Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2024 Paper 2 Higher (8463/2H)

Set by AQA for AQA GCSE Physics, June 2024: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2024
Paper
Paper 2 Higher
Code
8463/2H
Tier
Higher
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.In a model crane, an electric motor turns a small gear with 12 teeth and a radius of 1.0 cm. The small gear meshes with a large gear that has 48 teeth and a radius of 4.0 cm. The large gear turns the drum that winds in the cable.

    From the topic: Moments, levers and gears Physics only

    1. (a)The small gear turns clockwise. State the direction in which the large gear turns.

      1 mark
      Show the answer

      Answer: Anticlockwise.

      Marking points

      • Anticlockwise (the opposite direction to the small gear).
    2. (b)The motor produces a moment of 0.30 N m on the small gear. Calculate the force between the teeth of the two gears.

      2 marks
      Show the answer

      Answer: F = M ÷ d = 0.30 ÷ 0.010 = 30 N

      Marking points

      • F = 0.30 ÷ 0.010 (radius changed to 0.010 m)
      • F = 30 N
    3. (c)Calculate the moment on the large gear.

      2 marks
      Show the answer

      Answer: M = 30 × 0.040 = 1.2 N m

      Marking points

      • M = 30 × 0.040
      • M = 1.2 N m
    4. (d)Explain why the moment on the large gear is bigger than the moment on the small gear.

      3 marks
      Show the answer

      Answer: Where the teeth meet, the two gears push on each other with forces of equal size. The moment on each gear is this force × its radius, and the large gear has the bigger radius, so its moment is bigger.

      Marking points

      • The forces between the teeth of the two gears are equal in size.
      • The moment on each gear is this force × its radius (perpendicular distance from its axle).
      • The large gear has a bigger radius, so the moment on it is bigger.
  2. 2.Higher tier, physics only. A rectangular pontoon of mass 1500 kg floats on the sea in a harbour. Its flat base has an area of 6.0 m², and its sides are vertical. g = 9.8 N/kg, and the harbour's sea water has a density of 1030 kg/m³.

    From the topic: Upthrust and floating Higher tierPhysics only

    1. (a)Determine the size of the upthrust on the pontoon. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: 14 700 N. The pontoon floats at rest, so the upthrust balances its weight: W = mg = 1500 × 9.8 = 14 700 N.

      Marking points

      • 14 700 N (= mg = 1500 × 9.8).
      • It floats at rest, so upthrust = weight (the forces are balanced).
    2. (b)Calculate the pressure due to the sea water on the base of the pontoon.

      2 marks
      Show the answer

      Answer: p = F ÷ A = 14 700 ÷ 6.0 = 2450 Pa

      Marking points

      • p = 14 700 ÷ 6.0 (allow their upthrust)
      • 2450 Pa
    3. (c)Calculate how far the base of the pontoon is below the surface.

      3 marks
      Show the answer

      Answer: h = p ÷ (ρg) = 2450 ÷ (1030 × 9.8) = 0.24 m

      Marking points

      • h = p ÷ (ρ × g)
      • 2450 ÷ (1030 × 9.8)
      • 0.24 m (accept 0.243 m).
    4. (d)The pontoon is towed up a river into fresh water, density 1000 kg/m³. Explain whether it floats higher or lower than it did in the sea.

      2 marks
      Show the answer

      Answer: Lower. The upthrust must still equal the same weight, so the pressure on the base must still be 2450 Pa. Fresh water is less dense, so a greater depth (0.25 m) is needed to give that pressure.

      Marking points

      • It floats lower (its base is deeper, at 0.25 m).
      • The same upthrust, and so the same pressure, is needed, but fresh water is less dense, so a greater depth is needed.
  3. 3.Higher tier. A car pulls away from traffic lights. Its distance–time graph is a curve that gets steeper. A tangent is drawn at 5.0 s. It passes through (1.0 s, 0 m) and (7.0 s, 60 m).

    From the topic: Distance–time graphs

    1. (a)Explain how the graph shows that the car is accelerating.

      2 marks
      Show the answer

      Answer: The curve gets steeper, so the gradient increases. A distance–time gradient tells you the speed, so the speed is increasing.

      Marking points

      • The gradient (steepness) increases.
      • Gradient represents speed, so the speed is increasing.
    2. (b)Determine the speed of the car at 5.0 s.

      2 marks
      Show the answer

      Answer: Gradient of tangent = (60 − 0) ÷ (7.0 − 1.0) = 60 ÷ 6.0 = 10 m/s

      Marking points

      • Gradient = 60 ÷ 6.0
      • 10 m/s
  4. 4.Higher tier, physics only. A tuning fork with a frequency of 500 Hz is struck, and the end of its handle is pressed against one end of a long steel rail. Sound travels at 5000 m/s in the rail and at 330 m/s in air.

    From the topic: Sound waves Higher tierPhysics only

    1. (a)Explain how the tuning fork produces a sound wave in the rail.

      2 marks
      Show the answer

      Answer: The vibrating fork pushes and pulls on the end of the rail, so the steel there vibrates. The vibrations are passed along the rail as a sound wave of compressions and rarefactions.

