The three equations of motion
When a body moves in a straight line with uniform acceleration, five quantities describe its motion: the initial velocity , the final velocity , the acceleration , the time taken and the distance covered . Your textbook links them with three equations, numbered in this order:
Worked solutions in your textbook refer to them by number, for example "from the third equation of motion", so learn the numbering as well as the equations. There is no formula sheet in the Punjab exam, so all three must be recalled. The textbook states these equations without deriving them, and its numerical problems ask you to apply them.
The first equation is the definition of acceleration rearranged. Start from , multiply both sides by and you reach .
Rules to follow before you substitute
- The motion must be along a straight line.
- The acceleration must be uniform. If it changes, these equations do not apply.
- Only the sizes of the vector quantities go into the equations, with a sign to show direction.
- Take the direction of as positive. Any quantity pointing the opposite way is negative, so a body that is slowing down has a negative .
- Change every value into SI units first: into , minutes into seconds, km into m.
Watch for hidden data in the wording. "Starts from rest" gives . "Comes to rest" or "stops" gives . "Moves with uniform velocity" gives .
Choosing the right equation
Each equation contains four of the five quantities and leaves one out.
| Equation | Quantities it contains | Quantity it leaves out |
|---|---|---|
| First | vf, vi, a, t | S |
| Second | S, vi, a, t | vf |
| Third | vf, vi, a, S | t |
List the data with symbols, mark the unknown with a question mark, then find the one quantity that is neither given nor asked for. Pick the equation that leaves that quantity out.
Worked numerical 1
A car on the M-2 is moving at . To overtake a truck it accelerates uniformly at for 8 s. Find the distance it covers and its final velocity.
Data: , , , The final velocity is not needed for , so use the second equation.
For the final velocity use the first equation: .
Check with the third equation: and . Both sides agree.
Worked numerical 2: slowing down
A train moving at brakes uniformly and stops after covering 450 m. Find its acceleration and the time it takes to stop.
Data: , , , Time is not given, so use the third equation.
The minus sign shows a deceleration of . Now the first equation gives the time: , so .
Test the equations in the simulation
In the simulation above, choose Custom and set and . Before you press play, predict the final velocity and distance at s. The first equation gives , and the second gives m. Run the car, pause as the time readout reaches 6 s, and compare. The velocity readout at that moment is your .