BISE Gujranwala · Punjab Class 9
BISE Gujranwala Annual 2025 Class 9 Physics (Subjective, Group II)
Set by BISE Gujranwala for Punjab Class 9 Physics, Annual 2025: 1 hour 45 minutes and 48 marks, on Physical quantities and measurements, Kinematics, Dynamics, Turning effects of force, Work, energy and power, Mechanical properties of matter, Thermal properties of matter, Nature of science. The paper itself is on BISE Gujranwala’s website; this page adds what it covers, how to use it and original practice questions on the same topics.
Paper facts
- Series
- Annual 2025
- Paper
- Subjective, Group II
- Set by
- BISE Gujranwala
- Tier
- Not tiered
- Time
- 1 hour 45 minutes
- Marks
- 48
- Calculator
- Not recorded here: check the paper’s instructions
- Syllabus
- Old Punjab syllabus (PCTB Physics 9 used until the 2024-25 session), not the NC 2023 book. Some questions, such as satellites and heat transfer, are not in the new course.
- Links checked
- 17 November 2026
Official files
- Question paper(opens BISE Gujranwala’s website)
- Mark schemenot public
- Examiner reportnot public
These files belong to BISE Gujranwala. Labverse links to them and never hosts or copies them. Labverse is not affiliated with BISE Gujranwala.
What this paper covers
8 topic groups from our map of Punjab Board Class 9 Physics. Revise each one with its topic pages and simulations before you sit the paper.
- Physical quantities and measurements
Physical quantities and SI units · Prefixes and scientific notation · Vernier callipers · Micrometer screw gauge · Measuring mass and time · Measuring cylinders and displacement cans · Errors and uncertainty in measurements · Significant figures · Precision and accuracy
Significant figures, prefixes and units trainerVernier caliperMicrometer screw gaugeMeasuring density
- Kinematics
Scalars and vectors · Types of motion · Distance and displacement · Speed and velocity · Acceleration · Distance–time graphs · Speed–time graphs · Equations of motion · Free fall acceleration
Adding and resolving vectorsDistance and displacementMotion graphsSUVAT equations of motion
- Dynamics
Contact and non-contact forces · Newton's law of gravitation · Fundamental forces · Free-body diagrams · Newton's first law · Newton's second law · Newton's third law · Mass, weight and balances · Friction · Terminal velocity · Momentum and impulse · Conservation of momentum
Free-body diagrams and resultant forceStatic and kinetic frictionOrbits and gravityWeight, mass and gravity
- Turning effects of force
Parallel forces and addition of forces · Torque (moment of force) and couple · Resolution of vectors · Principle of moments · Centre of mass and centre of gravity · Equilibrium and its conditions · States of equilibrium and stability · Circular motion and centripetal force
Adding and resolving vectorsPrinciple of momentsCentre of mass and stabilityFree-body diagrams and resultant force
- Work, energy and power
Work · Kinetic energy · Potential energy · Conservation of energy · Renewable and non-renewable energy sources · Power · Efficiency
Work doneEnergy skate trackEnergy stores and transfersEnergy resources
- Mechanical properties of matter
Elasticity and Hooke's law · Density · Pressure · Pressure in liquids · Atmospheric pressure · Barometers and manometers · Pascal's law and hydraulic systems
Hooke's law and springsMeasuring densityPressure in solidsLiquid pressure and depth
- Thermal properties of matter
Kinetic molecular theory of matter · Plasma: the fourth state of matter · Temperature, heat and internal energy · Liquid-in-glass and thermocouple thermometers · Temperature scales and conversions · Sensitivity, range and linearity
- Nature of science
Physics and its branches · Interdisciplinary research · Scientific method: hypothesis, theory and law · Science, technology and engineering
How to use this paper
- 1. Time it. Set 1 hour 45 minutes for 48 marks: about 131 seconds a mark. At 53 minutes you should be roughly halfway through the marks; if you’re well behind, speed up on the short questions.
- 2. Sit it in one go. Open the question paper on BISE Gujranwala’s website (the link above) and work on paper, with no notes.
- 3. Mark it with the official scheme. The mark scheme isn’t public, so check answers with your teacher, and use the marking points on our questions below to practise marking.
- 4. Learn from the marks you lost. For every lost mark, note whether it was knowledge, method, reading the question or time.
- 5. Log mistakes by topic. Keep one line per topic group (Physical quantities and measurements, Kinematics, Dynamics, Turning effects of force, Work, energy and power, Mechanical properties of matter, Thermal properties of matter, Nature of science) and add a tally each time a mark goes there.
- 6. Revisit, then redo. Work through the weakest group’s topic pages and simulations, try the questions below, and come back to the paper in a week.
Practise the same topics
6 original exam-style questions on this paper’s topics, written in the style of Punjab board exams (not taken from the paper). Try each one before you reveal the answer.
1.Significant figures show how reliably a quantity has been measured.
From the topic: Significant figures
(a)What are significant figures?
2 marksShow the answerHide the answer
Answer: The digits in a measurement that are known reliably, together with the first doubtful (estimated) digit.
Marking points
- The digits that are known reliably (accurately)
- Plus the first doubtful (estimated) digit
(b)Give the number of significant figures shown by each reading: (i) 0.0405 m (ii) 7.20 s (iii) 1.080 × 10⁻² kg
3 marksShow the answerHide the answer
Answer: (i) 3 (ii) 3 (iii) 4
Marking points
- 0.0405 m: 3
- 7.20 s: 3
- 1.080 × 10⁻² kg: 4
(c)Which zeros in 0.00350 m are significant? Give a reason.
2 marksShow the answerHide the answer
Answer: Only the last zero. The zeros before the 3 only fix the decimal point, but a zero at the end of a decimal was measured.
