Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2023 Paper 2 Higher (8463/2H)

Set by AQA for AQA GCSE Physics, June 2023: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2023
Paper
Paper 2 Higher
Code
8463/2H
Tier
Higher
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

8 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A student wants to find the density of a small steel ball bearing. Its diameter is roughly 6 mm. The student can use a 30 cm ruler marked in millimetres, a set of Vernier callipers or a micrometer.

    From the topic: Measuring instruments

    1. (a)Give the resolution of the ruler.

      1 mark
      Show the answer

      Answer: 1 mm

      Marking points

      • 1 mm (accept 0.1 cm)
    2. (b)Which instrument should the student use to measure the diameter of the ball bearing? Give a reason for your answer.

      2 marks
      Show the answer

      Answer: The micrometer, because it has the smallest resolution (0.01 mm), which is very small compared with a 6 mm diameter.

      Marking points

      • Micrometer (allow Vernier callipers).
      • Its resolution is small compared with the 6 mm diameter (micrometer 0.01 mm, the smallest; callipers 0.1 mm), whereas the ruler's 1 mm is a large fraction of 6 mm.
    3. (c)The student measures the diameter five times. The readings are 6.32 mm, 6.35 mm, 6.33 mm, 6.36 mm and 6.34 mm. Calculate the mean diameter.

      2 marks
      Show the answer

      Answer: mean = (6.32 + 6.35 + 6.33 + 6.36 + 6.34) ÷ 5 = 31.70 ÷ 5 = 6.34 mm

      Marking points

      • Sum of the readings ÷ 5 (31.70 ÷ 5)
      • 6.34 mm
    4. (d)Use the readings to estimate the uncertainty in the mean diameter.

      2 marks
      Show the answer

      Answer: Range = 6.36 − 6.32 = 0.04 mm. Uncertainty = half the range = ± 0.02 mm.

      Marking points

      • Range = 6.36 − 6.32 = 0.04 mm
      • Uncertainty = ± 0.02 mm (half the range)
  2. 2.A student represents forces as arrows on squared paper, using a scale of 1 cm to 20 N.

    From the topic: Scalar and vector quantities

    1. (a)A force of 140 N acts to the right. Calculate how long the student should draw its arrow.

      1 mark
      Show the answer

      Answer: 140 ÷ 20 = 7.0 cm

      Marking points

      • 7.0 cm
    2. (b)What does the way the arrow points tell you about the force?

      1 mark
      Show the answer

      Answer: Which way the force acts.

      Marking points

      • Which way the force acts (its direction).
    3. (c)A second force of 60 N, acting to the left, is the only other force on the object. Calculate the resultant force and give its direction.

      2 marks
      Show the answer

      Answer: 140 − 60 = 80 N, to the right.

      Marking points

      • 80 N
      • To the right (the direction of the larger force).
    4. (d)Calculate how long the arrow for the resultant force should be on the same scale.

      1 mark
      Show the answer

      Answer: 80 ÷ 20 = 4.0 cm

      Marking points

      • 4.0 cm
  3. 3.Higher tier, physics only. A student hangs a stone from a newtonmeter. The newtonmeter reads 3.6 N with the stone in air, and 2.2 N with the stone completely under water.

    From the topic: Upthrust and floating Higher tierPhysics only

    1. (a)Calculate the upthrust on the stone in the water.

      1 mark
      Show the answer

      Answer: Upthrust = 3.6 − 2.2 = 1.4 N

      Marking points

      • 1.4 N
    2. (b)Explain why there is an upthrust on the stone.

      2 marks
      Show the answer

      Answer: The bottom of the stone is deeper than its top, so the water pressure on the bottom is greater. The upward force on the bottom is therefore bigger than the downward force on the top, leaving a resultant force upwards.

      Marking points

      • The bottom of the stone is deeper, so the pressure on it is greater.
      • So the upward force on the bottom is bigger than the downward force on the top, giving a resultant upward force.
    3. (c)The student lowers the stone further, keeping it completely under the water and off the bottom. State and explain what happens to the newtonmeter reading.

