Magnitude alone, or magnitude and direction?
"How long is a T20 match?" "About three hours" is a full answer. "Which way is the post office?" needs a direction as well as a distance.
- A scalar is a physical quantity given in full by its magnitude alone: a number with its unit, such as 45 kg or 35 °C.
- A vector is a physical quantity given in full only when you state its magnitude and its direction, such as 600 N vertically downwards.
| Scalars | Vectors |
|---|---|
| mass, distance, speed, time, length, energy, temperature | weight, displacement, velocity, force, acceleration |
Scalars add like ordinary numbers: 40 min plus 25 min is 65 min. Vectors do not: forces of 6 N and 8 N can give anything from 2 N to 14 N, depending on the angle between them.
Writing and drawing a vector
Books print a vector in bold, such as F. By hand, put an arrow over the letter: . The plain italic means the magnitude alone.
For the representative line, draw reference axes at right angles (x across, y up) meeting at the origin O, and pick a scale such as 1 cm for 20 N. From O, draw a line of the scaled length at angle θ, measured anticlockwise from the positive x-axis, ending in an arrowhead. The start is the tail; the arrowhead is the head.
Map directions are often measured from north instead: "30° east of north" turns 30° from north towards east, which is 60° anticlockwise from east (+x).
Worked numerical 1: a pigeon in flight
Question. A pigeon flies at 18 m/s towards the north-west. Draw its representative line.
Data: . North-west is half-way between north and west: 45° west of north.
Scale: 1 cm represents 3 m/s, so
Drawing: draw N–S and E–W lines crossing at O. From O, draw a 6.0 cm line at 45° from north towards west, add the arrowhead and label it v. Measured anticlockwise from east, this direction is 90° + 45° = 135°.
The resultant and the head-to-tail rule
The resultant vector is a single vector with the same effect as two or more vectors acting together. The graphical method uses the head-to-tail rule: draw the vectors to scale, starting each one at the head of the one before. The resultant starts at the tail of the first vector and ends at the head of the last. Convert its length with the scale and measure its angle with a protractor. Drawing order does not change it.
Worked numerical 2: a rickshaw ride
Question. A rickshaw leaves a chowk, travels 3.0 km due east and then 2.0 km due north. Find (a) the distance covered and (b) the displacement.
(a) Distance is a scalar, so simply add: 3.0 + 2.0 = 5.0 km.
(b) Scale: 1 cm represents 0.5 km.
Draw 6.0 cm towards east, then 4.0 cm towards north from its head. The resultant measures about 7.2 cm, at about 34° north of east.
The displacement is 3.6 km, 34° north of east: shorter than the distance, because the route bends. As the parts are at right angles, Pythagoras agrees: (see section 4.5).
Try it with the simulation
In the simulation above, Add vectors mode opens on Two forces at right angles: = 3 N along +x and = 4 N at 90°. Angles are measured anticlockwise from +x and shown to 0.1°. Press Reset first if anything has changed.
- The Resultant card reads 5.00 N. Choose Two forces in the same direction under Example: 3 N and 4 N, now both along +x, give 7.00 N.
- Return to Two forces at right angles. If does not yet start at the head of , press Head-to-tail. Then press Swap: the route changes, but the red resultant does not.
- To rebuild the rickshaw ride, press Displacement under The arrows show. Pick under Change and set its Size to 2.0 km ( is already 3.0 km east). Press Swap again so the east part comes first, as in the ride. The cards give 3.61 km and "33.7° north of east", as in worked numerical 2.
- Turn on Scale drawing (grid, protractor and ruler) and measure the resultant with the ruler and protractor, using the scale on the badge.