AQA · GCSE AQA
AQA GCSE Physics November 2021 Paper 1 Higher (8463/1H)
Set by AQA for AQA GCSE Physics, November 2021: 1 hour 45 minutes and 100 marks, on Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- November 2021
- Paper
- Paper 1 Higher
- Code
- 8463/1H
- Tier
- Higher
- Time
- 1 hour 45 minutes
- Marks
- 100
- Calculator
- Allowed
- Syllabus
- 8463 (first teaching 2016)
- Links checked
- 17 November 2026
Official files
- Question paper(opens AQA’s website)
- Mark scheme(opens AQA’s website)
- Examiner report(opens AQA’s website)
These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.
What this paper covers
5 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.
- Energy
Energy stores and systems · Kinetic and potential energy · Specific heat capacity · Power · Conservation and dissipation of energy · Efficiency · Energy resources
Energy stores and transfersEnergy skate trackSpecific heat capacityPower and efficiency
- Electricity
Circuit symbols · Electrical charge and current · Current, resistance and potential difference · I–V characteristics · LDRs and thermistors · Series and parallel circuits · Mains electricity · Electrical power · Energy transfers in appliances · The National Grid · Static electricity and electric fields
Circuit builderCharge, current, energy and powerResistance of a wireI–V characteristics
- Particle model of matter
Density · Changes of state · Internal energy · Specific latent heat · Particle motion in gases · Pressure in gases
Measuring densityParticle model and states of matterLatent heat and heating curvesGas laws and particles
- Atomic structure
Structure of the atom · Mass number and isotopes · Development of the atomic model · Radioactive decay and nuclear radiation · Nuclear equations · Half-life · Contamination and irradiation · Uses and hazards of radiation · Nuclear fission and fusion
Isotopes and atom builderAtomic models and Rutherford scatteringAlpha, beta and gamma radiationNuclear equations
- Working scientifically
Measuring instruments · Accuracy, precision and errors · Units, prefixes and significant figures
Vernier caliperMicrometer screw gaugeAccuracy, precision and errorsSignificant figures, prefixes and units trainer
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
- 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
- 5. Log mistakes by topic. Keep one line per topic group (Energy, Electricity, Particle model of matter, Atomic structure, Working scientifically) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
7 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.
1.One type of pollen grain has a diameter of 0.000 025 m. The radius of an atom is about 1 × 10⁻¹⁰ m.
From the topic: Units, prefixes and significant figures
(a)Write the diameter of the pollen grain in standard form.
1 markShow the answerHide the answer
Answer: 2.5 × 10⁻⁵ m
Marking points
- 2.5 × 10⁻⁵ m
(b)Write the diameter of the pollen grain in micrometres.
1 markShow the answerHide the answer
Answer: 25 µm
Marking points
- 25 µm
(c)Calculate how many times bigger the diameter of the pollen grain is than the radius of an atom. Give your answer in standard form.
2 marksShow the answerHide the answer
Answer: (2.5 × 10⁻⁵) ÷ (1 × 10⁻¹⁰) = 2.5 × 10⁵ times
Marking points
- (2.5 × 10⁻⁵) ÷ (1 × 10⁻¹⁰)
- 2.5 × 10⁵
(d)A student writes the diameter of the pollen grain as 25 × 10⁻⁶ m. Explain why this is not standard form.
1 markShow the answerHide the answer
Answer: The front number has to be 1 or more but below 10, and 25 is too big. It should be 2.5 × 10⁻⁵ m.
Marking points
- The front number has to be 1 or more but below 10, and 25 is not
2.A lift carries passengers upwards at a steady speed. The lift motor has a useful power output of 9.8 kW. The lift and passengers have a total mass of 1000 kg. Gravitational field strength = 9.8 N/kg.
From the topic: Power
(a)Calculate the work done by the motor in 25 s.
2 marksShow the answerHide the answer
Answer: W = P t = 9800 × 25 = 245 000 J
Marking points
- W = 9800 × 25
- W = 245 000 J
(b)Calculate how high the lift rises in this time.
3 marksShow the answerHide the answer
Answer: Lifting force = weight = 1000 × 9.8 = 9800 N. Height = work done ÷ force = 245 000 ÷ 9800 = 25 m.
Marking points
- Weight = 1000 × 9.8 = 9800 N
- Height = 245 000 ÷ 9800 (allow their work done from the part above)
- Height = 25 m
(c)A second lift carries the same load through the same height. Its motor has a useful power output of 7.0 kW. Calculate how long the second lift takes.
2 marksShow the answerHide the answer
Answer: t = W ÷ P = 245 000 ÷ 7000 = 35 s
Marking points
- t = 245 000 ÷ 7000
- t = 35 s
3.An electric drill becomes warm and noisy when it is used for a long time.
From the topic: Conservation and dissipation of energy
(a)State the principle of conservation of energy.
1 markShow the answerHide the answer
Answer: Energy can never be created or destroyed, so the total stays the same; it can only move between stores or spread out.
Marking points
- Energy cannot be created or destroyed.
(b)Explain why the energy that warms the drill is described as wasted.
