Skip to content

Punjab Board Class 9 Physics · Physical quantities and measurements

Physical quantities and SI units

Section 1.1Section 1.2Section 1.3

Sections 1.1 to 1.3. A physical quantity is measured with an instrument and written as a number with a unit. The seven base quantities have the SI units metre, kilogram, second, kelvin, ampere, candela and mole; derived units such as N = kg m s⁻² are built from them.

Loading simulation…

Symbols match your course. Open the full significant figures, prefixes and units trainer simulation for more presets and teacher tools.

Sections 1.1 to 1.3 in brief

Chapter 1 begins by sorting quantities: those an instrument can measure, those it cannot, and which measurable ones count as basic. Prefixes and powers of ten are explained in prefixes and scientific notation, and the rules for counting digits under how to count significant figures.

Physical and non-physical quantities (1.1)

A physical quantity can be measured with an instrument, directly or indirectly, and its value is a number with a unit: a cricket ball weighed on a balance, or a race timed with a stopwatch. A non-physical quantity, such as honesty, anger or the taste of a mango, cannot be measured by any instrument; it depends on each person's view.

Measuring means comparing a quantity with an agreed standard, and the result has two parts. "The desk is 0.75" tells you nothing; "the desk is 0.75 m high" is a measurement.

Base and derived quantities (1.2)

Base quantities are a small set chosen as the foundation; none is defined using the others. Derived quantities are defined from base quantities by multiplying or dividing: speed is distance ÷ time, and density is mass ÷ volume.

The seven SI base units (1.3)

Base quantitySI unitSymbolA sense of size
Lengthmetrema door, about 2 m tall
Masskilogramkga school bag, about 4 kg
Timesecondsroughly one heartbeat
TemperaturekelvinKmelting ice, about 273 K
Electric currentampereAa torch bulb, under 1 A
Intensity of lightcandelacda candle flame, about 1 cd
Amount of substancemolemol18 g of water, about 1 mol

The kilogram is the only base unit whose name carries a prefix, so the gram is not the base unit: change grams to kilograms before using an equation.

Derived units

Start from the defining equation and swap each quantity for its unit. Your book writes the result with negative powers, as in m s⁻¹.

Worked numerical 1: units in terms of base units

Force is mass × acceleration, and acceleration is in m s⁻²:

N=kg×m s−2=kg m s−2\text{N} = \text{kg} \times \text{m s}^{-2} = \text{kg m s}^{-2}

Pressure is force ÷ area:

Pa=Nm2=N m−2=kg m−1 s−2\text{Pa} = \frac{\text{N}}{\text{m}^{2}} = \text{N m}^{-2} = \text{kg m}^{-1}\,\text{s}^{-2}

Charge is current × time, so the coulomb is an ampere second: C = A s. Density is mass ÷ volume, giving kg m⁻³.

Writing units properly

  • Use the agreed symbol, not a home-made short form: m, not mtr; km h⁻¹, not kmph.
  • A symbol takes no plural: 40 kg, not 40 kgs.
  • A unit named after a scientist has a capital symbol (A, C, W), but its full name is in small letters: ampere, coulomb, watt.
  • Leave a space after the number and between symbols: m s⁻¹ is metre per second, but ms⁻¹ would mean per millisecond.

Worked numerical 2: changing units

Chapter 1 has no worked example of changing area, volume or speed units, though numerical problem 1.10 needs a density change. Since 1 cm = 10−210^{-2} m, square that factor for an area and cube it for a volume.

450 cm2=450×10−4 m2=0.045 m2450\ \text{cm}^2 = 450 \times 10^{-4}\ \text{m}^2 = 0.045\ \text{m}^2

1500 cm3=1500×10−6 m3=1.5×10−3 m31500\ \text{cm}^3 = 1500 \times 10^{-6}\ \text{m}^3 = 1.5 \times 10^{-3}\ \text{m}^3

For a density, change the mass and the volume together:

1 g cm−3=10−3 kg10−6 m3=103 kg m−31\ \text{g cm}^{-3} = \frac{10^{-3}\ \text{kg}}{10^{-6}\ \text{m}^{3}} = 10^{3}\ \text{kg m}^{-3}

So aluminium, at 2.7 g cm⁻³, has a density of 2700 kg m⁻³. A speed of 1 km h⁻¹ is 1000 m in 3600 s: divide by 3.6 for m s⁻¹, and multiply by 3.6 to go back.

108 km h−1÷3.6=30 m s−1108\ \text{km h}^{-1} \div 3.6 = 30\ \text{m s}^{-1}

25 m s−1×3.6=90 km h−125\ \text{m s}^{-1} \times 3.6 = 90\ \text{km h}^{-1}

Using the simulation

In the simulation above, pick Units. The Tool menu starts on SI base units: all seven appear, with m and s lit for Speed, the first derived unit.

  1. Under Derived unit, choose Force. The stage shows N = kg m s⁻² and Built from lists kg, m and s. Try Pressure and Charge next.
  2. From the Tool menu, choose Volumes: 250 cm³ becomes 0.00025 m³, and the cube shows why. Pick m³ → cm³ in the Unit menu to convert the other way: 250 m³ is 250 000 000 cm³.
  3. Back in the Tool menu, choose km/h and m/s. The dial opens at 54 km h⁻¹, or 15 m s⁻¹; drag the slider to 108 km h⁻¹ and read 30 m s⁻¹.
  4. Switch to Practice for conversion questions; Hard under Level adds areas and volumes. Press Check, or Reveal for the working.

