AQA · GCSE AQA
AQA GCSE Physics June 2025 Paper 1 Higher (8463/1H)
Set by AQA for AQA GCSE Physics, June 2025: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- June 2025
- Paper
- Paper 1 Higher
- Code
- 8463/1H
- Tier
- Higher
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens the page on AQA’s website that lists it)
- Mark scheme(opens the page on AQA’s website that lists it)
- Examiner report(opens the page on AQA’s website that lists it)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Energy
Energy stores and systems · Kinetic and potential energy · Specific heat capacity · Power · Conservation and dissipation of energy · Efficiency · Energy resources
Energy stores and transfersEnergy skate trackSpecific heat capacityPower and efficiency
- Electricity
Circuit symbols · Electrical charge and current · Current, resistance and potential difference · I–V characteristics · LDRs and thermistors · Series and parallel circuits · Mains electricity · Electrical power · Energy transfers in appliances · The National Grid · Static electricity and electric fields
Circuit builderCharge, current, energy and powerResistance of a wireI–V characteristics
- Particle model of matter
Density · Changes of state · Internal energy · Specific latent heat · Particle motion in gases · Pressure in gases
Measuring densityParticle model and states of matterLatent heat and heating curvesGas laws and particles
- Atomic structure
Structure of the atom · Mass number and isotopes · Development of the atomic model · Radioactive decay and nuclear radiation · Nuclear equations · Half-life · Contamination and irradiation · Uses and hazards of radiation · Nuclear fission and fusion
Isotopes and atom builderAtomic models and Rutherford scatteringAlpha, beta and gamma radiationNuclear equations
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A council must choose between a gas-fired power station and a wind farm to supply a town. Both would have the same maximum power output.
From the topic: Energy resources
(a)Compare the gas-fired power station and the wind farm as ways of generating electricity for the town. Refer to reliability and to the environment.
6 marksShow the answerHide the answer
Answer: Natural gas is non-renewable and will eventually run out, but wind is renewable. The gas station can generate at any time, day or night, in any weather, so it is reliable, and it can be started quickly when demand rises. The wind farm's output depends on the wind speed: on a calm day it gives nothing, and in very strong winds the turbines are shut down, so it is unreliable. Burning gas releases carbon dioxide, which adds to global warming, and methane can leak from gas wells and pipes. The turbines release no carbon dioxide while generating, but some people find them noisy or ugly, and they can kill birds and bats. (Level-of-response marking: marks come from the overall quality of the answer rather than from ticking separate points. Level 3, 5–6 marks: clear comparisons of both options covering reliability and the environment, as here. Level 2, 3–4 marks: some comparison, or both aspects described without comparing the two options. Level 1, 1–2 marks: simple facts about one option or one aspect only.)
Marking points
- Gas is non-renewable (will run out); wind is renewable.
- The gas station can generate whenever it is needed (day or night, any weather).
- Gas can be started up quickly to meet a rise in demand.
- Wind output depends on the wind speed: none when calm (turbines stopped in storms), so it is unreliable.
- Burning gas releases carbon dioxide, which adds to global warming; the wind farm releases no carbon dioxide while generating.
- Wind turbines: noise / spoil the view / harm birds and bats (allow for gas: methane leaks or damage from extracting the gas).
2.This invented data shows the percentage of a model country's electricity that came from each resource in three years. 2005: coal 35%, gas 40%, nuclear 20%, wind 3%, solar 2%. 2015: coal 22%, gas 40%, nuclear 20%, wind 12%, solar 6%. 2025: coal 2%, gas 36%, nuclear 15%, wind 34%, solar 13%.
From the topic: Energy resources
(a)Describe how the shares from coal and from wind changed between 2005 and 2025.
2 marksShow the answerHide the answer
Answer: The share from coal fell from 35% to 2%. The share from wind rose from 3% to 34%.
Marking points
- Coal decreased (from 35% to 2%)
- Wind increased (from 3% to 34%)
(b)Suggest two reasons for these trends.
2 marksShow the answerHide the answer
Answer: Burning coal releases a lot of carbon dioxide, so the country is cutting emissions to limit global warming. Wind turbines have become cheaper, and wind is renewable while coal will run out.
