Skip to content

AQA · GCSE AQA

AQA GCSE Physics June 2022 Paper 2 Higher (8463/2H)

Set by AQA for AQA GCSE Physics, June 2022: 1 hour 45 minutes and 100 marks, on Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically. The paper itself is on AQA’s website; this page adds what it covers, how to use it and original practice questions on the same topics.

Paper facts

Series
June 2022
Paper
Paper 2 Higher
Code
8463/2H
Tier
Higher
Time
1 hour 45 minutes
Marks
100
Calculator
Allowed
Syllabus
8463 (first teaching 2016)
Links checked
17 November 2026

Official files

These files belong to AQA. Labverse links to them and never hosts or copies them. Labverse is not affiliated with AQA.

What this paper covers

7 topic groups from our map of GCSE Physics — AQA. Revise each one with its topic pages and simulations before you sit the paper.

How to use this paper

  1. 1. Time it. Set 1 hour 45 minutes for 100 marks: about 63 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
  2. 2. Sit it in one go. Open the question paper on AQA’s website (the link above) and work on paper, with no notes.
  3. 3. Mark it with the official scheme. Give a mark only when your answer matches a marking point. Be strict with yourself: it’s the gaps you find that improve your grade.
  4. 4. Read the examiner report. It says which questions students found hardest and what the best answers did, so compare it with your own script.
  5. 5. Log mistakes by topic. Keep one line per topic group (Forces, Forces and motion, Waves, Electromagnetic waves, Magnetism and electromagnetism, Space physics, Working scientifically) and add a tally each time a mark goes there.
  6. 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.

Practise the same topics

8 original exam-style questions on this paper’s topics, written in the style of GCSE AQA (not taken from the paper). Try each one before you reveal the answer.

  1. 1.A student lists six physical quantities: energy, velocity, mass, force, time and displacement.

    From the topic: Scalar and vector quantities

    1. (a)Explain how a scalar quantity is different from a vector quantity.

      2 marks
      Show the answer

      Answer: A scalar is fully given by its size (magnitude). A vector needs its size and a direction as well.

      Marking points

      • Scalar: size (magnitude) alone.
      • Vector: size and a direction.
    2. (b)Give two vector quantities from the student's list.

      2 marks
      Show the answer

      Answer: Any two of: velocity, force, displacement.

      Marking points

      • One correct vector: velocity, force or displacement.
      • A second, different correct vector (no scalar given).
    3. (c)The mass of an object is a scalar, but its weight is a vector. Explain why.

      2 marks
      Show the answer

      Answer: Gravity pulls on the object, and that pull, its weight, is a force. Forces act in a direction (weight acts downwards), whereas mass has no direction.

      Marking points

      • Weight is a force (due to gravity).
      • Forces act in a direction (weight acts down); mass does not.
  2. 2.Higher tier, physics only. A water storage tank on a farm is filled to a depth of 2.5 m. In this question, g = 9.8 N/kg and the water in the tank has a density of 1000 kg/m³.

    From the topic: Pressure and depth in a liquid Higher tierPhysics only

    1. (a)Calculate the pressure due to the column of water at the bottom of the tank.

      2 marks
      Show the answer

      Answer: p = hρg = 2.5 × 1000 × 9.8 = 24 500 Pa

      Marking points

      • p = 2.5 × 1000 × 9.8
      • 24 500 Pa
    2. (b)A tap is fitted to the side of the tank 0.60 m above its base. Calculate the pressure that the water causes at the tap.

      3 marks
      Show the answer

      Answer: Depth of the tap = 2.5 − 0.60 = 1.9 m. p = 1.9 × 1000 × 9.8 = 18 620 Pa, about 1.9 × 10⁴ Pa.

      Marking points

      • Depth of the tap below the surface = 1.9 m.
      • p = 1.9 × 1000 × 9.8
      • 18 620 Pa (accept 18 600 Pa or 1.9 × 10⁴ Pa).
    3. (c)Explain why the pressure at the bottom of the tank is greater than the pressure at the tap.

      2 marks
      Show the answer

      Answer: The bottom is deeper, so there is a taller column of water above it. That column has a greater weight, which presses on each square metre of the bottom.

      Marking points

      • The bottom is deeper, with a taller column of water above it.
      • So a greater weight of water acts on each unit of area.
    4. (d)The farmer replaces the tank with a much wider one, filled to the same depth. State what happens to the pressure at the bottom. Give a reason.

