AQA · GCSE AQA
AQA GCSE Physics June 2019 Paper 2 Higher (8463/2H)
Set by AQA for AQA GCSE Physics, June 2019: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- June 2019
- Paper
- Paper 2 Higher
- Code
- 8463/2H
- Tier
- Higher
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner report(opens AQA’s website)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Forces
Scalar and vector quantities · Contact and non-contact forces · Gravity, weight and mass · Resultant forces · Work done and energy transfer · Forces and elasticity · Moments, levers and gears · Pressure in fluids · Pressure and depth in a liquid (Higher) · Upthrust and floating (Higher) · Atmospheric pressure
Adding and resolving vectorsDistance and displacementFree-body diagrams and resultant forceStatic and kinetic friction
- Forces and motion
Distance and displacement · Speed and velocity · Distance–time graphs · Acceleration · Velocity–time graphs · Free fall and terminal velocity · Newton's first law · Newton's second law · Newton's third law · Stopping distance and reaction time · Momentum and conservation of momentum (Higher) · Changes in momentum (Higher)
Distance and displacementMotion graphsCircular motionSUVAT equations of motion
- Waves
Transverse and longitudinal waves · Properties of waves · Reflection of waves · Sound waves (Higher) · Ultrasound and seismic waves (Higher)
Transverse and longitudinal wavesRipple tankReflection in a plane mirrorSound waves and the oscilloscope
- Electromagnetic waves
Electromagnetic spectrum · Refraction · Infrared radiation and surfaces · Uses and hazards of EM waves · Lenses · Visible light and colour · Black body radiation
Electromagnetic spectrumRefraction and Snell's lawRipple tankConduction, convection and radiation
- Magnetism and electromagnetism
Permanent and induced magnets · Magnetic fields · Electromagnetism and solenoids · Fleming's left-hand rule (Higher) · Electric motors (Higher) · Loudspeakers and microphones (Higher) · Induced potential (generator effect) (Higher) · Alternators and dynamos (Higher) · Transformers (Higher)
Magnetic field of a bar magnetMagnetic field around a wire and solenoidThe motor effectElectromagnetic induction
- Space physics
Our solar system · Life cycle of a star · Orbital motion and satellites · Red-shift and the Big Bang
Life cycle of starsOrbits and gravityRed-shift and the expanding universe
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
8 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A student hangs slotted masses, one at a time, from a calibrated newtonmeter. Results: 0.10 kg reads 1.0 N; 0.20 kg reads 2.0 N; 0.30 kg reads 2.9 N; 0.40 kg reads 3.9 N; 0.50 kg reads 4.9 N.
From the topic: Gravity, weight and mass
(a)Explain what is meant by a calibrated newtonmeter.
1 markShow the answerHide the answer
Answer: Its scale has been checked or marked using known weights, so the readings it gives are correct.
Marking points
- The scale has been checked or marked against known weights, so its readings are accurate.
(b)Describe the relationship between weight and mass shown by the results. Use data in your answer.
2 marksShow the answerHide the answer
Answer: As the mass increases, the weight increases in direct proportion. For example, doubling the mass from 0.10 kg to 0.20 kg doubles the reading from 1.0 N to 2.0 N.
Marking points
- As the mass increases, the weight increases.
- In direct proportion, supported by data, e.g. doubling the mass from 0.10 kg to 0.20 kg doubles the reading from 1.0 N to 2.0 N.
(c)Write the relationship between weight (W) and mass (m) using the proportionality symbol.
1 markShow the answerHide the answer
Answer: W ∝ m
Marking points
- W ∝ m
(d)Use the result for 0.50 kg to calculate the gravitational field strength.
2 marksShow the answerHide the answer
Answer: g = W ÷ m = 4.9 ÷ 0.50 = 9.8 N/kg
Marking points
- g = 4.9 ÷ 0.50
- g = 9.8 N/kg
(e)Another student's newtonmeter reads 0.3 N when nothing is hanging from it. Explain how this affects that student's readings and what they should do about it.
2 marksShow the answerHide the answer
Answer: Every reading will be 0.3 N too high (a zero error). The student should adjust the newtonmeter to read zero before hanging any masses, or subtract 0.3 N from each reading.
Marking points
- Every reading is 0.3 N too large (a zero error, which is a systematic error).