Phone users will find Controls, Readings and Notes as tabs below the stage.

Common mistakes

  • Giving the gram as the base unit of mass. The SI base unit is the kilogram, the only base unit with a prefix in its name.
  • Calling speed, force or area a base quantity. Each is derived, because it is defined from base quantities by multiplying or dividing.
  • Writing a value without its unit. A length of 0.75 means nothing until you add the m.
  • Inventing short forms or plurals for unit symbols, such as mtr, kmph or 12 kgs. The correct forms are m, km h⁻¹ and 12 kg.
  • Starting a unit's full name with a capital, as in Ampere or Joule. A unit named after a scientist has a capital symbol (A, J), but its name is written ampere or joule.
  • Dividing by 100 to turn cm² into m², or by 1000 to turn cm³ into m³. The true factors are 10⁻⁴ for an area and 10⁻⁶ for a volume.

Exam-style questions

Original questions written in the style of Punjab board exams. Try each one before you reveal the answer.

  1. 1.Some quantities can be measured and others cannot.

    1. (a)What is a physical quantity? Give two examples.

      2 marks
      Show the answer

      Answer: A quantity that can be measured, directly or indirectly, with an instrument. Examples: length, mass, time, temperature.

      Marking points

      • A quantity that can be measured with an instrument (directly or indirectly)
      • Any two correct examples, e.g. length and time
    2. (b)Explain why fear is a non-physical quantity.

      1 mark
      Show the answer

      Answer: No instrument can measure it; it depends on the feelings and judgement of the person.

      Marking points

      • It cannot be measured with an instrument (it depends on the person's judgement)
    3. (c)A student records the height of a door as 2.1. Explain why this is not a complete measurement.

      2 marks
      Show the answer

      Answer: A measurement needs a number and a unit. Only the number is given, so the reading could mean 2.1 m, 2.1 cm or 2.1 of some other unit.

      Marking points

      • A measurement has two parts: a numerical value and a unit
      • The unit is missing, so the size is not known (e.g. 2.1 m or 2.1 cm)
  2. 2.The SI is built on seven base quantities.

    1. (a)How is a derived quantity different from a base quantity?

      2 marks
      Show the answer

      Answer: Base quantities are the few quantities chosen as the foundation, not defined from any others. Derived quantities are defined from base quantities by multiplying or dividing them.

      Marking points

      • Base quantities: the chosen basic quantities, not defined in terms of others
      • Derived quantities: defined from one or more base quantities (e.g. speed from distance and time)
    2. (b)Write the SI unit, with its symbol, of each base quantity: (i) mass (ii) temperature (iii) electric current (iv) amount of substance.

      4 marks
      Show the answer

      Answer: (i) kilogram, kg (ii) kelvin, K (iii) ampere, A (iv) mole, mol

      Marking points

      • kilogram, kg
      • kelvin, K
      • ampere, A
      • mole, mol
  3. 3.Every derived unit can be written in terms of base units.

    1. (a)Write the newton in terms of base units.

      2 marks
      Show the answer

      Answer: Force = mass × acceleration, so N = kg × m s⁻² = kg m s⁻²

      Marking points

      • Force = mass × acceleration
      • N = kg m s⁻²
    2. (b)Write the pascal in terms of base units.

      2 marks
      Show the answer

      Answer: Pressure = force ÷ area, so Pa = N m⁻² = kg m s⁻² ÷ m² = kg m⁻¹ s⁻²

      Marking points

      • Pa = N m⁻² (force ÷ area)
      • Pa = kg m⁻¹ s⁻²
    3. (c)Charge equals current × time. Write the unit of charge in terms of base units.

      1 mark
      Show the answer

      Answer: C = A s

      Marking points

      • A s (ampere second)
  4. 4.Change each value into the unit given.

    1. (a)The density of a sample of iron, 7.8 g cm⁻³, into kg m⁻³.

      2 marks
      Show the answer

      Answer: A gram is 10⁻³ kg and a cubic centimetre is 10⁻⁶ m³, so the number is multiplied by 10⁻³ ÷ 10⁻⁶ = 1000: 7800 kg m⁻³.

      Marking points

      • Multiply by 1000 (10⁻³ kg ÷ 10⁻⁶ m³)
      • 7800 kg m⁻³ (7.8 × 10³ kg m⁻³)
    2. (b)A speed of 63 km h⁻¹ into m s⁻¹.

      2 marks
      Show the answer

      Answer: 63 × 1000 m ÷ 3600 s = 17.5 m s⁻¹

      Marking points

      • 63 × 1000 ÷ 3600 (or 63 ÷ 3.6)
      • 17.5 m s⁻¹
    3. (c)The area of a classroom whiteboard, 2.5 m², into cm².

      2 marks
      Show the answer

      Answer: 1 m² = 100 cm × 100 cm = 10⁴ cm², so 2.5 m² = 2.5 × 10⁴ cm² = 25 000 cm²

      Marking points

      • 1 m² = 10⁴ cm²
      • 2.5 × 10⁴ cm² (25 000 cm²)

Quick check

6 questions

  1. 1.Which of these is a base quantity?
  2. 2.Which pair gives the SI base unit of temperature and its symbol?
  3. 3.Which of these is the newton written in base units?
  4. 4.Which of these cannot be measured with any instrument?
  5. 5.Which SI base unit has a prefix in its name?
  6. 6.How many cubic centimetres make one cubic metre?