Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2018 Paper 2 Higher (8463/2H)

Set by AQA for AQA GCSE Physics, June 2018: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2018
Paper
Paper 2 Higher
Code
8463/2H
Tier
Higher
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A student times how long a paper helicopter takes to fall 2.00 m. The five repeat timings are 2.14 s, 2.06 s, 2.11 s, 2.60 s and 2.09 s.

    From the topic: Accuracy, precision and errors

    1. (a)Which result is anomalous?

      1 mark
      Show the answer

      Answer: 2.60 s

      Marking points

      • 2.60 s
    2. (b)The student's notes say that the helicopter brushed against a cupboard during that drop. What should the student do with the anomalous result? Give a reason.

      2 marks
      Show the answer

      Answer: Ignore it (leave it out of the mean), or repeat that drop, because it came from a poor measurement: the fall was interrupted.

      Marking points

      • Ignore it / leave it out of the mean (allow: repeat that drop)
      • It came from a poor measurement, as the helicopter's fall was interrupted
    3. (c)Calculate the mean time. Do not include the anomalous result.

      2 marks
      Show the answer

      Answer: Mean = (2.14 + 2.06 + 2.11 + 2.09) ÷ 4 = 8.40 ÷ 4 = 2.10 s

      Marking points

      • 8.40 ÷ 4
      • 2.10 s (allow 2.1 s)
    4. (d)Calculate the uncertainty in the mean time.

      2 marks
      Show the answer

      Answer: Range = 2.14 − 2.06 = 0.08 s. Uncertainty = half the range = ± 0.04 s.

      Marking points

      • Range = 2.14 − 2.06 = 0.08 s
      • Uncertainty = ± 0.04 s
    5. (e)Suggest one change to the method that would reduce the random error caused by the student's reaction time.

      1 mark
      Show the answer

      Answer: Use light gates and a data logger (or film the fall and time it frame by frame) instead of a hand-operated stopwatch.

      Marking points

      • Light gates / a data logger / video analysis instead of a hand-held stopwatch
  2. 2.Higher tier. A crate sits on a frozen lake, where friction is small enough to ignore. Two horizontal ropes pull it: 24 N towards the east and 10 N towards the north.

    From the topic: Resultant forces

    1. (a)Draw a scale vector diagram to determine the size and direction of the resultant force on the crate.

      4 marks
      Show the answer

      Answer: Draw the 24 N and 10 N arrows tip to tail at right angles, to a stated scale. The resultant goes from the tail of the 24 N arrow to the head of the 10 N arrow. It measures 26 N, about 23° north of east.

      Marking points

      • A suitable scale chosen, with the 24 N and 10 N forces drawn to that scale and perpendicular to each other.
      • Arrows joined tip to tail, and the resultant drawn from the tail of the first arrow to the head of the second.
      • Size of resultant 26 N (accept 25 N to 27 N: our estimate of drawing error, not an AQA figure).
      • Direction about 23° north of east (accept 21° to 25°: our estimate of drawing error, not an AQA figure), measured with a protractor.
    2. (b)A third horizontal rope is attached so that the crate is in equilibrium. Give the size and direction of the pull this third rope must provide.

      2 marks
      Show the answer

      Answer: 26 N, in the opposite direction to the resultant: about 23° south of west.

      Marking points

      • 26 N (the same size as the resultant).
      • Opposite to the resultant (about 23° south of west).
  3. 3.A crane lifts a steel beam of mass 1200 kg. Gravitational field strength = 9.8 N/kg. Ignore air resistance.

    From the topic: Newton's first law

    1. (a)Calculate the weight of the beam.

      2 marks
      Show the answer

      Answer: W = m g = 1200 × 9.8 = 11 760 N

      Marking points

      • W = 1200 × 9.8
      • W = 11 760 N (accept 11 800 N)
    2. (b)The beam rises at a constant speed. State the tension in the crane's cable. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: 11 760 N, because the beam moves at a constant velocity, so the resultant force is zero and the tension equals the weight.

      Marking points

      • 11 760 N (accept 11 800 N, or equal to the weight).
      • Constant velocity, so the resultant force is zero.
    3. (c)A student says: 'The tension must be bigger than the weight, otherwise the beam could not keep going up.' Explain why the student is wrong.

      2 marks
      Show the answer

      Answer: A resultant force is only needed to change the velocity. Once the beam is rising at a steady speed, zero resultant force keeps it rising at that speed, so the tension equals the weight.

      Marking points

      • A resultant force is needed only to change velocity (speed up, slow down or change direction).
      • At a constant upward velocity the resultant force is zero, so tension equals weight.
  4. 4.Higher tier, physics only. A student whistles a steady note into a microphone connected to an oscilloscope. On the screen, one complete wave covers 5.0 horizontal divisions, and each horizontal division stands for 0.10 ms.

    From the topic: Sound waves Higher tierPhysics only

    1. (a)Calculate the period of the sound wave in seconds.

      2 marks
      Show the answer

      Answer: T = 5.0 × 0.10 ms = 0.50 ms = 0.00050 s (5.0 × 10⁻⁴ s)

      Marking points

      • T = 5.0 × 0.10 = 0.50 ms
      • T = 0.00050 s (5.0 × 10⁻⁴ s)
    2. (b)Calculate the frequency of the whistle. The equation you need is on the Physics equation sheet.

