AQA · GCSE AQA
AQA GCSE Physics November 2021 Paper 1 Foundation (8463/1F)
Set by AQA for AQA GCSE Physics, November 2021: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- November 2021
- Paper
- Paper 1 Foundation
- Code
- 8463/1F
- Tier
- Foundation
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner reportnot public
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Energy
Energy stores and systems · Kinetic and potential energy · Specific heat capacity · Power · Conservation and dissipation of energy · Efficiency · Energy resources
Energy stores and transfersEnergy skate trackSpecific heat capacityPower and efficiency
- Electricity
Circuit symbols · Electrical charge and current · Current, resistance and potential difference · I–V characteristics · LDRs and thermistors · Series and parallel circuits · Mains electricity · Electrical power · Energy transfers in appliances · The National Grid · Static electricity and electric fields
Circuit builderCharge, current, energy and powerResistance of a wireI–V characteristics
- Particle model of matter
Density · Changes of state · Internal energy · Specific latent heat · Particle motion in gases · Pressure in gases
Measuring densityParticle model and states of matterLatent heat and heating curvesGas laws and particles
- Atomic structure
Structure of the atom · Mass number and isotopes · Development of the atomic model · Radioactive decay and nuclear radiation · Nuclear equations · Half-life · Contamination and irradiation · Uses and hazards of radiation · Nuclear fission and fusion
Isotopes and atom builderAtomic models and Rutherford scatteringAlpha, beta and gamma radiationNuclear equations
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
- 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.A shop worker lifts a 14 kg box of tins up onto a shelf 1.6 m above the floor and leaves it there. Gravitational field strength = 9.8 N/kg.
From the topic: Energy stores and systems
(a)State what is meant by a system.
1 markShow the answerHide the answer
Answer: An object or a group of objects.
Marking points
- An object or group of objects (that is being studied).
(b)Name the way in which energy is transferred to the box as it is lifted.
1 markShow the answerHide the answer
Answer: By work done by a force (mechanically).
Marking points
- Work done by a force (accept mechanically).
(c)Calculate the increase in the energy in the box's gravitational potential store.
2 marksShow the answerHide the answer
Answer: E_p = m g h = 14 × 9.8 × 1.6 = 219.52 J, about 220 J
Marking points
- E_p = 14 × 9.8 × 1.6
- E_p = 219.52 J (accept 220 J)
(d)The energy transferred from the chemical store of the worker's muscles is more than your answer. Suggest why.
1 markShow the answerHide the answer
Answer: Some energy is dissipated by heating the worker's body and the surroundings.
Marking points
- Some energy is dissipated to thermal stores (the worker's body warms up).
2.Higher tier. The petrol engine of a car has an efficiency of 0.30.
From the topic: Efficiency
(a)In one minute, the fuel supplies 1.5 MJ of energy to the engine. Calculate the useful energy output of the engine in that minute.
2 marksShow the answerHide the answer
Answer: useful output = efficiency × total input = 0.30 × 1.5 MJ = 0.45 MJ (450 000 J)
Marking points
- useful output = 0.30 × 1.5 (MJ)
- = 0.45 MJ (450 000 J)
(b)Describe two ways in which the car could be made more efficient. Explain how each one works.
4 marksShow the answerHide the answer
Answer: Lubricate the engine's moving parts: this cuts friction, meaning less energy is wasted heating the engine. Streamline the body of the car: this reduces air resistance, so less work is done against it and less energy is dissipated.
Marking points
- Lubricate the moving parts (of the engine).
- This cuts friction, meaning less energy is wasted heating the engine.
- Streamline the car body (allow any other valid change).
- This reduces air resistance, so less work is done against it.
(c)Explain why the efficiency of the engine is less than 1.
2 marksShow the answerHide the answer
Answer: Some energy is always dissipated, for example by friction heating the engine and as sound. Therefore less energy comes out usefully than goes in.
