BISE Gujranwala · Punjab Class 9
BISE Gujranwala Annual 2022 Class 9 Physics (Objective, Group I) (5471)
Set by BISE Gujranwala for Punjab Class 9 Physics, Annual 2022: 15 minutes and 12 marks, on Physical quantities and measurements, Kinematics, Dynamics, Turning effects of force, Work, energy and power, Mechanical properties of matter, Thermal properties of matter, Nature of science. The paper itself is on BISE Gujranwala’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- Annual 2022
- Paper
- Objective, Group I
- Set by
- BISE Gujranwala
- Code
- 5471
- Tier
- Not tiered
- Time
- 15 minutes
- Marks
- 12
- Calculator
- Not recorded here: check the paper’s instructions
- Syllabus
- Old Punjab syllabus (PCTB Physics 9 used until the 2024-25 session), not the NC 2023 book. Some questions, such as satellites and heat transfer, are not in the new course.
- Links checked
- 17 November 2026
Official files
- Question paper(opens BISE Gujranwala’s website)
- Mark schemenot public
- Examiner reportnot public
These files belong to BISE Gujranwala. Labverse links to them and never hosts or copies them. Labverse is not affiliated with BISE Gujranwala.
What this paper covers
8 topic groups from our map of Punjab Board Class 9 Physics. Revise each one with its topic pages and simulations before you sit the paper.
- Physical quantities and measurements
Physical quantities and SI units · Prefixes and scientific notation · Vernier callipers · Micrometer screw gauge · Measuring mass and time · Measuring cylinders and displacement cans · Errors and uncertainty in measurements · Significant figures · Precision and accuracy
Significant figures, prefixes and units trainerVernier caliperMicrometer screw gaugeMeasuring density
- Kinematics
Scalars and vectors · Types of motion · Distance and displacement · Speed and velocity · Acceleration · Distance–time graphs · Speed–time graphs · Equations of motion · Free fall acceleration
Adding and resolving vectorsDistance and displacementMotion graphsSUVAT equations of motion
- Dynamics
Contact and non-contact forces · Newton's law of gravitation · Fundamental forces · Free-body diagrams · Newton's first law · Newton's second law · Newton's third law · Mass, weight and balances · Friction · Terminal velocity · Momentum and impulse · Conservation of momentum
Free-body diagrams and resultant forceStatic and kinetic frictionOrbits and gravityWeight, mass and gravity
- Turning effects of force
Parallel forces and addition of forces · Torque (moment of force) and couple · Resolution of vectors · Principle of moments · Centre of mass and centre of gravity · Equilibrium and its conditions · States of equilibrium and stability · Circular motion and centripetal force
Adding and resolving vectorsPrinciple of momentsCentre of mass and stabilityFree-body diagrams and resultant force
- Work, energy and power
Work · Kinetic energy · Potential energy · Conservation of energy · Renewable and non-renewable energy sources · Power · Efficiency
Work doneEnergy skate trackEnergy stores and transfersEnergy resources
- Mechanical properties of matter
Elasticity and Hooke's law · Density · Pressure · Pressure in liquids · Atmospheric pressure · Barometers and manometers · Pascal's law and hydraulic systems
Hooke's law and springsMeasuring densityPressure in solidsLiquid pressure and depth
- Thermal properties of matter
Kinetic molecular theory of matter · Plasma: the fourth state of matter · Temperature, heat and internal energy · Liquid-in-glass and thermocouple thermometers · Temperature scales and conversions · Sensitivity, range and linearity
- Nature of science
Physics and its branches · Interdisciplinary research · Scientific method: hypothesis, theory and law · Science, technology and engineering
How to use this paper
- 1. Time it. Set 15 minutes for 12 marks: about 75 seconds a mark. At 8 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on BISE Gujranwala’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. The mark scheme isn’t public, so check answers with your teacher, and use the marking points on our questions below to practise marking.
