Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2025 Paper 2 Higher (8463/2H)

Set by AQA for AQA GCSE Physics, June 2025: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2025
Paper
Paper 2 Higher
Code
8463/2H
Tier
Higher
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A student has two thermometers. Thermometer P is a liquid-in-glass thermometer marked every 1 °C. Thermometer Q is digital and shows temperatures to 0.1 °C.

    From the topic: Accuracy, precision and errors

    1. (a)Give the resolution of thermometer Q.

      1 mark
      Show the answer

      Answer: 0.1 °C

      Marking points

      • 0.1 °C
    2. (b)Both thermometers are put into melting ice, which is at 0 °C. P reads 0 °C and Q reads 1.4 °C. Explain why Q gives less accurate readings than P even though its resolution is better.

      2 marks
      Show the answer

      Answer: Q has a systematic (zero) error: it reads 1.4 °C above the true value. Resolution is only the smallest change Q can show; it does not bring the readings closer to the true value.

      Marking points

      • Q reads 1.4 °C above the true value (a zero / systematic error)
      • Better resolution only means smaller changes can be shown; it does not make readings closer to the true value
    3. (c)Q then reads 37.9 °C in a beaker of warm water. Assume its error is the same at all temperatures. Calculate the corrected temperature.

      1 mark
      Show the answer

      Answer: 37.9 − 1.4 = 36.5 °C

      Marking points

      • 36.5 °C
  2. 2.A student hangs slotted masses, one at a time, from a calibrated newtonmeter. Results: 0.10 kg reads 1.0 N; 0.20 kg reads 2.0 N; 0.30 kg reads 2.9 N; 0.40 kg reads 3.9 N; 0.50 kg reads 4.9 N.

    From the topic: Gravity, weight and mass

    1. (a)Explain what is meant by a calibrated newtonmeter.

      1 mark
      Show the answer

      Answer: Its scale has been checked or marked using known weights, so the readings it gives are correct.

      Marking points

      • The scale has been checked or marked against known weights, so its readings are accurate.
    2. (b)Describe the relationship between weight and mass shown by the results. Use data in your answer.

      2 marks
      Show the answer

      Answer: As the mass increases, the weight increases in direct proportion. For example, doubling the mass from 0.10 kg to 0.20 kg doubles the reading from 1.0 N to 2.0 N.

      Marking points

      • As the mass increases, the weight increases.
      • In direct proportion, supported by data, e.g. doubling the mass from 0.10 kg to 0.20 kg doubles the reading from 1.0 N to 2.0 N.
    3. (c)Write the relationship between weight (W) and mass (m) using the proportionality symbol.

      1 mark
      Show the answer

      Answer: W ∝ m

      Marking points

      • W ∝ m
    4. (d)Use the result for 0.50 kg to calculate the gravitational field strength.

      2 marks
      Show the answer

      Answer: g = W ÷ m = 4.9 ÷ 0.50 = 9.8 N/kg

      Marking points

      • g = 4.9 ÷ 0.50
      • g = 9.8 N/kg
    5. (e)Another student's newtonmeter reads 0.3 N when nothing is hanging from it. Explain how this affects that student's readings and what they should do about it.

      2 marks
      Show the answer

      Answer: Every reading will be 0.3 N too high (a zero error). The student should adjust the newtonmeter to read zero before hanging any masses, or subtract 0.3 N from each reading.

      Marking points

      • Every reading is 0.3 N too large (a zero error, which is a systematic error).
      • Reset the newtonmeter to zero before use (or subtract 0.3 N from every reading).
  3. 3.A removal worker pushes a wardrobe 3.5 m across a carpeted floor at a steady speed. The worker's push is horizontal and has a size of 220 N.

    From the topic: Work done and energy transfer

    1. (a)Write down the equation that links distance, force and work done.

      1 mark
      Show the answer

      Answer: work done = force × distance (W = F s)

      Marking points

      • work done = force × distance (moved along the line of action of the force)
    2. (b)Calculate the work done by the worker.

      2 marks
      Show the answer

      Answer: W = 220 × 3.5 = 770 J

      Marking points

      • W = 220 × 3.5
      • W = 770 J
    3. (c)Describe what happens to the energy transferred by the worker as the wardrobe slides.

      2 marks
      Show the answer

      Answer: Work is done against friction between the wardrobe and the carpet. Energy goes to the thermal stores of the wardrobe and carpet, so their temperature rises slightly.

      Marking points

      • Work is done against friction (between the wardrobe and the carpet).
      • The thermal store of the wardrobe and carpet increases, so their temperature rises (energy is dissipated to the surroundings).
    4. (d)The wardrobe then jams against a wall. The worker pushes on it with a force of 300 N but it does not move. State the work done on the wardrobe. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: 0 J, because the wardrobe does not move, so the distance moved along the line of the force is zero.

      Marking points

      • 0 J
      • The wardrobe moves no distance (in the direction of the force), so W = 300 × 0.
  4. 4.A space probe is so far from any planet or star that gravitational forces on it are negligible. It drifts at 15 km/s with its engine switched off.

    From the topic: Newton's first law

    1. (a)Explain why the probe keeps moving at 15 km/s even though its engine is off.

      2 marks
      Show the answer

      Answer: There is no resistive force and no other force, so the resultant force is zero. By Newton's first law its velocity stays constant.

