg
    4. (d)Weight is a vector quantity, but mass is a scalar quantity. Explain the difference.

      2 marks
      Show the answer

      Answer: A vector has a size and a direction: weight acts downwards, towards the centre of the Moon. A scalar, such as mass, has a size only.

      Marking points

      • A vector has magnitude and direction (weight acts downwards, towards the centre of the Moon).
      • A scalar has magnitude only.
  2. 2.A uniform metre rule is balanced on a pivot at its 50 cm mark, with its 0 cm end on the left. A 4.0 N weight hangs from the 10 cm mark and a 2.0 N weight hangs from the 30 cm mark. A third weight, W, hangs from the 75 cm mark so that the rule stays balanced.

    From the topic: Moments, levers and gears Physics only

    1. (a)Calculate the sum of the anticlockwise moments about the pivot.

      3 marks
      Show the answer

      Answer: 4.0 × 0.40 = 1.6 N m; 2.0 × 0.20 = 0.40 N m; total = 2.0 N m

      Marking points

      • Distances from the pivot of 0.40 m and 0.20 m used.
      • Moments of 1.6 N m and 0.40 N m.
      • Total anticlockwise moment = 2.0 N m
    2. (b)Use the principle of moments to calculate the weight W.

      3 marks
      Show the answer

      Answer: Clockwise moment = anticlockwise moment, so W × 0.25 = 2.0 and W = 8.0 N.

      Marking points

      • W × 0.25 = 2.0 (total clockwise moment = total anticlockwise moment).
      • W = 2.0 ÷ 0.25
      • W = 8.0 N
    3. (c)Explain why the weight of the metre rule was not included in your calculations.

      2 marks
      Show the answer

      Answer: The rule is uniform, so its weight acts at its centre of mass, the 50 cm mark. That is at the pivot, so the perpendicular distance is zero and the weight has no moment.

      Marking points

      • The weight of the rule acts at its centre of mass (the 50 cm mark), which is at the pivot.
      • So its perpendicular distance from the pivot is zero and its moment is zero.
  3. 3.A car is travelling at 30 m/s on a motorway. The driver brakes and the car decelerates uniformly at 7.5 m/s² until it stops.

    From the topic: Acceleration

    1. (a)Calculate the time taken for the car to stop.

      2 marks
      Show the answer

      Answer: t = Δv ÷ a = 30 ÷ 7.5 = 4.0 s

      Marking points

      • t = 30 ÷ 7.5
      • t = 4.0 s
    2. (b)Calculate the braking distance of the car. Use the Physics Equations Sheet.

      3 marks
      Show the answer

      Answer: 0² − 30² = 2 × (−7.5) × s, so s = 900 ÷ 15 = 60 m

      Marking points

      • 0 − 30² = 2 × (−7.5) × s (or s = 30² ÷ (2 × 7.5))
      • s = 900 ÷ 15
      • s = 60 m
  4. 4.The velocity–time graph for a sprinter is a curve. It starts steep and becomes less steep as the race goes on.

    From the topic: Velocity–time graphs

    1. (a)What does the gradient of a velocity–time graph represent?

      1 mark
      Show the answer

      Answer: Acceleration.

      Marking points

      • Acceleration.
    2. (b)Explain what the shape of the graph shows about the sprinter's acceleration.

      2 marks
      Show the answer

      Answer: The gradient decreases as the line becomes less steep. The gradient is the acceleration, so the acceleration is decreasing (although the sprinter is still speeding up).

      Marking points

      • The gradient is getting smaller.
      • So the acceleration is decreasing.
    3. (c)Higher tier. Describe how the distance run in the first 4 s could be found from the graph.

      3 marks
      Show the answer

      Answer: Count the squares under the curve between 0 and 4 s, counting part-squares of about half or more. Work out the distance one square represents (width × height). Multiply the number of squares by this distance.

      Marking points

      • Count the squares under the curve from 0 to 4 s.
      • Find the distance represented by one square (its time width × velocity height).
      • Multiply the number of squares by the distance per square.
  5. 5.Required practical 9 (physics only). A student wants to compare how a plane mirror, a sheet of white paper and a piece of matt black card reflect light. The student has a ray box with a single-slit cover, a protractor, a ruler, a sharp pencil and some plain paper.

    From the topic: Reflection of waves Physics only

    1. (a)Describe how the student could make this comparison.

