AQA · GCSE AQA
AQA GCSE Physics June 2024 Paper 1 Foundation (8463/1F)
Set by AQA for AQA GCSE Physics, June 2024: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- June 2024
- Paper
- Paper 1 Foundation
- Code
- 8463/1F
- Tier
- Foundation
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens the page on AQA’s website that lists it)
- Mark scheme(opens the page on AQA’s website that lists it)
- Examiner report(opens the page on AQA’s website that lists it)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Energy
Energy stores and systems · Kinetic and potential energy · Specific heat capacity · Power · Conservation and dissipation of energy · Efficiency · Energy resources
Energy stores and transfersEnergy skate trackSpecific heat capacityPower and efficiency
- Electricity
Circuit symbols · Electrical charge and current · Current, resistance and potential difference · I–V characteristics · LDRs and thermistors · Series and parallel circuits · Mains electricity · Electrical power · Energy transfers in appliances · The National Grid · Static electricity and electric fields
Circuit builderCharge, current, energy and powerResistance of a wireI–V characteristics
- Particle model of matter
Density · Changes of state · Internal energy · Specific latent heat · Particle motion in gases · Pressure in gases
Measuring densityParticle model and states of matterLatent heat and heating curvesGas laws and particles
- Atomic structure
Structure of the atom · Mass number and isotopes · Development of the atomic model · Radioactive decay and nuclear radiation · Nuclear equations · Half-life · Contamination and irradiation · Uses and hazards of radiation · Nuclear fission and fusion
Isotopes and atom builderAtomic models and Rutherford scatteringAlpha, beta and gamma radiationNuclear equations
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Find the question paper on AQA’s website (the link above opens the page that lists it) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.Together, a cyclist and bicycle have a mass of 75 kg. They are travelling at 8.0 m/s along a level road when the cyclist stops pedalling and brakes.
From the topic: Energy stores and systems
(a)Calculate the energy in the kinetic store of the cyclist and bicycle at 8.0 m/s.
2 marksShow the answerHide the answer
Answer: E_k = 0.5 × 75 × 8.0² = 2400 J
Marking points
- E_k = 0.5 × 75 × 8.0²
- E_k = 2400 J
(b)Describe how the way energy is stored changes as the bicycle slows down.
2 marksShow the answerHide the answer
Answer: The kinetic store decreases. Friction in the brakes does work, so the thermal stores of the brake blocks, wheel rims and surroundings increase.
Marking points
- The kinetic store of the cyclist and bicycle decreases.
- The thermal stores of the brakes (and surroundings) increase, because friction does work.
(c)At one moment during braking the speed is 4.0 m/s. Calculate how much energy has left the kinetic store so far.
3 marksShow the answerHide the answer
Answer: At 4.0 m/s, E_k = 0.5 × 75 × 4.0² = 600 J. Energy transferred = 2400 − 600 = 1800 J.
Marking points
- E_k at 4.0 m/s = 0.5 × 75 × 4.0²
- = 600 J
- Energy transferred = 2400 − 600 = 1800 J
2.This invented data shows the percentage of a model country's electricity that came from each resource in three years. 2005: coal 35%, gas 40%, nuclear 20%, wind 3%, solar 2%. 2015: coal 22%, gas 40%, nuclear 20%, wind 12%, solar 6%. 2025: coal 2%, gas 36%, nuclear 15%, wind 34%, solar 13%.
From the topic: Energy resources
(a)Describe how the shares from coal and from wind changed between 2005 and 2025.
2 marksShow the answerHide the answer
Answer: The share from coal fell from 35% to 2%. The share from wind rose from 3% to 34%.
Marking points
- Coal decreased (from 35% to 2%)
- Wind increased (from 3% to 34%)
(b)Suggest two reasons for these trends.
2 marksShow the answerHide the answer
Answer: Burning coal releases a lot of carbon dioxide, so the country is cutting emissions to limit global warming. Wind turbines have become cheaper, and wind is renewable while coal will run out.
Marking points
- One reason, e.g. coal releases a lot of carbon dioxide / concern about global warming / laws or targets to cut emissions
- A second reason, e.g. wind turbines have become cheaper / wind is renewable while coal will run out / coal also causes acid rain
(c)Scientists agree that the country's gas power stations add to global warming, yet the country has not closed them. Suggest a reason why the gas power stations are still needed.
2 marksShow the answerHide the answer
Answer: Gas stations can be started quickly and run at any time, so they supply electricity when there is little wind or sunlight. Without them, supply might not match demand and there could be power cuts.
Marking points
- Gas power stations are reliable / can be started up quickly
- Needed when wind and solar output is low (to match supply to demand / avoid power cuts)
3.A garden light uses an LDR connected in series with a 10 kΩ fixed resistor across a 12 V supply. An electronic switch turns the light on when the p.d. across the LDR is high enough.
