Skip to content

Electricity simulation

Static Electricity and Electric Fields Simulation

Charge a polythene, acetate or glass rod or a balloon by rubbing and watch the electrons hop across. Bring it near paper, water, a hanging rod, a wall or a gold-leaf electroscope, then switch to Fields to trace field lines round charges and plates and watch sparks jump.

Loading simulation…
Show symbols for

Predict first

Question 1 of 4

A polythene rod is rubbed with a dry cloth and becomes charged. What has happened?

Try this

  1. 1With the Polythene rod and Bits of paper, press Rub six times and watch the blue − symbols hop from the cloth onto the rod. Then press Near and count the bits that jump. Press Away, rub six more times and try again.
  2. 2Choose A hanging charged rod from the Bring it near menu. Rub the polythene rod a few times and press Near. Then pick Acetate (+) for the Hanging rod and compare. Did the rods ever need to touch?
  3. 3Choose A gold-leaf electroscope, rub the rod and press Near: the leaf rises with no contact. Press Earth, press Earth again to lift the finger, then press Away. What sign of charge does the electroscope keep?
  4. 4Switch to Fields and choose Parallel plates. Drag the test charge round the space between the plates, then out past one end. Watch the arrow and the Force on it card.
  5. 5Choose Spark gap and keep an eye on the Spark meter as you drag one ball slowly towards the other. Roughly how wide is the gap when the spark jumps, and what charge is left on each ball?

Two parts in one simulation

Use the switch at the top of the panel to move between two views. Charging shows a lab bench from the side, with something to rub, a cloth to rub it with, and an object to test it on. Fields shows charged metal balls from above, with the electric field lines that surround them.

Rubbing moves electrons

Every material starts with equal numbers of protons and electrons, so it carries no overall charge. When two different insulators are rubbed together, electrons are dragged from one surface to the other. In the simulation each stroke sends a blue electron symbol hopping across, and each + or − symbol stands for five nanocoulombs. Polythene and the balloon pull electrons in and turn negative. Acetate and glass give them up and turn positive. Look at the Total charge card: it stays at zero, because charge is only moved from place to place, never created or destroyed.

Pushes and pulls without contact

Hang a rubbed rod from a thread and bring a second charged object close. If both carry the same sign of charge, the hanging rod is pushed away. If the signs differ, it is drawn in. The force acts across the gap, and it fades quickly as you drag the rod further off.

Uncharged things are attracted too. A charged rod shifts the electrons inside a bit of paper, so the side facing the rod ends up with the opposite charge. That side is nearer, so its pull wins and the bit leaps up. A stream of water bends towards the rod for a similar reason, and a balloon with enough charge stays up on a wall.

Insulators, conductors and earthing

The rods are insulators, so their charge stays where the cloth put it. An earthed wire touching one end removes only the charge at that end, and any paper clinging further along stays put. The cap, stem and leaf of the gold-leaf electroscope are metal, so electrons can move through them. Hold a charged rod near the cap and electrons shift between the cap and the leaf, so the leaf and stem carry the same charge and repel: the leaf rises. Earthing the cap lets electrons pass to or from the ground. Remove the earth before the rod and the electroscope keeps a charge opposite to the rod's.

Field lines and the test charge

An electric field is the space around a charge where another charge feels a force. Each line here is traced in small steps along the push on a tiny positive charge, adding up the effects of every charge in the picture. Arrows run away from positive charges and into negative ones, and the lines spread apart where the field grows weaker. The small yellow + is a positive test charge (the Test button shows or hides it): drag it round to see the force at each point.

Plates, sparks and sharp points

Between a pair of oppositely charged plates the lines run straight and evenly spaced, so the field is uniform; near the ends they curve outwards. When the field across a gap reaches roughly three million volts per metre, dry air starts to conduct and a spark jumps. On a conductor with a sharp point, the point has by far the strongest field, so it leaks charge into the air first.

What the model leaves out

The balls are treated as point charges, which ignores the way nearby conductors shift each other's charge. Real rubbing depends on how clean and dry the surfaces are, and the breakdown value of air varies with its pressure and dampness.

Check your understanding

8 questions

  1. 1.What moves when a polythene rod is charged by rubbing it with a cloth?
  2. 2.After rubbing, an acetate rod carries +20 nC. What charge does the cloth now carry?
  3. 3.Why do tiny bits of uncharged paper jump up to a charged rod?
  4. 4.Which way does an electric field line point at any place?
  5. 5.A small test charge is moved further away from a charged metal ball. What happens to the force on it?
  6. 6.What is the field like between two oppositely charged parallel plates, away from their ends?
  7. 7.Why does touching the cap of a charged gold-leaf electroscope make its leaf fall?
  8. 8.When does a spark jump between two charged objects?

For teachers

Embed it in your site or open it full-screen for the projector.

Read more