      6 marks
      Show the answer

      Answer: Draw a straight line on a sheet of plain paper and stand the mirror along it. Draw a normal at 90° to the line. In a darkened room, aim a narrow ray from the ray box at the point where the normal meets the mirror. Mark the incident and reflected rays with crosses, remove the mirror and join the crosses with a ruler. Measure the angles of incidence and reflection from the normal with the protractor, and repeat for several angles. Put the white paper and then the black card where the mirror was, keeping the angle of incidence the same, and compare how bright and how sharp the reflected ray is each time. (This part is marked in levels, with the whole answer weighed up before a level is chosen. Level 3, 5–6 marks: a full method in a sensible order that gives a fair comparison, with angles taken from the normal and the same angle of incidence for every surface. Level 2, 3–4 marks: a method that mostly works but leaves out a key step or jumps about. Level 1, 1–2 marks: one or two relevant ideas, such as shining a ray at the mirror, without a method that could be followed. No relevant content: 0 marks.)

      Marking points

      • Straight line drawn on plain paper with the surface placed along it.
      • Normal drawn at 90° to the surface.
      • Narrow ray from the ray box aimed at the point where the normal meets the surface.
      • Incident and reflected rays marked with crosses and joined with a ruler.
      • Angles of incidence and reflection measured from the normal with a protractor, for several angles.
      • Other surfaces placed in the same position with the same angle of incidence, and the brightness or sharpness of the reflected ray compared.
    2. (b)Give one reason why the investigation is carried out in a darkened room.

      1 mark
      Show the answer

      Answer: So that the narrow ray and its reflection are easy to see and mark.

      Marking points

      • Rays are easier to see (so their positions can be marked accurately).
    3. (c)The mirror gives one sharp reflected ray, but the white paper gives only a dim, spread-out patch of light. Name the type of reflection from the paper and explain why it happens.

      2 marks
      Show the answer

      Answer: Diffuse reflection. The paper's surface is rough, so different parts of it face different ways and scatter the light in many directions.

      Marking points

      • Diffuse reflection.
      • Rough surface scatters the light in many directions.
  6. 6.This question is about how objects emit and absorb radiation.

    From the topic: Black body radiation Physics only

    1. (a)Describe what is meant by a perfect black body.

      2 marks
      Show the answer

      Answer: An ideal object that takes in all radiation arriving at its surface, whatever the wavelength. None of the radiation is reflected and none is transmitted.

      Marking points

      • Absorbs all of the radiation reaching it.
      • Reflects none and transmits none of it.
    2. (b)Explain why a perfect black body emits radiation better than any other object at the same temperature.

      2 marks
      Show the answer

      Answer: A good absorber of radiation is also a good emitter. A perfect black body absorbs all radiation, so it is the best absorber, which makes it the best emitter too.

      Marking points

      • Good absorbers are also good emitters.
      • It is the best possible absorber (absorbs all radiation), so it must be the best emitter.
    3. (c)A block of ice at −5 °C sits in a freezer. A student says: 'The ice gives out no infrared because it is so cold.' Explain why the student is wrong.

      2 marks
      Show the answer

      Answer: All objects emit infrared, whatever their temperature, so the ice does emit some. It emits less each second than it would if it were warmer.

      Marking points

      • All objects emit infrared at any temperature, so the ice does emit.
      • It just emits less (per second) than a hotter object would.
  7. 7.A student has two bar magnets with their poles labelled N and S. The student slides the N pole of one magnet towards the N pole of the other along a smooth table.

    From the topic: Permanent and induced magnets

    1. (a)Describe what happens to the second magnet as the poles get close.

      1 mark
      Show the answer

      Answer: It is pushed away (the magnets repel).

      Marking points

      • The second magnet moves away / the magnets repel.
    2. (b)The second magnet is now reversed, so the moving N pole approaches its S pole. Describe the force between the magnets now.

      1 mark
      Show the answer

      Answer: The magnets attract, because unlike poles pull towards each other.

      Marking points

      • Attraction (unlike poles attract).
    3. (c)The forces between the magnets are non-contact forces. Explain what this means, and give one other example of a non-contact force.

      2 marks
      Show the answer

      Answer: The magnets exert forces on each other without touching, across a gap. Another example is gravitational force (or electrostatic force).

      Marking points

      • The force acts between objects that are not touching / acts across a gap.
      • Gravitational force or electrostatic force named.
    4. (d)State where on a bar magnet the magnetic forces are strongest.

      1 mark
      Show the answer

      Answer: At the poles, near the ends of the magnet.

      Marking points

      • At the poles (near each end).