- Reset the newtonmeter to zero before use (or subtract 0.3 N from every reading).
2.Higher tier, physics only. A student measures the pressure due to a liquid at several depths and plots pressure against depth. The best-fit line is straight and starts at the origin. At a depth of 0.40 m the pressure due to the liquid is 4900 Pa. g = 9.8 N/kg.
From the topic: Pressure and depth in a liquid Higher tierPhysics only
(a)Describe the relationship between pressure and depth shown by the graph.
1 markShow the answerHide the answer
Answer: The pressure is directly proportional to the depth.
Marking points
- Directly proportional (a straight line through the origin).
(b)Calculate the density of the liquid.
3 marksShow the answerHide the answer
Answer: ρ = p ÷ (hg) = 4900 ÷ (0.40 × 9.8) = 1250 kg/m³
Marking points
- ρ = p ÷ (h × g)
- 4900 ÷ (0.40 × 9.8), which is 4900 ÷ 3.92
- 1250 kg/m³
(c)Predict the pressure due to the liquid at a depth of 1.20 m.
1 markShow the answerHide the answer
Answer: Three times the depth gives three times the pressure: 3 × 4900 = 14 700 Pa.
Marking points
- 14 700 Pa
(d)The student repeats the experiment with water, density 1000 kg/m³. Describe how the new line compares with the first one.
2 marksShow the answerHide the answer
Answer: It is still a straight line through the origin, but it is less steep. Water is less dense, and the gradient of the line is ρg.
Marking points
- Still a straight line through the origin.
- Less steep (smaller gradient), because water is less dense (gradient = ρg).
3.A lifeguard runs along a straight beach. The lifeguard runs 80 m east to a flag, then turns and runs 30 m west. The run takes 44 s in total. Take east as the positive direction.
From the topic: Distance and displacement
(a)Calculate the total distance the lifeguard runs.
1 markShow the answerHide the answer
Answer: 80 + 30 = 110 m
Marking points
- 110 m
(b)Determine the displacement of the lifeguard at the end of the run.
2 marksShow the answerHide the answer
Answer: (+80) + (−30) = +50 m, which is 50 m east of the start.
Marking points
- 50 m (or +50 m)
- East of the starting point.
(c)Calculate the average speed of the lifeguard.
2 marksShow the answerHide the answer
Answer: Average speed = 110 ÷ 44 = 2.5 m/s
Marking points
- Average speed = 110 ÷ 44
- 2.5 m/s
(d)The lifeguard then runs a further 70 m west. Determine the new displacement from the starting point.
2 marksShow the answerHide the answer
Answer: +50 − 70 = −20 m, so the lifeguard is 20 m west of the start.
Marking points
- 20 m (or −20 m)
- West of the starting point.
4.A student investigates paper cake cases falling through air. The student drops one case from a fixed height, then two cases stacked inside each other, then three, and so on. Each stack has the same shape and size, and each one reaches terminal velocity before it lands.
From the topic: Free fall and terminal velocity
(a)Name the independent variable in this investigation.
1 markShow the answerHide the answer
Answer: The number of cake cases (the weight of the stack).
Marking points
- Number of cake cases (accept weight or mass of the stack).
(b)Physics only. Explain why a stack of four cases has a higher terminal velocity than a single case.
3 marksShow the answerHide the answer
Answer: Four cases have a bigger weight but the same shape. Air resistance increases with speed, so the stack has to fall faster before the air resistance becomes equal to its larger weight.
Marking points
- The stack has a greater weight (with the same shape and area).
- Air resistance increases as speed increases.
- A higher speed is needed before air resistance equals the weight.
(c)Suggest one way the student could reduce the effect of random errors when timing each fall.
1 markShow the answerHide the answer
Answer: Repeat each drop several times and calculate a mean time (or film the fall beside a scale and time it from the video frames, or drop from a greater height).
Marking points
- Repeat and calculate a mean, or time the fall from a video recording, or drop from a greater height.
5.A loudspeaker on a stage plays a steady note. The sound travels through the air to an audience 20 m away.
From the topic: Transverse and longitudinal waves
(a)What type of wave is sound in air?
1 markShow the answerHide the answer
Answer: Longitudinal.
Marking points
- Longitudinal.
(b)Describe how the air particles between the stage and the audience move as the sound passes through them.