      3 marks
      Show the answer

      Answer: It stays at 2.2 N. The pressures on the top and on the bottom both increase by the same amount, so the difference between them does not change, and the upthrust stays 1.4 N.

      Marking points

      • The reading stays the same (2.2 N).
      • The pressures on the top and bottom increase by the same amount.
      • So the pressure difference, and the upthrust, do not change.
    4. (d)The stone is then hung completely under salty water, which is denser than fresh water. Predict how the reading compares with 2.2 N. Give a reason.

      2 marks
      Show the answer

      Answer: It is less than 2.2 N. In a denser liquid the pressure increases more with depth, so the pressure difference between the bottom and top of the stone, and so the upthrust, are bigger.

      Marking points

      • The reading is lower than 2.2 N.
      • The denser liquid gives a bigger pressure difference, so a bigger upthrust.
  4. 4.Higher tier. A passenger is standing on a train, without holding on, as the train pulls away from a station.

    From the topic: Newton's first law

    1. (a)Give the name of the tendency of an object to stay at rest or to keep moving with a uniform velocity.

      1 mark
      Show the answer

      Answer: Inertia.

      Marking points

      • Inertia.
    2. (b)Explain why the passenger tends to fall backwards as the train speeds up.

      2 marks
      Show the answer

      Answer: The passenger's body tends to stay at rest (its inertia), while the floor and the train speed up forwards. So, compared with the train, the passenger's upper body moves backwards.

      Marking points

      • The passenger's body tends to remain at rest (keep its original velocity) because of inertia.
      • The train accelerates forwards, so the passenger moves backwards relative to the train.
    3. (c)An empty shopping trolley and a fully loaded one are pushed with the same resultant force. State which one has the greater inertia.

      1 mark
      Show the answer

      Answer: The loaded trolley, because it has the greater mass.

      Marking points

      • The loaded trolley (greater mass).
  5. 5.In a low-speed collision, a car travelling at 13 m/s is brought to rest in about 0.10 s.

    From the topic: Newton's second law

    1. (a)Estimate the deceleration of the car.

      2 marks
      Show the answer

      Answer: a ≈ 13 ÷ 0.10 ≈ 130 m/s²

      Marking points

      • a = 13 ÷ 0.10
      • a ≈ 130 m/s² (accept 100 m/s² to 150 m/s²)
    2. (b)The driver has a mass of about 70 kg. Estimate the resultant force on the driver while the car stops.

      2 marks
      Show the answer

      Answer: F ≈ 70 × 130 ≈ 9100 N, about 9000 N (about 1 × 10⁴ N).

      Marking points

      • F = 70 × 130 (allow their deceleration from the part above)
      • F ≈ 9000 N (accept 7000 N to 11 000 N)
    3. (c)Explain why large decelerations like this are dangerous for the people in the car.

      1 mark
      Show the answer

      Answer: A large deceleration means a large resultant force acts on each person, which can cause serious injury.

      Marking points

      • Large deceleration needs a large force on the body, which can cause injury.
  6. 6.Required practical 8. A student wants to find the speed of water waves in a ripple tank. The student has a ripple tank with a vibrating bar, a lamp, a large sheet of white paper, a metre rule, a stopwatch and a camera.

    From the topic: Properties of waves

    1. (a)Describe a method the student could use.

      6 marks
      Show the answer

      Answer: Pour water into the tank to a depth of about 1 cm and lay the white paper underneath. Switch on the lamp above the tank so the ripples cast shadows on the paper. Switch on the vibrating bar at a low frequency. Hold the metre rule beside the shadows and measure the length of 10 waves, or photograph the pattern with the rule in view, then divide by 10 to get the wavelength. Count the waves passing a fixed point in 10 s and divide by 10 to get the frequency. Calculate the wave speed with v = f λ. (This is a level-of-response question: the examiner judges the whole answer against level descriptors rather than ticking points. A top-level answer covers the points listed.)