- 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
- 5. Log mistakes by topic. Keep one line per topic group (Physical quantities and measurements, Kinematics, Dynamics, Turning effects of force, Work, energy and power, Mechanical properties of matter, Thermal properties of matter, Nature of science) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
8 original exam-style questions on this paper’s topics, written in the style of Punjab board exams (not taken from the paper). Try each one before you reveal the answer.
1.A different pair of Vernier Callipers is closed. Its Vernier zero lies on the left of the main-scale zero, and the 6th Vernier division is in line with a main-scale mark. The least count is 0.01 cm.
From the topic: Vernier callipers
(a)Will this instrument give readings that are too large or too small? Give a reason.
2 marksShow the answerHide the answer
Answer: Too small. The Vernier zero starts on the left of (behind) the main-scale zero, so every reading is less than the true length.
Marking points
- Too small
- Vernier zero starts behind (left of) the main-scale zero
(b)Calculate the zero error.
2 marksShow the answerHide the answer
Answer: Zero error = (10 − 6) × 0.01 cm = 0.04 cm, which is added to each reading.
Marking points
- (10 − 6) × L.C.
- 0.04 cm
(c)The callipers are closed on a wooden scale. The main scale reading is 0.8 cm and the 3rd Vernier division is in line. Find the true thickness of the wooden scale.
2 marksShow the answerHide the answer
Answer: Observed reading = 0.8 cm + (3 × 0.01 cm) = 0.83 cm. True thickness = 0.83 cm + 0.04 cm = 0.87 cm.
Marking points
- Observed reading 0.83 cm
- 0.83 + 0.04 = 0.87 cm
2.Fifty identical small steel nails are dropped together into a measuring cylinder of water. The reading rises from 20.0 cm³ to 22.5 cm³.
From the topic: Measuring cylinders and displacement cans
(a)Calculate the volume of one nail.
2 marksShow the answerHide the answer
Answer: Volume of 50 nails = 22.5 − 20.0 = 2.5 cm³. Volume of one nail = 2.5 cm³ ÷ 50 = 0.050 cm³.
Marking points
- Volume of 50 nails = 2.5 cm³
- 2.5 ÷ 50 = 0.050 cm³
(b)Why are fifty nails used instead of one?
1 markShow the answerHide the answer
Answer: One pin would raise the level by much less than one division, too little to read. Fifty pins give a readable rise, and dividing shares the reading error among them.
Marking points
- One pin's rise is too small to read accurately
3.Three equations of motion are used to solve problems on bodies moving in a straight line.
From the topic: Equations of motion
(a)Write down the three equations of motion.
3 marksShow the answerHide the answer
Answer: vf = vi + at; S = vi t + ½at²; 2aS = vf² − vi²
Marking points
- vf = vi + at
- S = vi t + ½at²
- 2aS = vf² − vi²
(b)State two conditions that must be met before these equations can be used.
2 marksShow the answerHide the answer
Answer: The body must move along a straight line, and its acceleration must be uniform.
Marking points
- Motion is along a straight line
- Acceleration is uniform (constant)
4.Wheels and ball bearings are used to make machines and vehicles easier to move.
From the topic: Friction
(a)Explain why rolling friction is less than sliding friction.
2 marksShow the answerHide the answer
Answer: The part of a rolling wheel in contact with the surface does not slide over it (no relative motion at the contact), and the area of contact is very small.
Marking points
- No sliding / relative motion at the point of contact
- Very small area of contact
(b)Describe a simple experiment, using a heavy book, a rubber band and some round pencils, to compare rolling and sliding friction.
3 marksShow the answerHide the answer
Answer: Pull the book across a table with the rubber band and note the stretch of the band. Place the book on the round pencils and pull it again. The band stretches much less, so a smaller force is needed: rolling friction is less than sliding friction.
Marking points
- Pull the book directly on the table and note the stretch of the band
- Repeat with the book resting on round pencils
- Less stretch on the pencils, so rolling friction is smaller
5.Two balls collide head-on on a smooth surface.