Marking points
- Only the final zero (after the 5)
- Leading zeros only fix the decimal point; an end zero after the point counts
2.A boat sails at 12 m/s in a direction 40° east of north.
From the topic: Scalars and vectors
(a)Using a scale of 1 cm = 2 m/s, find the length of the representative line.
1 markShow the answerHide the answer
Answer: 12 ÷ 2 = 6.0 cm.
Marking points
- 6.0 cm
(b)Taking east as the positive x-axis, find the angle the velocity makes with it, measured anticlockwise.
1 markShow the answerHide the answer
Answer: 90° − 40° = 50°.
Marking points
- 50°
(c)Describe how to draw the representative line of this velocity.
3 marksShow the answerHide the answer
Answer: Draw north–south and east–west lines crossing at a point O. From O, draw a line 6.0 cm long at 40° from north towards east (50° from east). Put an arrowhead at the far end and label it v.
Marking points
- Reference lines (N–S and E–W, or x and y axes) crossing at O
- 6.0 cm line from O at 40° east of north (or 50° from the x-axis)
- Arrowhead at the far end, showing the direction
3.A shopkeeper in Sialkot owns a mechanical (beam) balance with a set of standard weights and a spring balance marked in newtons. A 2 kg packet of sugar is measured with each. Take g = 10 N/kg.
From the topic: Mass, weight and balances
(a)Which instrument measures mass and which measures weight?
2 marksShow the answerHide the answer
Answer: The mechanical balance measures mass. The spring balance (force meter) measures weight.
Marking points
- Mechanical (beam) balance: mass
- Spring balance: weight
(b)What does the spring balance read on the Earth?
1 markShow the answerHide the answer
Answer: w = mg = 2 × 10 = 20 N.
Marking points
- 20 N
(c)The packet and both instruments are taken to the Moon, where g = 1.6 N/kg. State and explain the reading of each instrument there.
4 marksShow the answerHide the answer
Answer: The spring balance reads w = 2 × 1.6 = 3.2 N; it is less because g is smaller, so the weight is smaller and the spring stretches less. The beam balance still needs 2 kg of standard weights, because the Moon's gravity reduces the pull on both pans by the same factor, so the beam stays level.
Marking points
- Spring balance reads 3.2 N
- Smaller g gives a smaller weight / less stretch of the spring
- Beam balance is still balanced by 2 kg of standard weights
- g acts equally on both pans, so the comparison is unchanged
4.A labourer moves 60 kg of bricks in a wheelbarrow. The weight of the bricks acts 0.40 m from the wheel's axle, and the labourer lifts the handles vertically at 1.20 m from the axle. Ignore the weight of the wheelbarrow. Take g = 10 N/kg.
From the topic: Principle of moments
(a)Calculate the weight of the bricks.
1 markShow the answerHide the answer
Answer: w = mg = 60 × 10 = 600 N.
Marking points
- 600 N
(b)Use the principle of moments about the axle to find the upward force needed to hold the handles still.
3 marksShow the answerHide the answer
Answer: Moment of the bricks = 600 × 0.40 = 240 N m. For balance, F × 1.20 = 240, so F = 240 ÷ 1.20 = 200 N.
Marking points
- Moment of bricks = 600 × 0.40 = 240 N m
- F × 1.20 = 240
- F = 200 N
(c)Explain why the handles are made long.
1 markShow the answerHide the answer
Answer: A longer moment arm for the lifting force means a smaller force gives the same moment.
Marking points
- Larger moment arm, so less force is needed for the same moment
5.Density is a property of every substance.
From the topic: Density
(a)Define density.
1 markShow the answerHide the answer
Answer: Density is the mass per unit volume of a substance (ρ = m/V).
Marking points
- Mass per unit volume
(b)Write the SI unit of density.
1 markShow the answerHide the answer
Answer: Kilogram per cubic metre, kg m⁻³.
Marking points
- kg m⁻³
(c)Show that 1 g cm⁻³ = 1000 kg m⁻³.
2 marksShow the answerHide the answer
Answer: 1 g = 10⁻³ kg and 1 cm³ = 10⁻⁶ m³, so 1 g cm⁻³ = 10⁻³ kg ÷ 10⁻⁶ m³ = 10³ kg m⁻³ = 1000 kg m⁻³.
Marking points
- 1 g = 10⁻³ kg and 1 cm³ = 10⁻⁶ m³
- 10⁻³ ÷ 10⁻⁶ = 10³, so 1000 kg m⁻³
(d)Express a density of 1.26 g cm⁻³ in kg m⁻³.
1 markShow the answerHide the answer
Answer: 1.26 × 1000 = 1260 kg m⁻³.
Marking points
- 1260 kg m⁻³
6.The molecules of a gas in a sealed steel can have a total kinetic energy of 900 J and a total potential energy of 60 J, measured from a chosen zero. The can is left in sunlight, and 240 J of heat flows into the gas. No energy leaves the gas.
From the topic: Temperature, heat and internal energy
(a)Find the internal energy of the gas before it is heated.
1 markShow the answerHide the answer
Answer: Internal energy = 900 J + 60 J = 960 J.
Marking points
- 900 + 60 = 960 J
(b)Find the internal energy of the gas after the heat has flowed in.
2 marksShow the answerHide the answer
Answer: New internal energy = 960 J + 240 J = 1200 J.
Marking points
- Adds the heat to the internal energy: 960 + 240
- 1200 J
(c)What happens to the temperature of the gas? Explain in terms of its molecules.
2 marksShow the answerHide the answer
Answer: The temperature rises. The gas molecules move faster, so their average kinetic energy increases.
Marking points
- The temperature rises
- The molecules move faster, so their average kinetic energy increases