2 marksShow the answerHide the answer
Answer: Each air particle oscillates backwards and forwards about a fixed position, with no overall movement towards the audience. The oscillations are parallel to the direction in which the sound transfers energy.
Marking points
- Particles oscillate (vibrate) about a fixed position and do not move overall towards the audience.
- The oscillations are parallel to the direction of energy transfer (the direction the sound travels).
(c)The sound wave contains compressions and rarefactions. Describe the difference between a compression and a rarefaction.
2 marksShow the answerHide the answer
Answer: In a compression the air particles are closer together than normal, so the pressure is a little higher. In a rarefaction they are further apart than normal, so the pressure is a little lower.
Marking points
- Compression: particles closer together than normal (higher pressure).
- Rarefaction: particles further apart than normal (lower pressure).
(d)Sound travels through the air at 330 m/s. Calculate the time the sound takes to reach the audience.
3 marksShow the answerHide the answer
Answer: t = s ÷ v = 20 ÷ 330 = 0.061 s
Marking points
- t = s ÷ v (s = v t rearranged)
- t = 20 ÷ 330
- t = 0.061 s (accept 0.06 s)
6.Physics only. A student compares how much a ray of light bends when it enters three transparent materials: glass, Perspex and water held in a thin clear plastic box.
From the topic: Refraction
(a)Describe a method the student could use to compare how much each substance refracts light.
5 marksShow the answerHide the answer
Answer: Place each block on paper and draw round it. Draw a normal where the ray will enter. Aim a thin beam from a ray box at a fixed angle of incidence, such as 40°. Mark the ray's path with crosses, remove the block and join the crosses through the block. Measure the angle of refraction from the normal with a protractor and compare the values for each substance.
Marking points
- Draw round the block on paper and draw a normal.
- Shine a narrow ray from a ray box into the block.
- Use the same angle of incidence for every substance.
- Mark the ray path with crosses and join them after removing the block.
- Measure the angle of refraction from the normal with a protractor and compare.
(b)Give one safety precaution for this investigation.
1 markShow the answerHide the answer
Answer: Do not touch the ray box bulb or casing, because it gets hot.
Marking points
- Ray box gets hot, so let it cool / do not touch it (or keep the darkened room clear of trip hazards).
7.Fleming's left-hand rule shows how three quantities are arranged when a current-carrying wire is in a magnetic field.
From the topic: Fleming's left-hand rule Higher tier
(a)State what the first finger and the second finger each represent.
2 marksShow the answerHide the answer
Answer: The first finger represents the magnetic field (from N to S). The second finger represents the conventional current.
Marking points
- First finger: the (direction of the) magnetic field.
- Second finger: the (direction of the conventional) current.
(b)Describe how the directions of the force, the field and the current are arranged.
1 markShow the answerHide the answer
Answer: No two of them are parallel: force, field and current are all at right angles to one another.
Marking points
- All three at right angles (90°) to one another.
(c)Name three quantities that determine how big the force on the wire is.
3 marksShow the answerHide the answer
Answer: The magnetic flux density (strength of the field), the size of the current, and the length of wire inside the field.
Marking points
- Magnetic flux density (strength of the magnetic field).
- Current in the wire.
- Length of the wire in the field.
8.The student now connects the coil to a resistor, so that the circuit is complete. It feels harder to push the N pole of the magnet into the coil than it did when the coil was not connected to anything.
From the topic: Induced potential (generator effect) Higher tierPhysics only
(a)Explain why it is harder to push the magnet in when the circuit is complete.
4 marksShow the answerHide the answer
Answer: The moving magnet induces a p.d. across the coil, and because the circuit is complete, a current flows. The induced current sets up its own magnetic field, which opposes the change that caused it. The end of the coil facing the magnet becomes an N pole, so it repels the approaching N pole of the magnet.
Marking points
- A p.d. is induced, and the complete circuit lets a current flow.
- The induced current produces its own magnetic field.
- This field opposes the change (the movement of the magnet).
- An N pole forms at the coil's near end and repels the magnet's N pole.
(b)Explain why there is no push back from the coil when it is not connected to anything.
2 marksShow the answerHide the answer
Answer: A p.d. is still induced, but without a complete circuit no current flows. With no current, the coil produces no magnetic field to oppose the magnet.
Marking points
- No complete circuit, so no induced current.
- No current means no magnetic field from the coil to oppose the magnet.