2 marksShow the answerHide the answer
Answer: It goes into the thermal stores of the drill and the surrounding air, which is not the job the drill is for. It spreads out, so it cannot easily be used again.
Marking points
- It is transferred to thermal stores of the drill and the surroundings, not to the intended (useful) store.
- It is spread out (dissipated), so it cannot easily be used.
(c)Explain how oiling the gears inside the drill reduces the wasted energy.
2 marksShow the answerHide the answer
Answer: Oil lubricates the gears, which reduces the friction between them. Less work is done against friction, so less energy is dissipated by heating.
Marking points
- Lubrication reduces friction between the moving gears.
- So less energy is transferred by heating (dissipated) to thermal stores.
4.A sensor in a weather station draws a current of 250 mA.
From the topic: Electrical charge and current
(a)Calculate the charge that flows through the sensor in 1.0 minute.
3 marksShow the answerHide the answer
Answer: I = 0.25 A and t = 60 s. Q = 0.25 × 60 = 15 C
Marking points
- Current converted: 0.25 A
- Q = 0.25 × 60
- Q = 15 C
5.A toaster runs from the 230 V mains. The current in it is 4.0 A.
From the topic: Electrical power
(a)State the equation that links power (P), potential difference (V) and current (I).
1 markShow the answerHide the answer
Answer: P = VI, where P is the power, V the potential difference and I the current.
Marking points
- P = VI (allow P = IV)
(b)Calculate the power of the toaster.
2 marksShow the answerHide the answer
Answer: P = VI = 230 × 4.0 = 920 W
Marking points
- P = 230 × 4.0
- P = 920 W
(c)A larger toaster has a power of 1.38 kW. Calculate the current in this toaster when it is connected to the same supply.
3 marksShow the answerHide the answer
Answer: P = 1.38 kW = 1380 W. I = P ÷ V = 1380 ÷ 230 = 6.0 A
Marking points
- 1.38 kW changed to 1380 W
- I = 1380 ÷ 230
- I = 6.0 A
6.Two aluminium blocks are taken out of two ovens. Block A has a mass of 1.5 kg and is at 60 °C. Block B has a mass of 0.50 kg and is at 90 °C. Specific heat capacity of aluminium = 900 J/kg °C.
From the topic: Internal energy
(a)In which block do the particles have the greater average kinetic energy? Give a reason for your answer.
2 marksShow the answerHide the answer
Answer: Block B. It is hotter, and the hotter a block is, the faster its particles vibrate on average.
Marking points
- Block B
- It is at the higher temperature, so its particles vibrate faster on average.
(b)Both blocks are left to cool to room temperature, 20 °C. Calculate the energy transferred from each block to the surroundings.
4 marksShow the answerHide the answer
Answer: Block A: Δθ = 60 − 20 = 40 °C, so ΔE = 1.5 × 900 × 40 = 54 000 J. Block B: Δθ = 90 − 20 = 70 °C, so ΔE = 0.50 × 900 × 70 = 31 500 J.
Marking points
- Temperature changes of 40 °C for A and 70 °C for B
- Correct substitution into ΔE = m c Δθ for either block (1.5 × 900 × 40 or 0.50 × 900 × 70)
- ΔE for A = 54 000 J
- ΔE for B = 31 500 J
(c)A student says: 'Block B has more internal energy than block A because it is hotter.' Use your answers to the previous part to explain why the student is wrong.
2 marksShow the answerHide the answer
Answer: Block A transfers more energy than block B while both cool to the same temperature, so block A had more internal energy. Internal energy is a total over all the particles, so it depends on the mass (number of particles) as well as on the temperature, and block A has three times the mass.
Marking points
- Block A gives out more energy (54 000 J compared with 31 500 J) when cooling to the same temperature, so it had more internal energy.
- Internal energy is the total for all the particles, so it depends on the mass / number of particles as well as on the temperature.
7.A teacher shows a class the results from a computer model of the alpha particle scattering experiment. Total detected: 78 000. Deflected by less than 10°: 77 610. Deflected by 10° to 90°: 387. Deflected by more than 90°: 3.
From the topic: Development of the atomic model
(a)Calculate the percentage of the detected alpha particles that were deflected by less than 10°.
2 marksShow the answerHide the answer
Answer: 77 610 ÷ 78 000 × 100 = 99.5%
Marking points
- 77 610 ÷ 78 000 (× 100)
- 99.5%
(b)Explain why so few alpha particles were deflected by more than 90°.
2 marksShow the answerHide the answer
Answer: Each nucleus takes up only a tiny fraction of its atom. So only the rare alpha particle aimed almost directly at one gets near enough to be pushed back.
Marking points
- The nucleus is a very small part of the atom
- So only a few alpha particles are aimed close enough to a nucleus to be repelled back
(c)Use the scattering experiment to explain how scientific models can change over time.
2 marksShow the answerHide the answer
Answer: The plum pudding model could not explain why some alpha particles were deflected through large angles or bounced back. So it was replaced by the nuclear model, which did explain these results.
Marking points
- The new results (large deflections / bouncing back) could not be explained by the plum pudding model
- So it was replaced by a new model (the nuclear model) that fitted the evidence