From the topic: Conservation of momentum
(a)Use Newton's third law to explain why the total momentum of the two balls is the same after the collision as before it.
3 marksShow the answerHide the answer
Answer: During the collision each ball exerts a force on the other. By Newton's third law these forces are equal in size and opposite in direction, and they act for the same time. So the impulses on the two balls are equal and opposite: the momentum gained by one ball equals the momentum lost by the other, and the total does not change.
Marking points
- Forces on the two balls are equal and opposite (third law)
- They act for the same time, so the impulses (changes in momentum) are equal and opposite
- Momentum gained by one = momentum lost by the other, so the total is unchanged
6.Bodies at rest can be in stable, unstable or neutral equilibrium.
From the topic: States of equilibrium and stability
(a)Define stable, unstable and neutral equilibrium.
3 marksShow the answerHide the answer
Answer: Stable: after a slight tilt the body returns to its original position. Unstable: after a slight tilt it moves further away from its original position. Neutral: after being displaced it stays at rest in its new position.
Marking points
- Stable: returns to its original position after a slight tilt
- Unstable: moves further away from its original position after a slight tilt
- Neutral: stays in its new position (height of G unchanged)
(b)State the state of equilibrium of (i) a brick lying flat on the floor, (ii) a pencil balanced on its sharpened point, (iii) a football resting on level ground.
3 marksShow the answerHide the answer
Answer: (i) Stable. (ii) Unstable. (iii) Neutral.
Marking points
- Brick: stable
- Pencil on its point: unstable
- Football: neutral
7.The law of conservation of energy applies to every process in nature.
From the topic: Conservation of energy
(a)State the law of conservation of energy.
2 marksShow the answerHide the answer
Answer: Energy can neither be created nor destroyed. It can only be changed from one form to another, so the total energy stays constant.
Marking points
- Energy cannot be created or destroyed
- It changes from one form to another; the total stays the same
(b)What is meant by waste energy? Give one cause of it in a machine.
2 marksShow the answerHide the answer
Answer: Waste energy is energy that is converted into a form that cannot be used for the useful work wanted, mainly heat (and sound) spread into the surroundings. It is caused by friction between moving parts (or air resistance).
Marking points
- Energy changed into heat/sound that cannot do useful work
- Cause: friction between moving parts / air resistance
8.A liquid of density ρ is at rest in a container. A horizontal area A lies at a depth h below the surface, with a column of liquid standing on it.
From the topic: Pressure in liquids
(a)Write expressions for the volume and the mass of the liquid column above the area.
2 marksShow the answerHide the answer
Answer: V = Ah, and m = ρV = ρAh.
Marking points
- V = Ah
- m = ρV = ρAh
(b)Hence show that the pressure on the area is P = ρgh.
3 marksShow the answerHide the answer
Answer: The force on the area is the weight of the column: F = w = mg = ρAhg. Then P = F/A = ρAhg ÷ A. The area cancels, leaving P = ρgh.
Marking points
- F = w = mg = ρAhg
- P = F/A = ρAhg ÷ A
- A cancels, giving P = ρgh
(c)Explain why A does not appear in the final equation, and what this means for containers of different widths.
2 marksShow the answerHide the answer
Answer: The weight of the column is proportional to A, so dividing by A cancels it. The pressure at a given depth is therefore the same whatever the width or shape of the container.
Marking points
- The column's weight is proportional to A, so A cancels
- Same pressure at a given depth in a container of any width or shape
(d)Show that the unit of ρgh is N m⁻².
2 marksShow the answerHide the answer
Answer: kg m⁻³ × m s⁻² × m = kg m⁻¹ s⁻². Since 1 N = 1 kg m s⁻², this is (kg m s⁻²) m⁻² = N m⁻².
Marking points
- kg m⁻³ × m s⁻² × m = kg m⁻¹ s⁻²
- Using N = kg m s⁻², this is N m⁻²