Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2019 Paper 1 Foundation (8463/1F)

Set by AQA for AQA GCSE Physics, June 2019: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2019
Paper
Paper 1 Foundation
Code
8463/1F
Tier
Foundation
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

6 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A student writes a list of energy resources: coal, geothermal, natural gas, nuclear fuel, tides, wind.

    From the topic: Energy resources

    1. (a)Give two resources from the list that are non-renewable.

      2 marks
      Show the answer

      Answer: Any two of coal, natural gas and nuclear fuel.

      Marking points

      • One of coal / natural gas / nuclear fuel
      • A second, different one of coal / natural gas / nuclear fuel
    2. (b)What is meant by a renewable energy resource?

      1 mark
      Show the answer

      Answer: A resource that is naturally replaced at the rate it is used, so it will not run out.

      Marking points

      • It is replaced (naturally) as it is used (allow: it will not run out)
    3. (c)Most oil in the UK is used for transport. Name one renewable energy resource that could be used for transport instead of oil.

      1 mark
      Show the answer

      Answer: Biofuel, such as bioethanol or biodiesel.

      Marking points

      • Biofuel (allow: electricity generated from a named renewable resource, used to charge electric vehicles)
    4. (d)Geothermal power stations are very reliable. Suggest why the UK generates very little electricity from geothermal energy.

      1 mark
      Show the answer

      Answer: Very few places in the UK have hot rocks close enough to the surface.

      Marking points

      • Few suitable sites / hot rocks are rarely close enough to the surface in the UK
  2. 2.A garden light uses an LDR connected in series with a 10 kΩ fixed resistor across a 12 V supply. An electronic switch turns the light on when the p.d. across the LDR is high enough.

    From the topic: LDRs and thermistors

    1. (a)Explain why the p.d. across the LDR increases as it gets dark.

      3 marks
      Show the answer

      Answer: In the dark the LDR's resistance increases. In series the supply p.d. is shared, and the component with the larger resistance takes the larger share. So the p.d. across the LDR increases.

      Marking points

      • Resistance of the LDR increases as light intensity falls.
      • The supply p.d. is shared between the two components in series.
      • The LDR now has a larger share of the p.d. (because its share of the total resistance is larger).
    2. (b)At night the resistance of the LDR is 50 kΩ. Calculate the p.d. across the LDR.

      3 marks
      Show the answer

      Answer: Total resistance = 50 kΩ + 10 kΩ = 60 000 Ω. Current = 12 ÷ 60 000 = 0.00020 A. P.d. across LDR = 0.00020 × 50 000 = 10 V

      Marking points

      • Total resistance = 60 000 Ω
      • Current = 0.00020 A
      • P.d. across the LDR = 10 V
  3. 3.The heating element of an electric iron has a resistance of 46 Ω. While the iron is in use, the current in the element is 5.0 A.

    From the topic: Electrical power

    1. (a)Calculate the power transferred by the heating element.

      2 marks
      Show the answer

      Answer: P = I²R = 5.0² × 46 = 25 × 46 = 1150 W

      Marking points

      • P = 5.0² × 46
      • P = 1150 W (accept 1200 W, as the data are given to 2 significant figures)
    2. (b)Calculate the potential difference across the element.

      2 marks
      Show the answer

      Answer: V = IR = 5.0 × 46 = 230 V

      Marking points

      • V = 5.0 × 46
      • V = 230 V
    3. (c)The element is replaced with one of resistance 23 Ω, which is used on the same 230 V supply. Calculate the new power of the iron.

      3 marks
      Show the answer

      Answer: I = V ÷ R = 230 ÷ 23 = 10 A. P = VI = 230 × 10 = 2300 W (or P = I²R = 10² × 23 = 2300 W). Halving the resistance on the same p.d. doubles the power.

      Marking points

      • I = 230 ÷ 23 = 10 A
      • P = 230 × 10 or P = 10² × 23
      • P = 2300 W
  4. 4.A block of ice with a mass of 0.46 kg melts completely. Density of ice = 920 kg/m³. Density of water = 1000 kg/m³.

    From the topic: Density

    1. (a)State the mass of the water formed. Give a reason for your answer.

      2 marks
      Show the answer

      Answer: 0.46 kg, because mass is conserved when a substance changes state.