Marking points
- Some of the input energy is always dissipated (e.g. heating the engine and surroundings, or as sound).
- Therefore less energy comes out usefully than is put in.
3.A washing machine has a metal case and is connected to the mains by a three-core cable. Inside the machine, the live wire comes loose and touches the metal case.
From the topic: Mains electricity
(a)Explain what happens when a person touches the case (i) if the earth wire is connected and (ii) if the earth wire is broken. Use ideas about potential difference and current in your answer.
6 marksShow the answerHide the answer
Answer: (i) The earth wire joins the case to earth, so the case stays at (close to) 0 V and does not become live. The live wire is now connected to earth through a path of very low resistance, so a large current flows from the live wire through the case and down the earth wire. The person is also at 0 V, so there is almost no p.d. across them and no current through them. (Not required by the AQA specification, but worth credit: the large current melts the fuse or trips a circuit breaker, which cuts off the live supply.) (ii) With the earth wire broken, nothing carries current away from the case, so the machine may seem to work normally, but the case is now at about 230 V. The person is at about 0 V, so there is a p.d. of about 230 V across their body. A current flows through them to earth: an electric shock, which could be fatal. Switching the machine off may not help if the fault is on the supply side of its switch. (Level-of-response question: the whole answer is read and placed in a level, rather than points being ticked off one by one. Level 3, 5–6 marks: a clear, logical explanation of both cases that links the p.d. across the person to whether a current flows through them. Level 2, 3–4 marks: both cases described with some explanation, or one case explained fully. Level 1, 1–2 marks: simple statements, such as 'the earth wire makes it safe' or 'the person gets a shock'. 0 marks: no relevant content.)
Marking points
- Earth wire connected: the case is kept at (about) 0 V, so it does not become live.
- A large current flows from the live wire through the case and down the low-resistance earth wire.
- The person and the case are both at about 0 V, so there is almost no p.d. across the person and no current through them.
- Earth wire broken: no current flows to earth, but the case is now at about 230 V (it is live).
- The person is at about 0 V, so there is a p.d. of about 230 V across their body.
- A current flows through the person to earth: an electric shock, which could be fatal. (Also credit, beyond the specification: in (i) the large current melts the fuse or trips a circuit breaker.)
4.An electric shower has a power rating of 9.5 kW. A student takes a shower that lasts 6.0 minutes.
From the topic: Energy transfers in appliances
(a)Give the equation that links energy transferred, power and time.
1 markShow the answerHide the answer
Answer: E = Pt (energy transferred = power × time)
Marking points
- E = Pt
(b)Calculate the energy transferred during the shower.
3 marksShow the answerHide the answer
Answer: P = 9500 W and t = 6.0 × 60 = 360 s. E = 9500 × 360 = 3 420 000 J
Marking points
- 9500 W and 360 s
- E = 9500 × 360
- E = 3 420 000 J (accept 3.4 MJ)
(c)Which energy store of the water increases during the shower?
1 markShow the answerHide the answer
Answer: Its thermal store.
Marking points
- Thermal (energy) store of the water
(d)The student cuts the shower to 4.0 minutes. Calculate how much less energy is transferred.
2 marksShow the answerHide the answer
Answer: The shower is 2.0 minutes = 120 s shorter. Energy saved = 9500 × 120 = 1 140 000 J
Marking points
- 9500 × 120
- 1 140 000 J (accept 1.1 MJ)
5.Higher tier only, GCSE Physics only. A cyclist blocks the outlet of a bicycle pump with a finger and pushes the handle in quickly. The air trapped inside the pump becomes warmer.
From the topic: Pressure in gases Physics only
(a)Explain why the temperature of the air in the pump increases.
3 marksShow the answerHide the answer
Answer: The force on the handle moves the piston, so work is done on the air. This transfers energy to the air and increases its internal energy. The average kinetic energy of the molecules increases, because they bounce off the moving piston faster, so the temperature rises.