Marking points
- One reason, e.g. coal releases a lot of carbon dioxide / concern about global warming / laws or targets to cut emissions
- A second reason, e.g. wind turbines have become cheaper / wind is renewable while coal will run out / coal also causes acid rain
(c)Scientists agree that the country's gas power stations add to global warming, yet the country has not closed them. Suggest a reason why the gas power stations are still needed.
2 marksShow the answerHide the answer
Answer: Gas stations can be started quickly and run at any time, so they supply electricity when there is little wind or sunlight. Without them, supply might not match demand and there could be power cuts.
Marking points
- Gas power stations are reliable / can be started up quickly
- Needed when wind and solar output is low (to match supply to demand / avoid power cuts)
3.A student switches off a ceiling light at the wall switch before changing the bulb. The switch is correctly wired into the live wire.
From the topic: Mains electricity
(a)The wiring between the supply and the switch is still dangerous to touch. Explain why.
3 marksShow the answerHide the answer
Answer: That part of the live wire is still connected to the supply, so it is at about 230 V. A person is at about 0 V, the same as earth. Touching it would put a large p.d. across the body, so a current would flow through the body to earth: an electric shock.
Marking points
- the live wire up to the switch remains joined to the supply / stays at about 230 V
- a person is at (about) 0 V / earth potential
- so there is a p.d. across the body and a current flows through it to earth (electric shock)
(b)In another room, a light switch has been wrongly wired into the neutral wire. Explain why changing that bulb is dangerous, even with the switch off.
2 marksShow the answerHide the answer
Answer: With the switch in the neutral, the lamp holder is still connected to the live wire, so it stays at about 230 V. Touching its contacts could let a current flow through the person to earth.
Marking points
- the lamp holder is still connected to the live wire / still at about 230 V
- touching it lets a current flow through the person to earth (shock)
(c)A person touches a live wire. The potential difference across their body is 230 V and the resistance of the path through them to earth is 9200 Ω. Calculate the current through the person. Give your answer in milliamps.
3 marksShow the answerHide the answer
Answer: V = IR, so I = V ÷ R = 230 ÷ 9200 = 0.025 A = 25 mA. (9200 Ω is a model value: real body resistance varies widely, and wet skin lowers it.)
Marking points
- 230 = I × 9200 (or I = 230 ÷ 9200)
- I = 0.025 A
- 25 mA
4.A washing machine has a metal case and is connected to the mains by a three-core cable. Inside the machine, the live wire comes loose and touches the metal case.
From the topic: Mains electricity
(a)Explain what happens when a person touches the case (i) if the earth wire is connected and (ii) if the earth wire is broken. Use ideas about potential difference and current in your answer.
6 marksShow the answerHide the answer
Answer: (i) The earth wire joins the case to earth, so the case stays at (close to) 0 V and does not become live. The live wire is now connected to earth through a path of very low resistance, so a large current flows from the live wire through the case and down the earth wire. The person is also at 0 V, so there is almost no p.d. across them and no current through them. (Not required by the AQA specification, but worth credit: the large current melts the fuse or trips a circuit breaker, which cuts off the live supply.) (ii) With the earth wire broken, nothing carries current away from the case, so the machine may seem to work normally, but the case is now at about 230 V. The person is at about 0 V, so there is a p.d. of about 230 V across their body. A current flows through them to earth: an electric shock, which could be fatal. Switching the machine off may not help if the fault is on the supply side of its switch. (Level-of-response question: the whole answer is read and placed in a level, rather than points being ticked off one by one. Level 3, 5–6 marks: a clear, logical explanation of both cases that links the p.d. across the person to whether a current flows through them. Level 2, 3–4 marks: both cases described with some explanation, or one case explained fully. Level 1, 1–2 marks: simple statements, such as 'the earth wire makes it safe' or 'the person gets a shock'. 0 marks: no relevant content.)
Marking points
- Earth wire connected: the case is kept at (about) 0 V, so it does not become live.
- A large current flows from the live wire through the case and down the low-resistance earth wire.