      2 marks
      Show the answer

      Answer: It stays the same (24 500 Pa). The pressure depends only on the depth, the density of the liquid and g, not on the width of the tank.

      Marking points

      • The pressure is unchanged.
      • It depends only on the depth and density (and g), not on the width or the amount of water.
  3. 3.A car is travelling at 30 m/s on a motorway. The driver brakes and the car decelerates uniformly at 7.5 m/s² until it stops.

    From the topic: Acceleration

    1. (a)Calculate the time taken for the car to stop.

      2 marks
      Show the answer

      Answer: t = Δv ÷ a = 30 ÷ 7.5 = 4.0 s

      Marking points

      • t = 30 ÷ 7.5
      • t = 4.0 s
    2. (b)Calculate the braking distance of the car. Use the Physics Equations Sheet.

      3 marks
      Show the answer

      Answer: 0² − 30² = 2 × (−7.5) × s, so s = 900 ÷ 15 = 60 m

      Marking points

      • 0 − 30² = 2 × (−7.5) × s (or s = 30² ÷ (2 × 7.5))
      • s = 900 ÷ 15
      • s = 60 m
  4. 4.The velocity–time graph for a sprinter is a curve. It starts steep and becomes less steep as the race goes on.

    From the topic: Velocity–time graphs

    1. (a)What does the gradient of a velocity–time graph represent?

      1 mark
      Show the answer

      Answer: Acceleration.

      Marking points

      • Acceleration.
    2. (b)Explain what the shape of the graph shows about the sprinter's acceleration.

      2 marks
      Show the answer

      Answer: The gradient decreases as the line becomes less steep. The gradient is the acceleration, so the acceleration is decreasing (although the sprinter is still speeding up).

      Marking points

      • The gradient is getting smaller.
      • So the acceleration is decreasing.
    3. (c)Higher tier. Describe how the distance run in the first 4 s could be found from the graph.

      3 marks
      Show the answer

      Answer: Count the squares under the curve between 0 and 4 s, counting part-squares of about half or more. Work out the distance one square represents (width × height). Multiply the number of squares by this distance.

      Marking points

      • Count the squares under the curve from 0 to 4 s.
      • Find the distance represented by one square (its time width × velocity height).
      • Multiply the number of squares by the distance per square.
  5. 5.A teacher places a small floating plastic bead on the water in a ripple tank, 0.60 m from the vibrating bar that makes the ripples. The ripples cross the tank at 0.25 m/s.

    From the topic: Transverse and longitudinal waves

    1. (a)Describe what the class will see happen to the bead as the ripples pass it, and explain what this shows about the wave.

      3 marks
      Show the answer

      Answer: The bead moves up and down as each ripple passes, but it stays in about the same place and is not carried across the tank. So the water is not travelling with the ripples: the wave transfers energy, not water.

      Marking points

      • The bead moves (bobs) up and down as the ripples pass.
      • The bead stays in roughly the same place / is not carried along by the ripples.
      • So the wave transfers energy, not the water itself.
    2. (b)Calculate the time taken for the first ripple to reach the bead.

      3 marks
      Show the answer

      Answer: t = s ÷ v = 0.60 ÷ 0.25 = 2.4 s

      Marking points

      • t = s ÷ v
      • t = 0.60 ÷ 0.25
      • t = 2.4 s
    3. (c)Ripples on water are transverse waves. Give one other example of a transverse wave.

      1 mark
      Show the answer

      Answer: Light, or any other electromagnetic wave, or a wave on a rope or string.

      Marking points

      • Light / any named electromagnetic wave / a wave on a rope or string (do not accept sound).
  6. 6.A leaflet in a dental surgery gives these radiation doses. One dental X-ray: 0.0050 mSv. One CT scan of the head: 2.0 mSv. Average dose from natural sources for one person in one year: 2.5 mSv.

    From the topic: Uses and hazards of EM waves

    1. (a)Calculate how many dental X-rays give the same dose as one CT scan of the head.

      2 marks
      Show the answer

      Answer: Number = 2.0 ÷ 0.0050 = 400

      Marking points

      • 2.0 ÷ 0.0050
      • 400
    2. (b)Write the dose from one CT scan of the head in sieverts. 1 Sv = 1000 mSv.