Marking points
- Work is done on the air (a force moves the piston through a distance).
- Energy is transferred to the air, so its internal energy increases.
- The molecules’ average kinetic energy rises, so the temperature rises.
(b)The cyclist repeats the push very slowly. Explain why the temperature of the air rises much less.
2 marksShow the answerHide the answer
Answer: Energy transferred to the air now has time to pass to the surroundings by heating through the walls of the pump. So the internal energy of the air, and its temperature, hardly change.
Marking points
- More time for energy to be transferred from the air to the surroundings (by heating through the pump).
- So the internal energy and temperature of the air stay almost the same.
(c)After the quick push, the cyclist uses pV = constant to calculate the pressure inside the pump. Explain why the actual pressure is higher than the calculated value.
2 marksShow the answerHide the answer
Answer: pV = constant applies only when the temperature stays the same, but the air has warmed up. Its molecules move faster, striking the walls more frequently and with more force than the calculation assumes.
Marking points
- pV = constant needs a constant temperature, and the temperature has increased.
- The faster molecules hit the walls more often / with more force, so the pressure is higher.
6.Radon-222 is a radioactive gas given off by granite and some other rocks. A radon-222 nucleus, ²²²₈₆Rn, decays by alpha emission to form a nucleus of polonium (Po).
From the topic: Nuclear equations
(a)Give the symbol for an alpha particle, as it is written in a nuclear equation.
1 markShow the answerHide the answer
Answer: ⁴₂He
Marking points
- ⁴₂He (mass number 4 on top, 2 below)
(b)Determine the mass number and the atomic number of the polonium nucleus.
2 marksShow the answerHide the answer
Answer: Mass number: 222 − 4 = 218. Atomic number: 86 − 2 = 84. The nucleus is ²¹⁸₈₄Po.
Marking points
- Mass number 218
- Atomic number 84
(c)Describe how the mass and the charge of a nucleus change when it emits an alpha particle.
2 marksShow the answerHide the answer
Answer: Both go down. The mass number falls by 4, and the charge (the atomic number) falls by 2.
Marking points
- Mass (number) decreases (by 4)
- Charge (atomic number) decreases (by 2)
7.In the 1920s, doctors studied the health of factory workers who had painted watch dials with paint containing radium. Many of the workers had swallowed small amounts of the paint. Radium-226 emits alpha particles, and radium collects in bone.
From the topic: Contamination and irradiation
(a)Explain why the workers were contaminated and not just irradiated.
2 marksShow the answerHide the answer
Answer: Radioactive radium was inside their bodies, so its atoms carried on decaying there. They could not move away from it or remove it.
Marking points
- Radioactive material / radium was inside their bodies (in their bones)
- So it kept emitting radiation / they could not get away from it
(b)The doctors published their findings in medical journals. Explain why it matters that research like this is shared openly and checked by other experts before it is accepted.
3 marksShow the answerHide the answer
Answer: Publishing lets other scientists see the methods and data. Peer review means independent experts check them, so mistakes or untrue claims are more likely to be found. Other researchers can compare the results with their own studies, so an agreed view can be reached and safety rules can be based on reliable evidence.
Marking points
- Other scientists can see / check the methods, data and conclusions
- Errors or false claims are more likely to be found
- Results can be repeated or compared, so scientists agree on them / safety limits are based on reliable evidence
(c)A website selling a drink with added radium claimed that a study showed the drink was healthy. Suggest why a reader should not trust this claim.
2 marksShow the answerHide the answer
Answer: There is no sign that the study was peer reviewed, so independent experts may never have checked it. The seller makes money from the drink, so the report may be one-sided or leave out evidence of harm.
Marking points
- No evidence that the study / claim was peer reviewed (checked by independent experts)
- The seller may be biased because it profits from sales / the claim may be inaccurate or leave out evidence (allow: it goes against published evidence that swallowed radium is very harmful)