- The person and the case are both at about 0 V, so there is almost no p.d. across the person and no current through them.
- Earth wire broken: no current flows to earth, but the case is now at about 230 V (it is live).
- The person is at about 0 V, so there is a p.d. of about 230 V across their body.
- A current flows through the person to earth: an electric shock, which could be fatal. (Also credit, beyond the specification: in (i) the large current melts the fuse or trips a circuit breaker.)
5.Changes of state happen in many everyday situations.
From the topic: Changes of state
(a)Name the change of state in each situation: (i) wet clothes drying on a washing line; (ii) droplets forming on a cold window; (iii) dry ice (solid carbon dioxide) turning straight into a gas.
3 marksShow the answerHide the answer
Answer: (i) Evaporating (ii) Condensing (iii) Sublimating
Marking points
- (i) Evaporating / evaporation
- (ii) Condensing / condensation
- (iii) Sublimating / sublimation
(b)Give two differences between boiling and evaporating.
2 marksShow the answerHide the answer
Answer: Evaporating happens only at the surface of a liquid, but boiling happens throughout it, with bubbles forming inside. Evaporating happens at temperatures below the boiling point, but boiling happens only at the boiling point.
Marking points
- Evaporating happens at the surface only; boiling happens throughout the liquid (bubbles form inside it).
- Evaporating happens below the boiling point (at any temperature); boiling happens only at the boiling point.
6.Scientists' ideas about atoms have changed over time. In the early 1900s, the plum pudding model was the accepted model of the atom.
From the topic: Development of the atomic model
(a)Describe the plum pudding model of the atom.
2 marksShow the answerHide the answer
Answer: Positive charge fills the whole atom, and negative electrons are dotted through it.
Marking points
- A ball (sphere) of positive charge filling the whole atom
- With negative electrons scattered through it (allow: embedded in it)
(b)Name the discovery that led to the plum pudding model.
1 markShow the answerHide the answer
Answer: The discovery of the electron.
Marking points
- (Discovery of) the electron
(c)Explain why this discovery showed that atoms are not the smallest particles of matter.
2 marksShow the answerHide the answer
Answer: Electrons are particles much smaller than atoms that come from inside them. So atoms must contain smaller particles and can be split into parts.
Marking points
- Electrons are (much) smaller than atoms / come from inside atoms
- So atoms have smaller parts / are not indivisible
(d)Give two differences between the plum pudding model and the nuclear model.
2 marksShow the answerHide the answer
Answer: Any two from: in the nuclear model the positive charge is concentrated in a nucleus at the centre, not spread out; nearly all the mass is in the nucleus, not spread out; most of the nuclear atom is empty space; the electrons are outside the nucleus instead of mixed through the positive charge.
Marking points
- First difference, e.g. positive charge concentrated in a central nucleus (not spread out)
- Second difference, e.g. mass concentrated in the nucleus / atom mostly empty space / electrons outside the nucleus
7.Higher tier. A laboratory sample of iodine-131 has an activity of 7200 Bq. The half-life of iodine-131 is 8 days.
From the topic: Half-life
(a)Calculate the number of half-lives in 24 days.
1 markShow the answerHide the answer
Answer: 24 ÷ 8 = 3 half-lives
Marking points
- 3
(b)Calculate the activity of the sample after 24 days.
2 marksShow the answerHide the answer
Answer: 7200 halved three times: 3600, 1800, then 900 Bq.
Marking points
- Halving three times (or 7200 × 1/8)
- 900 Bq
(c)Give the net decline in activity over the 24 days as a ratio of the final activity to the initial activity.
1 markShow the answerHide the answer
Answer: 900 : 7200 = 1 : 8
Marking points
- 1 : 8 (allow 900 : 7200, 1/8, 0.125 or 0.125 : 1)
(d)Determine how many days it takes for the activity to fall from 7200 Bq to 225 Bq.
2 marksShow the answerHide the answer
Answer: 7200 → 3600 → 1800 → 900 → 450 → 225 Bq is 5 half-lives, so the time is 5 × 8 = 40 days.
Marking points
- 5 half-lives (or 225 : 7200 = 1 : 32)
- 40 days