      Marking points

      • Shallow water (about 1 cm) in the tank, with a lamp above so shadows of the ripples fall on white paper below.
      • Vibrating bar switched on at a frequency low enough to see and count the waves.
      • Metre rule beside the shadow pattern; length of several (e.g. 10) waves measured, or a photograph taken with the rule in view.
      • Wavelength = measured length ÷ number of waves.
      • Frequency = number of waves passing a fixed point ÷ time taken (e.g. counted over 10 s).
      • Wave speed calculated using v = f λ.
    2. (b)Explain why the student measures the length of 10 waves rather than just one.

      2 marks
      Show the answer

      Answer: One wavelength is short and the waves are moving, so a single measurement would have a large uncertainty. Measuring across 10 waves and dividing by 10 reduces the uncertainty, giving a more accurate wavelength.

      Marking points

      • A single wavelength is small and hard to measure precisely (the waves are moving).
      • Measuring 10 and dividing reduces the (percentage) uncertainty, so the value is more accurate.
    3. (c)The student finds that 10 waves cover 18 cm and that the frequency is 12 Hz. Calculate the speed of the waves in m/s.

      3 marks
      Show the answer

      Answer: λ = 18 ÷ 10 = 1.8 cm = 0.018 m. v = f λ = 12 × 0.018 = 0.216 m/s, about 0.22 m/s

      Marking points

      • λ = 0.018 m (1.8 cm converted to metres)
      • v = 12 × 0.018
      • v = 0.22 m/s (accept 0.216 m/s)
  7. 7.A narrow beam of light in air strikes one face of a rectangular glass block at an angle. It leaves through the opposite, parallel face.

    From the topic: Refraction

    1. (a)Give the name of the line drawn at 90° to the surface where the ray enters the block.

      1 mark
      Show the answer

      Answer: The normal.

      Marking points

      • The normal.
    2. (b)Describe how the direction of the ray changes as it enters the glass.

      1 mark
      Show the answer

      Answer: It bends towards the normal.

      Marking points

      • Bends towards the normal (angle of refraction is smaller than the angle of incidence).
    3. (c)Describe the path of the ray when it leaves the block through the opposite surface.

      2 marks
      Show the answer

      Answer: It bends away from the normal and leaves the block travelling parallel to the original ray, shifted sideways.

      Marking points

      • Bends away from the normal.
      • Emerging ray is parallel to the incident ray.
    4. (d)A second ray hits the block along the normal. Describe what happens to this ray.

      1 mark
      Show the answer

      Answer: It passes into the glass without changing direction.

      Marking points

      • No change in direction (it goes straight through).
  8. 8.The coil of a motor turns between the poles of a magnet. In position A, the coil's plane lies parallel to the magnetic field. In position B, the coil stands at right angles to the field.

    From the topic: Electric motors Higher tier

    1. (a)In which position is the turning effect on the coil greatest? Give a reason for your answer.

      2 marks
      Show the answer

      Answer: Position A. Here the forces on the two sides act as far from the axle as they can, so their turning effect is biggest.

      Marking points

      • Position A.
      • The forces on the sides act as far from the axle as they can (greatest perpendicular distance), so their turning effect is biggest.
    2. (b)Explain why the forces on the coil have no turning effect in position B.

      2 marks
      Show the answer

      Answer: In position B both forces act along a line that passes through the axle. Forces through the axle cannot turn the coil about it.

      Marking points

      • The forces act along a line through the axle (zero distance from it).
      • So they cannot make the coil turn (no turning effect).
    3. (c)Suggest why the coil does not stop when it reaches position B.

      1 mark
      Show the answer

      Answer: It is already moving, so it keeps going past position B.

      Marking points

      • The coil is already moving (has momentum), so it carries on past B.