From the topic: LDRs and thermistors
(a)Explain why the p.d. across the LDR increases as it gets dark.
3 marksShow the answerHide the answer
Answer: In the dark the LDR's resistance increases. In series the supply p.d. is shared, and the component with the larger resistance takes the larger share. So the p.d. across the LDR increases.
Marking points
- Resistance of the LDR increases as light intensity falls.
- The supply p.d. is shared between the two components in series.
- The LDR now has a larger share of the p.d. (because its share of the total resistance is larger).
(b)At night the resistance of the LDR is 50 kΩ. Calculate the p.d. across the LDR.
3 marksShow the answerHide the answer
Answer: Total resistance = 50 kΩ + 10 kΩ = 60 000 Ω. Current = 12 ÷ 60 000 = 0.00020 A. P.d. across LDR = 0.00020 × 50 000 = 10 V
Marking points
- Total resistance = 60 000 Ω
- Current = 0.00020 A
- P.d. across the LDR = 10 V
4.A 20 Ω resistor and a 30 Ω resistor are connected in series with a 12 V battery.
From the topic: Series and parallel circuits
(a)Calculate the total resistance of the circuit.
1 markShow the answerHide the answer
Answer: R total = 20 + 30 = 50 Ω
Marking points
- 50 Ω
(b)Calculate the current in the circuit.
2 marksShow the answerHide the answer
Answer: I = V ÷ R = 12 ÷ 50 = 0.24 A
Marking points
- I = 12 ÷ 50
- I = 0.24 A
(c)Calculate the potential difference across the 30 Ω resistor.
2 marksShow the answerHide the answer
Answer: V = I R = 0.24 × 30 = 7.2 V
Marking points
- V = 0.24 × 30 (allow their current from the previous part)
- V = 7.2 V
5.A block of ice with a mass of 0.46 kg melts completely. Density of ice = 920 kg/m³. Density of water = 1000 kg/m³.
From the topic: Density
(a)State the mass of the water formed. Give a reason for your answer.
2 marksShow the answerHide the answer
Answer: 0.46 kg, because mass is conserved when a substance changes state.
Marking points
- 0.46 kg
- Mass is conserved in a change of state.
(b)Calculate the volume of the ice.
2 marksShow the answerHide the answer
Answer: V = m ÷ ρ = 0.46 ÷ 920 = 5.0 × 10⁻⁴ m³
Marking points
- V = 0.46 ÷ 920
- 5.0 × 10⁻⁴ m³ (0.00050 m³)
(c)Calculate the decrease in volume as the ice melts.
2 marksShow the answerHide the answer
Answer: Volume of water = 0.46 ÷ 1000 = 4.6 × 10⁻⁴ m³. Decrease = 5.0 × 10⁻⁴ − 4.6 × 10⁻⁴ = 4.0 × 10⁻⁵ m³.
Marking points
- Volume of water = 4.6 × 10⁻⁴ m³
- Decrease = 4.0 × 10⁻⁵ m³ (allow their ice volume minus 4.6 × 10⁻⁴ m³)
(d)Steam has a much lower density than liquid water. Explain why, in terms of particles.
2 marksShow the answerHide the answer
Answer: The particles in steam are much further apart than in liquid water. So the same mass takes up a much larger volume, giving a lower density.
Marking points
- Particles in a gas are much further apart (than in a liquid).
- So the same mass occupies a much larger volume.
6.Scientists' ideas about atoms have changed over time. In the early 1900s, the plum pudding model was the accepted model of the atom.
From the topic: Development of the atomic model
(a)Describe the plum pudding model of the atom.
2 marksShow the answerHide the answer
Answer: Positive charge fills the whole atom, and negative electrons are dotted through it.
Marking points
- A ball (sphere) of positive charge filling the whole atom
- With negative electrons scattered through it (allow: embedded in it)
(b)Name the discovery that led to the plum pudding model.
1 markShow the answerHide the answer
Answer: The discovery of the electron.
Marking points
- (Discovery of) the electron
(c)Explain why this discovery showed that atoms are not the smallest particles of matter.
2 marksShow the answerHide the answer
Answer: Electrons are particles much smaller than atoms that come from inside them. So atoms must contain smaller particles and can be split into parts.
Marking points
- Electrons are (much) smaller than atoms / come from inside atoms
- So atoms have smaller parts / are not indivisible
(d)Give two differences between the plum pudding model and the nuclear model.
2 marksShow the answerHide the answer
Answer: Any two from: in the nuclear model the positive charge is concentrated in a nucleus at the centre, not spread out; nearly all the mass is in the nucleus, not spread out; most of the nuclear atom is empty space; the electrons are outside the nucleus instead of mixed through the positive charge.
Marking points
- First difference, e.g. positive charge concentrated in a central nucleus (not spread out)
- Second difference, e.g. mass concentrated in the nucleus / atom mostly empty space / electrons outside the nucleus