Transverse and Longitudinal Waves: What Vibrates and How to Read Wave Graphs
See what actually vibrates in transverse and longitudinal waves, the evidence that waves carry energy but not matter, and how to tell a displacement–distance graph from a displacement–time graph and read each one.
Published · 7 min read
On this page
A wave is a travelling disturbance that carries energy from one place to another. The material it passes through only wobbles about where it was. What makes the two types of wave different is the direction of that wobble:
- In a transverse wave, the vibrations are at right angles to the direction the wave travels. Flick one end of a long rope up and down, and a hump runs along it while each bit of rope moves only up and down.
- In a longitudinal wave, the vibrations are along the same line as the direction the wave travels. Push and pull one end of a stretched slinky, and bunched-up regions called compressions run along it, with stretched-out regions called rarefactions between them.
Both types have an amplitude, a wavelength, a frequency and a period. You can read these from two kinds of graph that look almost identical, which is where many exam marks are lost.
What vibrates in a transverse wave?
Picture a crowd doing a "Mexican wave" at a cricket ground in Mumbai. Each spectator stands up and sits down in turn. Nobody walks around the stadium, yet the wave races round it. That is a good model of a transverse wave: up-and-down motion, sideways travel.
Common examples:
- Waves on a rope or a guitar string. Each part of the string moves at right angles to the string.
- Ripples on water. At this level, treat them as transverse.
- Electromagnetic waves, including light, radio and X-rays. Here no particles vibrate at all. Electric and magnetic fields change, at right angles to the direction of travel. That is why light can cross the vacuum of space.
- Seismic S-waves (secondary waves) from earthquakes.
The high points of a transverse wave are crests (or peaks), and the low points are troughs.
What vibrates in a longitudinal wave?
Sound is the most important example. A loudspeaker cone moves forwards and squashes the layer of air in front of it, making a compression, where the pressure is a little higher than normal. Then the cone moves back, leaving a rarefaction, where the air is spread out and the pressure is a little lower. The cone repeats this many times each second. Each layer of air passes the pattern on to the next, while the air molecules themselves only shuffle back and forth along the direction of travel.
Other examples are ultrasound and seismic P-waves (primary waves). Because sound needs particles to pass on the vibrations, it cannot travel through a vacuum. A ringing phone in a sealed jar goes almost silent as a pump removes the air.
| Feature | Transverse | Longitudinal |
|---|---|---|
| Direction of vibration | At right angles to the direction of travel | Parallel to the direction of travel |
| What you see | Crests and troughs | Compressions and rarefactions |
| One wavelength | Crest to the next crest | Middle of one compression to the middle of the next |
| Examples | Light, radio, ripples, S-waves | Sound, ultrasound, P-waves |
To compare the two types, open the simulation of both wave types.
How do we know waves carry energy but not matter?
Here are three pieces of evidence you can describe in an exam:
- A cork on a pond. Drop a cork, or a leaf, into still water and make ripples nearby. As the ripples pass, the cork bobs up and down. It does not drift away with them.
- A ribbon on a slinky. Tie a small ribbon to one coil and send compressions along the slinky. The ribbon jiggles back and forth about the same spot, while the compressions reach the far end.
- A candle in front of a loudspeaker. Play a loud, low note and the flame flickers to and fro. It is not blown steadily away, so the air is not flowing out of the speaker.
The energy really does arrive, though. Storms far out in the Atlantic Ocean send swells that break on beaches in Portugal days later. The water that reaches the shore did not cross the ocean; the energy did.
What are displacement–distance and displacement–time graphs?
Displacement is how far a point on the wave is from its rest position, with a sign to show which way. Wave graphs always have displacement on the y-axis. The x-axis is what tells you which graph you have.
- A displacement–distance graph is like a photograph. It shows the whole wave at one instant, with distance along the wave on the x-axis. From it you can read the wavelength: the length of one complete cycle, such as crest to crest.
- A displacement–time graph is like a video of one single point. It shows how that point moves as time passes, with time on the x-axis. From it you can read the period: the time for one complete cycle.
You can read the amplitude from either graph. It is the largest displacement from the rest line, measured from the middle to a crest.
For a longitudinal wave, the graphs look exactly the same. Displacement then means how far a particle has moved forwards or backwards along the direction of travel.
Worked example 1: reading the wavelength
A displacement–distance graph for a wave on a rope shows exactly 3 complete waves between 0 and 4.5 m. The crests reach +8.0 cm and the troughs reach −8.0 cm. Find the wavelength and the amplitude.
Given: 3 complete waves in 4.5 m, crests at +8.0 cm
Wavelength: length covered ÷ number of waves = 4.5 m ÷ 3
Answer: λ = 1.5 m
Amplitude: from the rest line to a crest, so A = 8.0 cm, or 0.080 m. The 16 cm from crest to trough is twice the amplitude.
Measuring across several waves and dividing gives a more accurate answer than measuring just one.
Worked example 2: reading the period
A wave buoy off the coast of Sri Lanka records how high it is above its mean level. Its displacement–time graph shows 6 complete cycles in 48 s, with crests at +1.2 m. Find the period, the frequency and the amplitude.
Given: 6 cycles in 48 s, crests at +1.2 m
Period: time ÷ number of cycles = 48 s ÷ 6, so T = 8.0 s
Equation:
Substitution:
Answer: f = 0.125 Hz, about 0.13 Hz, and the amplitude is 1.2 m.
Worked example 3: using both graphs together
For a wave on a stretched string, the displacement–distance graph shows a wavelength of 0.40 m. The displacement–time graph for one point on the string shows 2 complete cycles in 0.10 s. Find the speed of the wave.
Period: 0.10 s ÷ 2 = 0.050 s, so Hz
Equation:
Substitution:
Answer: v = 8.0 m/s
You need the distance graph for λ and the time graph for f. For more practice with this equation, see the wave equation guide.
Seen from above, the crests of water ripples form lines called wavefronts, and the gap between neighbouring wavefronts is one wavelength. To explore wavefronts further, open the ripple tank simulation.
Common mistakes
- Mixing up the two directions. Transverse means across the direction of travel. Longitudinal means along it.
- Taking the wavelength from a time axis. A repeat on a time axis is the period.
- Doubling the amplitude. Measure from the rest line, not from trough to crest.
- Saying sound particles travel from the source to your ear. They only shuffle back and forth.
- Marking one wavelength as compression to rarefaction. That is only half a wavelength.
- Describing sound in air with crests and troughs. In the air itself, sound is a pattern of compressions and rarefactions.
Key points
- Waves transfer energy from place to place without carrying the material with them.
- Transverse: vibrations at right angles to the direction of travel, with crests and troughs.
- Longitudinal: vibrations parallel to the direction of travel, with compressions and rarefactions.
- A cork on ripples and a ribbon on a slinky both stay in place as the wave passes.
- A displacement–distance graph gives the wavelength; a displacement–time graph gives the period. Both give the amplitude.
- Always check the x-axis before reading a value from a wave graph.