AQA · GCSE AQA
AQA GCSE Physics November 2021 Paper 2 Higher (8463/2H)
Set by AQA for AQA GCSE Physics, November 2021: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- November 2021
- Paper
- Paper 2 Higher
- Code
- 8463/2H
- Tier
- Higher
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner report(opens AQA’s website)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Forces
Scalar and vector quantities · Contact and non-contact forces · Gravity, weight and mass · Resultant forces · Work done and energy transfer · Forces and elasticity · Moments, levers and gears · Pressure in fluids · Pressure and depth in a liquid (Higher) · Upthrust and floating (Higher) · Atmospheric pressure
Adding and resolving vectorsDistance and displacementFree-body diagrams and resultant forceStatic and kinetic friction
- Forces and motion
Distance and displacement · Speed and velocity · Distance–time graphs · Acceleration · Velocity–time graphs · Free fall and terminal velocity · Newton's first law · Newton's second law · Newton's third law · Stopping distance and reaction time · Momentum and conservation of momentum (Higher) · Changes in momentum (Higher)
Distance and displacementMotion graphsCircular motionSUVAT equations of motion
- Waves
Transverse and longitudinal waves · Properties of waves · Reflection of waves · Sound waves (Higher) · Ultrasound and seismic waves (Higher)
Transverse and longitudinal wavesRipple tankReflection in a plane mirrorSound waves and the oscilloscope
- Electromagnetic waves
Electromagnetic spectrum · Refraction · Infrared radiation and surfaces · Uses and hazards of EM waves · Lenses · Visible light and colour · Black body radiation
Electromagnetic spectrumRefraction and Snell's lawRipple tankConduction, convection and radiation
- Magnetism and electromagnetism
Permanent and induced magnets · Magnetic fields · Electromagnetism and solenoids · Fleming's left-hand rule (Higher) · Electric motors (Higher) · Loudspeakers and microphones (Higher) · Induced potential (generator effect) (Higher) · Alternators and dynamos (Higher) · Transformers (Higher)
Magnetic field of a bar magnetMagnetic field around a wire and solenoidThe motor effectElectromagnetic induction
- Space physics
Our solar system · Life cycle of a star · Orbital motion and satellites · Red-shift and the Big Bang
Life cycle of starsOrbits and gravityRed-shift and the expanding universe
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A cyclist is riding along a level road. The kinetic energy of the cyclist and bicycle is 2400 J. The cyclist brakes and comes to a stop in a distance of 12 m. Assume that all of the kinetic energy is transferred by the work done by the braking force.
From the topic: Work done and energy transfer
(a)Calculate the average braking force.
3 marksShow the answerHide the answer
Answer: Work done = 2400 J. F = W ÷ s = 2400 ÷ 12 = 200 N.
Marking points
- Work done by the braking force = 2400 J
- F = 2400 ÷ 12
- F = 200 N
(b)Explain why the brakes become hot.
2 marksShow the answerHide the answer
Answer: Friction between the brake pads and the wheel does work. This transfers energy from the kinetic store to the thermal store of the brakes, so their temperature increases.
Marking points
- Work is done by friction between the brake pads and the wheel.
- Energy is transferred to the thermal store of the brakes, so their temperature increases.
(c)On another day the cyclist brakes from the same speed with an average braking force of 300 N. Calculate the new stopping distance.
2 marksShow the answerHide the answer
Answer: s = W ÷ F = 2400 ÷ 300 = 8.0 m
Marking points
- s = 2400 ÷ 300
- s = 8.0 m
2.When a pressure cooker is working, the steam inside is at a pressure 100 kPa greater than the air outside. The lid has an area of 0.050 m². A small valve in the lid has an area of 0.10 cm².
From the topic: Pressure in fluids Physics only
(a)Calculate the resultant force on the lid caused by this difference in pressure.
2 marksShow the answerHide the answer
Answer: F = pA = 100 000 Pa × 0.050 m² = 5000 N
Marking points
- F = 100 000 × 0.050 (100 kPa written as 100 000 Pa)
- 5000 N
(b)Convert the area of the valve into m².
1 markShow the answerHide the answer
Answer: 0.10 ÷ 10 000 = 1.0 × 10⁻⁵ m²
Marking points
- 1.0 × 10⁻⁵ m² (0.000010 m²)
(c)Calculate the resultant force on the valve.
2 marksShow the answerHide the answer
Answer: F = 100 000 Pa × 1.0 × 10⁻⁵ m² = 1.0 N
Marking points
- F = 100 000 × 1.0 × 10⁻⁵ (allow their area)
- 1.0 N
(d)A small weight is enough to hold the valve shut, but the lid needs strong clips. Explain why.
2 marksShow the answerHide the answer
Answer: The same pressure difference acts on both, but the lid's area is 5000 times the valve's. Force = pressure × area, so the force on the lid is 5000 N compared with only 1.0 N on the valve.
Marking points
- The same pressure acts on a much larger area (5000 times as large).
- So the force on the lid is far bigger (5000 N against 1.0 N), from F = pA.
3.Higher tier. A car pulls away from traffic lights. Its distance–time graph is a curve that gets steeper. A tangent is drawn at 5.0 s. It passes through (1.0 s, 0 m) and (7.0 s, 60 m).
From the topic: Distance–time graphs
(a)Explain how the graph shows that the car is accelerating.
2 marksShow the answerHide the answer
Answer: The curve gets steeper, so the gradient increases. A distance–time gradient tells you the speed, so the speed is increasing.
Marking points
- The gradient (steepness) increases.
