A slinky you can slow down
The stage shows the first four metres of a very long slinky, with a bead on every coil standing in for one particle of the medium. A source at the left-hand end starts to vibrate when you press Play. The rest of the slinky does not move at once: the disturbance spreads out from the source at the wave speed, and each bead stirs only when that front arrives. The slinky carries on past the edge of the stage, so no reflected wave ever comes back to muddle the picture.
Watching one particle
The highlighted particle is the most important thing on the stage. In transverse mode it moves straight up and down across the slinky, while crests sweep past it to the right. Its fading trail draws a short vertical line, never a path along the chain. Switch to longitudinal mode and it slides back and forth along the slinky instead, but always about the same mark on the ruler, and after each complete cycle it is exactly where it began. Energy reaches every bead down the line, yet no bead makes that trip. The diamond marker rides a single crest, or a single compression, from one end of the stage to the other, so you can see what really does travel.
Measuring λ, T and f
Press Ruler to bring up markers A and B. Line them up with neighbouring crests, or neighbouring compressions, and the gap between them is one wavelength. Spanning several wavelengths and dividing gives a more precise value, exactly as it would with a real slinky and a metre rule.
For the period, press Count. Timing begins as the next crest reaches the tracked particle; press Count again and it ends when a later crest arrives, so it always covers a whole number of waves. Time divided by waves gives the period, and waves divided by time gives the frequency. Multiply your frequency by your wavelength and compare the result with the speed set on the slider. With careful measurements, agrees to within a few per cent.
Two graphs that look alike
The displacement–distance graph is a snapshot: every particle is plotted at its rest position against how far it is displaced at that instant. Crest to crest along its horizontal axis is a distance, the wavelength. The displacement–time graph follows only the tracked particle, and crest to crest on it is a time, the period . Both are sine curves, so read the axis labels before anything else.
In longitudinal mode the displacement points along the slinky, yet the graphs still plot it upwards, with positive meaning away from the source. A compression sits where the snapshot crosses zero heading downwards: beads just behind it have been pushed forward and beads just ahead have been pushed back, so they bunch up. A rarefaction sits where the line crosses zero heading upwards.
What sets each quantity
The source decides the frequency. The slinky decides the speed, which for a real one depends on how firmly it is stretched. The wavelength is then whatever fits, , so doubling the frequency packs the crests twice as closely. Changing the amplitude alters neither the speed nor the wavelength, only the energy carried. A new speed counts as a new slinky, so the wave starts again from rest.