      2 marks
      Show the answer

      Answer: f = 1 ÷ T = 1 ÷ 0.00050 = 2000 Hz

      Marking points

      • f = 1 ÷ 0.00050
      • f = 2000 Hz (2.0 kHz)
    3. (c)A friend says the trace shows that the air particles move up and down as the sound passes. Explain why the friend is wrong.

      2 marks
      Show the answer

      Answer: The trace is a graph of the microphone's p.d. (and so the pressure) plotted against time; it is not a picture of the wave. Sound is longitudinal: the air particles vibrate parallel to the direction the sound travels.

      Marking points

      • The trace is a graph of p.d. (or pressure) against time, so it is not a picture of the wave. (Allow: the horizontal axis is time, not distance.)
      • Sound is longitudinal: the particles vibrate parallel to the direction of travel (energy transfer).
    4. (d)Could a person with normal hearing hear this whistle? Give a reason for your answer.

      1 mark
      Show the answer

      Answer: Yes. 2000 Hz lies inside the range of normal hearing, 20 Hz to 20 kHz.

      Marking points

      • Yes, because 2000 Hz is between 20 Hz and 20 kHz (allow their value from the previous part).
  5. 5.Television programmes reach homes in two ways: radio waves from a transmitter mast, and microwaves sent up to a satellite and back down to dishes on houses.

    From the topic: Uses and hazards of EM waves

    1. (a)Give one other use of microwaves.

      1 mark
      Show the answer

      Answer: Cooking (heating) food in a microwave oven.

      Marking points

      • Cooking or heating food.
    2. (b)Higher tier. Describe how the transmitter produces radio waves.

      2 marks
      Show the answer

      Answer: An alternating current flows in the transmitter’s aerial, so electrons surge back and forth in it. The aerial then sends out radio waves whose frequency matches that of the current.

      Marking points

      • Electrons (charges) oscillate in the circuit / an alternating current flows in the aerial.
      • Radio waves are given out at the frequency of that oscillation.
    3. (c)Higher tier. Describe what happens in a TV aerial when it absorbs the radio waves.

      2 marks
      Show the answer

      Answer: Absorbing the waves sets the electrons in the aerial oscillating, so an alternating current flows in it. This current oscillates at the frequency of the radio waves.

      Marking points

      • An alternating current is induced in the aerial / circuit.
      • Its frequency matches the frequency of the radio waves.
    4. (d)Higher tier. Suggest why microwaves are suitable for sending signals to a satellite.

      1 mark
      Show the answer

      Answer: Microwaves pass through the Earth’s atmosphere without being absorbed much, so they reach the satellite in space.

      Marking points

      • They pass through the atmosphere (with little absorption) to reach space.
  6. 6.A student hangs a bar magnet from a thread so that it can turn freely. Its poles are not labelled. The student has a second magnet with its N pole marked.

    From the topic: Permanent and induced magnets

    1. (a)The hanging magnet stops moving with one end pointing north. Give the name of this end.

      1 mark
      Show the answer

      Answer: The north-seeking pole (N pole).

      Marking points

      • North-seeking pole / N pole.
    2. (b)The student brings the marked N pole near the end of the hanging magnet that points south. Describe what the student sees. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: That end swings towards the N pole. It is an S pole, and unlike poles attract.

      Marking points

      • The end moves towards the N pole (is attracted).
      • It is an S pole and unlike poles attract.
    3. (c)Describe the differences between a permanent magnet and an induced magnet.

      3 marks
      Show the answer

      Answer: A permanent magnet is magnetic at all times, with a field of its own. An induced magnet is magnetised only while it sits inside another magnet's field. A magnet always pulls on an induced magnet, but two permanent magnets can attract or repel. Once out of the field, an induced magnet quickly loses most or all of its magnetism.

      Marking points

      • A permanent magnet has its own field all the time; an induced magnet is only magnetised while inside a field.
      • A magnet always attracts an induced magnet, but two permanent magnets can attract or repel.
      • Once out of the field, an induced magnet quickly loses most or all of its magnetism.
  7. 7.A star the same size as the Sun began as a cloud of dust and gas. It is now a main sequence star.

    From the topic: Life cycle of a star Physics only

    1. (a)Give the name for a cloud of dust and gas in space.

      1 mark
      Show the answer

      Answer: A nebula.

      Marking points

      • nebula
    2. (b)Name the force that pulled the dust and gas together.

      1 mark
      Show the answer

      Answer: Gravity (gravitational attraction).

      Marking points

      • gravity / gravitational attraction
    3. (c)Before it becomes a black dwarf, the star will pass through two more stages. Name these two stages in the correct order.

      2 marks
      Show the answer

      Answer: First a red giant, then a white dwarf.

      Marking points

      • red giant
      • white dwarf, named after the red giant
    4. (d)Explain why this star will never become a black hole.

      2 marks
      Show the answer

      Answer: It does not have enough mass. Black holes come only from stars far heavier than the Sun, whose cores collapse at the end of their lives; a star the size of the Sun ends as a white dwarf.

      Marking points

      • its mass is too small / it is not massive enough
      • only stars much more massive than the Sun become supernovae, which can leave a black hole