- Gradient represents speed, so the speed is increasing.
(b)Determine the speed of the car at 5.0 s.
2 marksShow the answerHide the answer
Answer: Gradient of tangent = (60 − 0) ÷ (7.0 − 1.0) = 60 ÷ 6.0 = 10 m/s
Marking points
- Gradient = 60 ÷ 6.0
- 10 m/s
4.A student switches on a battery-powered toy car and lets it run across a flat floor. The student records its distance from the start line every second. The results are 0 m at 0 s, 0.40 m at 1.0 s, 0.80 m at 2.0 s, 1.20 m at 3.0 s and 1.60 m at 4.0 s.
From the topic: Distance–time graphs
(a)The points lie on a straight line through the origin. What does this show about the motion of the toy car?
1 markShow the answerHide the answer
Answer: The toy car moves at a constant speed.
Marking points
- Constant (steady) speed.
(b)Calculate the speed of the toy car.
2 marksShow the answerHide the answer
Answer: Speed = 1.60 ÷ 4.0 = 0.40 m/s
Marking points
- Speed = 1.60 ÷ 4.0 (or any correct pair of points)
- 0.40 m/s
(c)Suggest one piece of equipment that would let the student measure the times more accurately than a stopwatch.
1 markShow the answerHide the answer
Answer: Light gates connected to a data logger (or a video recording analysed frame by frame).
Marking points
- Light gates / data logger / video analysis.
5.After a marathon in London, each runner is wrapped in a thin blanket made of shiny metal foil.
From the topic: Infrared radiation and surfaces
(a)Infrared is part of the electromagnetic spectrum. Name the part of the spectrum whose wavelengths are just shorter than those of infrared.
1 markShow the answerHide the answer
Answer: Visible light (red light).
Marking points
- Visible light (allow red light).
(b)Give two properties that infrared shares with all other electromagnetic waves.
2 marksShow the answerHide the answer
Answer: Any two from: they are transverse waves; they all move at one speed through a vacuum; they can travel through a vacuum (no medium is needed); they transfer energy from a source to an absorber.
Marking points
- One correct property, e.g. transverse / all have one speed in a vacuum.
- A second correct property, e.g. needs no medium / transfers energy from source to absorber.
(c)Explain how the shiny surface of the blanket helps the runner to stay warm.
2 marksShow the answerHide the answer
Answer: A shiny surface is a poor emitter of infrared, so the blanket gives out little infrared to the surroundings. Its inner surface also reflects infrared from the runner's body back towards the runner, so less energy is transferred away.
Marking points
- Shiny surface is a poor emitter, so little infrared is given out to the surroundings.
- The shiny surface reflects infrared from the body back towards the runner / less energy is transferred away from the runner.
(d)Higher tier. A wall painted white reflects most of the visible light that falls on it, but it absorbs most of the infrared from a warm radiator. What does this show about how a material interacts with electromagnetic waves?
1 markShow the answerHide the answer
Answer: How a material absorbs or reflects electromagnetic waves can depend on their wavelength.
Marking points
- Absorption / reflection by a material varies with the wavelength of the wave.
6.The coil of a motor turns between the poles of a magnet. In position A, the coil's plane lies parallel to the magnetic field. In position B, the coil stands at right angles to the field.
From the topic: Electric motors Higher tier
(a)In which position is the turning effect on the coil greatest? Give a reason for your answer.
2 marksShow the answerHide the answer
Answer: Position A. Here the forces on the two sides act as far from the axle as they can, so their turning effect is biggest.
Marking points
- Position A.
- The forces on the sides act as far from the axle as they can (greatest perpendicular distance), so their turning effect is biggest.
(b)Explain why the forces on the coil have no turning effect in position B.
2 marksShow the answerHide the answer
Answer: In position B both forces act along a line that passes through the axle. Forces through the axle cannot turn the coil about it.
Marking points
- The forces act along a line through the axle (zero distance from it).
- So they cannot make the coil turn (no turning effect).
(c)Suggest why the coil does not stop when it reaches position B.
1 markShow the answerHide the answer
Answer: It is already moving, so it keeps going past position B.
Marking points
- The coil is already moving (has momentum), so it carries on past B.
7.Satellites P and Q move in stable circular orbits around the Earth. P is 800 km above the surface. Q is 20 000 km above the surface.
From the topic: Orbital motion and satellites Physics only
(a)(Higher tier) Which satellite has the greater speed? Give a reason for your answer.
2 marksShow the answerHide the answer
Answer: P. It is closer to the Earth, where the gravitational force is stronger, so it must move faster to stay in a circular orbit.
Marking points
- P
- closer to the Earth, so gravity is stronger and a higher speed is needed for a stable orbit
(b)(Higher tier) Small rockets on P are fired so that its speed decreases. Explain why P cannot stay in the same orbit.
2 marksShow the answerHide the answer
Answer: A stable orbit at a particular radius needs one particular speed. P's speed has changed, so the radius of its orbit must change: P moves closer to the Earth.
Marking points
- each radius of stable orbit has its own particular speed
- speed has changed, so the radius must change (P moves closer to the Earth)
(c)Explain why P does not need its engines to keep it moving round the Earth.
2 marksShow the answerHide the answer
Answer: At that height there is almost no air, so there is almost no resistive force to slow it down. Gravity acts at right angles to its motion, so no forward force is needed to keep its speed; gravity only keeps changing its direction.
Marking points
- (almost) no air resistance or friction at that height to slow it down
- no forward force is needed to keep moving at constant speed; gravity only changes its direction