An original Labverse practice paper — not an official exam paper
Punjab Board Class 9 Physics
Punjab Class 9 Physics Objective practice paper C
Written by Labverse from our own exam-style questions, to the same time and total marks as Punjab BISE boards’ Objective, on the same topics. It is not set, checked or endorsed by Punjab BISE boards.
- Time allowed
- 15 minutes
- Total marks
- 12
- Questions
- 12
- Level
- Not tiered
Instructions
- Answer every question. Work in one sitting and stop when the time is up.
- Each question has one correct answer. Choose A, B, C or D. Each question is worth 1 mark.
To print the answers too, open the mark scheme at the end first.
Marks by topic
- Physical quantities and measurements · 2 marks
- Kinematics · 1 mark
- Dynamics · 2 marks
- Turning effects of force · 2 marks
- Work, energy and power · 2 marks
- Mechanical properties of matter · 2 marks
- Magnetism · 1 mark
Questions
- Question 1Vernier callipers
The least count of the Vernier Callipers used in school laboratories is:
- A0.01 mm
- B0.01 cm
- C1 mm
- D0.1 cm
- Question 2Micrometer screw gauge
With the jaws closed, the zero of the circular scale is below the horizontal line. The zero error:
- Amust be subtracted from each reading
- Bmust be added to each reading
- Cis zero
- Ddepends on the object measured
- Question 3Distance–time graphs
The distance–time graph of a body is a horizontal straight line. The body is:
- Aat rest
- Bdecelerating
- Caccelerating
- Dmoving with uniform speed
- Question 4Newton's law of gravitation
The centripetal force that keeps an artificial satellite in its orbit is provided by:
- Athe satellite's own engines
- Bair resistance at that height
- Cthe magnetic force of the Earth
- Dthe gravitational pull of the Earth
- Question 5Momentum and impulse
The SI unit of momentum is:
- Akg m s⁻²
- Bkg m s⁻¹
- CN s⁻¹
- DJ s
- Question 6Resolution of vectors
The rectangular components of a vector are always:
- Aparallel to each other
- Bperpendicular to each other
- Cinclined at 45° to each other
- Dequal in size to each other
- Question 7Centre of mass and centre of gravity
A uniform pole 2 m long weighs 40 N. A 40 N load hangs from one end. Where must the pole be supported so it stays level?
- A1.5 m from the loaded end
- B1.0 m from the loaded end
- C0.5 m from the loaded end
- D0.25 m from the loaded end
- Question 8Work
A force does 2.4 kJ of work while moving a body 12 m in its own direction. The size of the force is:
- A0.2 N
- B200 N
- C20 N
- D28 800 N
- Question 9Kinetic energy
Both the mass and the speed of a body are doubled. Its kinetic energy becomes:
- A4 times as much
- B6 times as much
- C2 times as much
- D8 times as much
- Question 10Density
A block of wood is cut into two unequal pieces. Compared with the whole block, the density of the smaller piece is:
- Athe same
- Bhalf
- Cless
- Dgreater
- Question 11Pressure
An area of 50 cm² is equal to:
- A0.00050 m²
- B0.50 m²
- C0.050 m²
- D0.0050 m²
- Question 12Magnetic field and field lines
On a diagram of lines of force, a stronger magnetic field is shown by:
- Alines drawn in a darker colour
- Blines that are longer than the rest
- Clines packed more closely together
- Dlines drawn with thicker strokes
End of practice paper · 12 marks in total
Mark schemeOpen it only after you have finished the paper.ShowHide
1. B Least count = 1 mm − 0.9 mm = 0.1 mm, which is 0.01 cm. 0.01 mm is the least count of a micrometer screw gauge.
Revise: Vernier callipers
2. A A zero below the line means the gauge already shows a small reading when closed, so it reads too much. Subtract the zero error.
Revise: Micrometer screw gauge
3. A A horizontal line means the distance stays the same as time passes, so the body is not moving.
Revise: Distance–time graphs
4. D The Earth's gravitational force on the satellite points towards the centre of its circular path, so it acts as the centripetal force. No engine is needed to stay in orbit.
Revise: Newton's law of gravitation
5. B Momentum = mass × velocity, so its unit is kg × m s⁻¹. This is also equal to N s.
Revise: Momentum and impulse
6. B Rectangular (perpendicular) components lie along the x- and y-axes, which are at 90° to each other. Their sizes depend on the direction of the vector.
Revise: Resolution of vectors
7. C The pole's weight acts at its midpoint, 1.0 m from the loaded end. Moments about the loaded end: 80 × x = 40 × 1.0, so x = 0.5 m.
8. B F = W ÷ S = 2400 J ÷ 12 m = 200 N. Remember to change 2.4 kJ into 2400 J first.
Revise: Work
9. D Doubling m doubles Ek and doubling v multiplies it by 4, so together Ek becomes 2 × 4 = 8 times as much.
Revise: Kinetic energy
10. A Density depends on the material, not the size. The smaller piece has less mass and less volume in the same ratio.
Revise: Density
11. D 1 m² = 10 000 cm², so 50 cm² = 50 ÷ 10 000 = 0.0050 m². Dividing by 100 gives the wrong answer of 0.50 m².
Revise: Pressure
12. C Field strength is shown by the spacing of the lines: the more lines that pass through a given area, the stronger the field.
Revise: Magnetic field and field lines