      Marking points

      • No (negligible) forces act, so the resultant force is zero.
      • So the velocity does not change (Newton's first law).
    2. (b)The engine is fired briefly so that its thrust acts at right angles to the probe's motion. State what happens to the probe's velocity. Give a reason.

      2 marks
      Show the answer

      Answer: The velocity changes, because the direction of motion changes. There is now a resultant force acting on the probe.

      Marking points

      • The direction of motion changes, so the velocity changes.
      • Because a resultant force now acts.
  5. 5.Higher tier, physics only. A student whistles a steady note into a microphone connected to an oscilloscope. On the screen, one complete wave covers 5.0 horizontal divisions, and each horizontal division stands for 0.10 ms.

    From the topic: Sound waves Higher tierPhysics only

    1. (a)Calculate the period of the sound wave in seconds.

      2 marks
      Show the answer

      Answer: T = 5.0 × 0.10 ms = 0.50 ms = 0.00050 s (5.0 × 10⁻⁴ s)

      Marking points

      • T = 5.0 × 0.10 = 0.50 ms
      • T = 0.00050 s (5.0 × 10⁻⁴ s)
    2. (b)Calculate the frequency of the whistle. The equation you need is on the Physics equation sheet.

      2 marks
      Show the answer

      Answer: f = 1 ÷ T = 1 ÷ 0.00050 = 2000 Hz

      Marking points

      • f = 1 ÷ 0.00050
      • f = 2000 Hz (2.0 kHz)
    3. (c)A friend says the trace shows that the air particles move up and down as the sound passes. Explain why the friend is wrong.

      2 marks
      Show the answer

      Answer: The trace is a graph of the microphone's p.d. (and so the pressure) plotted against time; it is not a picture of the wave. Sound is longitudinal: the air particles vibrate parallel to the direction the sound travels.

      Marking points

      • The trace is a graph of p.d. (or pressure) against time, so it is not a picture of the wave. (Allow: the horizontal axis is time, not distance.)
      • Sound is longitudinal: the particles vibrate parallel to the direction of travel (energy transfer).
    4. (d)Could a person with normal hearing hear this whistle? Give a reason for your answer.

      1 mark
      Show the answer

      Answer: Yes. 2000 Hz lies inside the range of normal hearing, 20 Hz to 20 kHz.

      Marking points

      • Yes, because 2000 Hz is between 20 Hz and 20 kHz (allow their value from the previous part).
  6. 6.In an alternator, a rectangular coil is turned steadily in the field between two opposite magnetic poles. The two ends of the coil are fixed to separate slip rings, and a carbon brush presses on each ring.

    From the topic: Alternators and dynamos Higher tierPhysics only

    1. (a)Explain how the alternator produces an alternating potential difference. You should refer to the position of the coil in your answer.

      6 marks
      Show the answer

      Answer: As the coil turns, its sides move through the magnetic field and cut field lines, so the coil has a potential difference induced in it (the generator effect). With the coil's plane parallel to the field, the sides cut straight across the field lines and the p.d. is at its greatest. With the coil's plane perpendicular to the field, the sides slide along the field lines, cut none, and the p.d. is zero. Half a turn later each side is travelling the opposite way through the field, so the p.d. reverses. Because each end of the coil stays on its own slip ring and brush, these reversals pass to the circuit and the output alternates, one cycle per turn. (Level-of-response marking: examiners compare the full answer with level descriptors. The top level needs each p.d. value tied to a coil position and the slip rings explained.)

      Marking points

      • The sides of the coil cut field lines as it turns, so a p.d. is induced (generator effect).
      • Greatest p.d. when the coil's plane is parallel to the field.
      • Zero p.d. with the coil's plane at 90° to the field (sides moving along the field lines).
      • Half a turn later each side moves the opposite way through the field, so the p.d. reverses.
      • Slip rings keep each end of the coil connected to the same brush, so the reversals reach the circuit.
      • The output alternates, completing one cycle every turn.
  7. 7.A communications satellite moves at a constant speed in a circular orbit around the Earth.

    From the topic: Orbital motion and satellites Physics only

    1. (a)Describe the direction of the gravitational force on the satellite.

      1 mark
      Show the answer

      Answer: Towards the centre of the Earth, which is also the centre of the orbit.

      Marking points

      • towards the centre of the Earth (the centre of the circle)
    2. (b)(Higher tier) Explain why the velocity of the satellite is changing even though its speed is constant.

      3 marks
      Show the answer

      Answer: Velocity is a vector, so turning to a new direction counts as a change of velocity. The gravitational force acts at right angles to the satellite's motion, so it changes the direction of motion but not the speed. The direction changes continuously, so the velocity changes continuously.

      Marking points

      • velocity has direction (is a vector) as well as speed
      • gravity acts at right angles (perpendicular) to the motion, so the speed is not changed
      • the direction of motion keeps changing, so the velocity changes
    3. (c)(Higher tier) A student says, "Its speed never changes, so no resultant force can be acting on it." Explain why the student is wrong.

      2 marks
      Show the answer

      Answer: The satellite's velocity is changing, so it is accelerating, and a change in velocity needs a resultant force. That resultant force is the Earth's gravitational pull on the satellite.

      Marking points

      • the velocity changes / the satellite is accelerating (towards the centre)
      • so there must be a resultant force: the Earth's gravity