      Marking points

      • 0.46 kg
      • Mass is conserved in a change of state.
    2. (b)Calculate the volume of the ice.

      2 marks
      Show the answer

      Answer: V = m ÷ ρ = 0.46 ÷ 920 = 5.0 × 10⁻⁴ m³

      Marking points

      • V = 0.46 ÷ 920
      • 5.0 × 10⁻⁴ m³ (0.00050 m³)
    3. (c)Calculate the decrease in volume as the ice melts.

      2 marks
      Show the answer

      Answer: Volume of water = 0.46 ÷ 1000 = 4.6 × 10⁻⁴ m³. Decrease = 5.0 × 10⁻⁴ − 4.6 × 10⁻⁴ = 4.0 × 10⁻⁵ m³.

      Marking points

      • Volume of water = 4.6 × 10⁻⁴ m³
      • Decrease = 4.0 × 10⁻⁵ m³ (allow their ice volume minus 4.6 × 10⁻⁴ m³)
    4. (d)Steam has a much lower density than liquid water. Explain why, in terms of particles.

      2 marks
      Show the answer

      Answer: The particles in steam are much further apart than in liquid water. So the same mass takes up a much larger volume, giving a lower density.

      Marking points

      • Particles in a gas are much further apart (than in a liquid).
      • So the same mass occupies a much larger volume.
  5. 5.GCSE Physics only. A student traps some air in a sealed syringe connected to a pressure gauge. The student moves the plunger to change the volume, keeping the temperature constant. Results: 50 cm³, 100 kPa; 40 cm³, 125 kPa; 25 cm³, 200 kPa; 20 cm³, 250 kPa.

    From the topic: Pressure in gases Physics only

    1. (a)Use the results to show that pressure × volume is constant.

      2 marks
      Show the answer

      Answer: 50 × 100 = 5000; 40 × 125 = 5000; 25 × 200 = 5000; 20 × 250 = 5000. Every product is 5000 kPa cm³.

      Marking points

      • At least two products of pressure × volume calculated correctly.
      • All four products are 5000 kPa cm³, so pressure × volume is constant.
    2. (b)Calculate the volume of the air when the pressure is 160 kPa.

      2 marks
      Show the answer

      Answer: V = 5000 ÷ 160 = 31.25 cm³, about 31 cm³

      Marking points

      • V = 5000 ÷ 160
      • V = 31 cm³ (accept 31.25 cm³)
    3. (c)Suggest how the student can keep the temperature of the air constant.

      1 mark
      Show the answer

      Answer: Move the plunger slowly and wait before each reading, so the air has time to return to room temperature.

      Marking points

      • Move the plunger slowly / wait before reading the gauge each time.
    4. (d)Describe the shape of a graph of pressure (y-axis) against volume (x-axis) for these results.

      2 marks
      Show the answer

      Answer: A curve in which the pressure decreases as the volume increases. It falls steeply at small volumes and becomes less steep at large volumes, without touching either axis.

      Marking points

      • A curve: pressure decreases as volume increases.
      • Steep at small volumes and flattening at larger volumes (not a straight line).
  6. 6.Radon-222 is a radioactive gas given off by granite and some other rocks. A radon-222 nucleus, ²²²₈₆Rn, decays by alpha emission to form a nucleus of polonium (Po).

    From the topic: Nuclear equations

    1. (a)Give the symbol for an alpha particle, as it is written in a nuclear equation.

      1 mark
      Show the answer

      Answer: ⁴₂He

      Marking points

      • ⁴₂He (mass number 4 on top, 2 below)
    2. (b)Determine the mass number and the atomic number of the polonium nucleus.

      2 marks
      Show the answer

      Answer: Mass number: 222 − 4 = 218. Atomic number: 86 − 2 = 84. The nucleus is ²¹⁸₈₄Po.

      Marking points

      • Mass number 218
      • Atomic number 84
    3. (c)Describe how the mass and the charge of a nucleus change when it emits an alpha particle.

      2 marks
      Show the answer

      Answer: Both go down. The mass number falls by 4, and the charge (the atomic number) falls by 2.

      Marking points

      • Mass (number) decreases (by 4)
      • Charge (atomic number) decreases (by 2)