      Marking points

      • The vibrating fork pushes and pulls on the rail, making the steel vibrate.
      • The vibrations travel along the rail as a sound wave (compressions and rarefactions).
    2. (b)Calculate the wavelength of the sound in the steel rail.

      3 marks
      Show the answer

      Answer: λ = v ÷ f = 5000 ÷ 500 = 10 m

      Marking points

      • 5000 = 500 × λ
      • λ = 5000 ÷ 500
      • λ = 10 m
    3. (c)At the far end, the vibrating rail sends sound into the air. Give the frequency of this sound and calculate its wavelength in air.

      3 marks
      Show the answer

      Answer: The frequency is still 500 Hz. λ = 330 ÷ 500 = 0.66 m

      Marking points

      • Frequency = 500 Hz (unchanged).
      • λ = 330 ÷ 500
      • λ = 0.66 m
  5. 5.A hospital uses X-rays to take images of patients’ bones.

    From the topic: Uses and hazards of EM waves

    1. (a)Give one other medical use of X-rays.

      1 mark
      Show the answer

      Answer: Treating cancer (killing cancer cells with a carefully aimed dose).

      Marking points

      • Treating cancer / killing cancer cells / radiotherapy.
    2. (b)Higher tier. Explain why X-rays can be used to produce an image of a broken bone.

      2 marks
      Show the answer

      Answer: Most X-rays pass through soft tissue (skin and muscle), but bone absorbs them. So the detector behind the patient shows where the bone is, and the break appears as a gap in it.

      Marking points

      • X-rays are transmitted by (pass through) soft tissue.
      • Bone absorbs X-rays, so the bone (and the break) shows up on the detector or film.
    3. (c)X-rays are ionising. Explain why this makes them hazardous to the patient.

      2 marks
      Show the answer

      Answer: Ionising radiation can knock electrons out of atoms in body cells. Inside a cell this can change its genes (a mutation), and a mutated cell may become cancerous.

      Marking points

      • Damages cells / ionises atoms in cells / can mutate genes.
      • May lead to cancer.
    4. (d)The radiographer takes many X-ray images each day. Suggest one way the radiographer reduces their own risk.

      1 mark
      Show the answer

      Answer: Stands behind a shielded (lead) screen, or leaves the room, while the X-rays are switched on.

      Marking points

      • Stands behind a lead or shielded screen / leaves the room during exposure / wears a lead apron.
  6. 6.Television programmes reach homes in two ways: radio waves from a transmitter mast, and microwaves sent up to a satellite and back down to dishes on houses.

    From the topic: Uses and hazards of EM waves

    1. (a)Give one other use of microwaves.

      1 mark
      Show the answer

      Answer: Cooking (heating) food in a microwave oven.

      Marking points

      • Cooking or heating food.
    2. (b)Higher tier. Describe how the transmitter produces radio waves.

      2 marks
      Show the answer

      Answer: An alternating current flows in the transmitter’s aerial, so electrons surge back and forth in it. The aerial then sends out radio waves whose frequency matches that of the current.

      Marking points

      • Electrons (charges) oscillate in the circuit / an alternating current flows in the aerial.
      • Radio waves are given out at the frequency of that oscillation.
    3. (c)Higher tier. Describe what happens in a TV aerial when it absorbs the radio waves.

      2 marks
      Show the answer

      Answer: Absorbing the waves sets the electrons in the aerial oscillating, so an alternating current flows in it. This current oscillates at the frequency of the radio waves.

      Marking points

      • An alternating current is induced in the aerial / circuit.
      • Its frequency matches the frequency of the radio waves.
    4. (d)Higher tier. Suggest why microwaves are suitable for sending signals to a satellite.

      1 mark
      Show the answer

      Answer: Microwaves pass through the Earth’s atmosphere without being absorbed much, so they reach the satellite in space.

      Marking points

      • They pass through the atmosphere (with little absorption) to reach space.
  7. 7.A diagram shows the field lines around a bar magnet. Point P is just beyond the N pole, where the lines are very close together. Point Q is a long way from the magnet, where the lines are far apart.

    From the topic: Magnetic fields

    1. (a)At which point is the magnetic field stronger? Give a reason for your answer.

      2 marks
      Show the answer

      Answer: P. The field lines are closer together there.

      Marking points

      • P
      • The field lines are closer together at P (it is close to a pole).
    2. (b)State which way the field points at P.

      1 mark
      Show the answer

      Answer: Away from the N pole of the magnet.

      Marking points

      • Away from the magnet / away from the N pole.
    3. (c)Describe what is meant by the field's direction at P.

      1 mark
      Show the answer

      Answer: It is the way a north pole placed at P would be pushed.

      Marking points

      • The direction a north pole at P would be pushed (the direction of the force on it).
    4. (d)Suggest why the field lines on the diagram never cross each other.

      1 mark
      Show the answer

      Answer: A compass at any place can line up in only one direction. Crossing lines would mean two directions at the same place.

      Marking points

      • The field at any place has a single direction (crossing lines would give two).