      1 mark
      Show the answer

      Answer: 2.0 ÷ 1000 = 0.0020 Sv (2.0 × 10⁻³ Sv)

      Marking points

      • 0.0020 Sv or 2.0 × 10⁻³ Sv.
    3. (c)A parent is worried about their child having a dental X-ray. Use the data to explain why the extra risk is small.

      2 marks
      Show the answer

      Answer: One dental X-ray gives 0.0050 mSv, which is only 1/500 of the 2.5 mSv a person receives from natural sources in an average year. So the extra dose, and the extra risk of harm, is very small.

      Marking points

      • A correct comparison from the data, e.g. 0.0050 mSv is 500 times smaller than the yearly natural dose of 2.5 mSv.
      • So the extra dose, and with it the extra risk of harm, is very small.
    4. (d)What does radiation dose measure?

      1 mark
      Show the answer

      Answer: How likely the radiation a body receives is to harm it: the risk of harm.

      Marking points

      • The risk of harm (to the body) from the radiation received.
  7. 7.A convex lens has a focal length of 5.0 cm. An object 2.0 cm tall stands on the principal axis, 15 cm from the lens.

    From the topic: Lenses Physics only

    1. (a)Describe how a ray diagram with two rays, both starting at the tip of the object, can be used to locate the image.

      3 marks
      Show the answer

      Answer: Draw a ray from the tip of the object parallel to the principal axis as far as the lens, then on through the principal focus on the far side. Draw a second ray from the same point to the middle of the lens, continuing in a straight line. The top of the image is where these two rays cross; draw the image as an arrow from the axis to that point.

      Marking points

      • Ray parallel to the axis, refracted through the principal focus (F) on the far side.
      • Ray through the centre of the lens, not changing direction.
      • Top of the image where the rays cross (image drawn from the axis to that point).
    2. (b)On a correct diagram the rays cross at a point 7.5 cm beyond the lens, 1.0 cm below the principal axis. Describe the image.

      3 marks
      Show the answer

      Answer: It is real (the rays really cross), inverted (below the axis) and diminished (1.0 cm tall, smaller than the 2.0 cm object).

      Marking points

      • Real.
      • Inverted.
      • Diminished (smaller than the object).
    3. (c)Calculate the magnification.

      2 marks
      Show the answer

      Answer: magnification = 1.0 ÷ 2.0 = 0.5 (no unit)

      Marking points

      • magnification = 1.0 ÷ 2.0
      • 0.5
  8. 8.A student wants to show that an electric current produces a magnetic field. A long straight wire passes vertically through a hole in a horizontal sheet of card. The student also has a low-voltage d.c. power supply, a switch, six small plotting compasses and some iron filings.

    From the topic: Electromagnetism and solenoids

    1. (a)Describe how the student could use this equipment to show the shape and direction of the field around the wire.

      6 marks
      Show the answer

      Answer: Connect the wire in series with the switch and the power supply. Before switching on, put the compasses on the card around the wire and note that they all point north. Close the switch so that a large current flows: the needles turn to lie along circles around the wire. Mark the way each N end points, then move the compasses round to build up complete circles with arrows. Sprinkle a thin layer of iron filings on the card and tap it gently, so that the filings form circles centred on the wire, showing the shape but not the direction. Finally, swap the supply connections and check that the needles now point the opposite way. Open the switch between observations so that the wire does not overheat. (Marked by level of response: the examiner judges the description as a whole. A clear, logically ordered method that covers both the shape and the direction, like this one, reaches the top level.)

      Marking points

      • Wire connected in series with the switch and the d.c. supply, and a (large) current switched on.
      • Compasses placed on the card around the wire, at different distances from it.
      • The direction of each needle's N end marked, giving arrows on the field lines.
      • Iron filings sprinkled on the card and the card tapped gently.
      • Compasses or filings show circles centred on the wire.
      • Current reversed and the needles seen to point the other way (or: switched off between readings because the wire gets hot).
    2. (b)Suggest why the compasses should be placed close to the wire.

      1 mark
      Show the answer

      Answer: Near the wire the field is at its strongest. Further away it is weaker, so the needles are turned less far from north.

      Marking points

      • The field is stronger near the wire (weaker further away), so the needles turn further from north there.
    3. (c)State one way the student should keep safe, and give the reason.

      2 marks
      Show the answer

      Answer: Switch the current on only for short times. A large current makes the wire hot enough to burn the student's fingers.

      Marking points

      • Switch off between readings / keep the current on only briefly.
      • A large current heats the wire, which could burn the skin.