Skip to content

Electric Field Patterns: How to Draw Field Lines Round Charges, Spheres and Plates

Learn the rules every electric field line obeys, how to draw the patterns for a point charge, a charged sphere, parallel plates and pairs of charges, how the field weakens with distance, and why sparks start at sharp points. With worked examples.

Published · 8 min read

On this page

An electric field line gives the direction of the force on a small positive charge placed on it. So the arrows lead away from positive charges and into negative charges. Two lines never cross, and where the lines are closer together the field is stronger.

With those rules, you can draw every pattern you need:

  • A point charge or a charged sphere: straight lines spreading out from the centre like spokes, outwards for +, inwards for −.
  • Two oppositely charged parallel plates: straight, parallel, evenly spaced lines from the + plate to the − plate. The field in the middle is uniform, and the lines bulge outwards near the ends.
  • Two charges near each other: curved lines that link opposite charges, or push apart between like charges.

What does an electric field line tell you?

Wherever a second charge would be pushed or pulled by a charged object, there is an electric field. Field lines are a map of it, and every line follows the same rules:

  1. Direction. The arrow shows which way a small positive "test" charge would be pushed. A negative charge feels a force the opposite way.
  2. Start and finish. Lines leave positive charges and arrive at negative ones. With only one charge, they run off towards the edge of the page.
  3. No crossing. A charge at a crossing would be pushed two ways at once, which is impossible. The field has one direction at each point.
  4. Spacing. Crowded lines mean a strong field. Spread-out lines mean a weak one.
  5. Conductors. Lines meet the surface of a charged metal object at right angles.

A useful habit: draw lines in proportion to the charge. A charge of +2Q gets twice as many lines as +Q.

What is the field around a point charge or a charged sphere?

Around a single point charge, the lines are straight and radial: they point straight out from the charge, evenly spaced all the way round. A positive charge has its arrows pointing outwards. A negative charge has them pointing inwards.

A charged metal sphere has the same pattern outside it, as if all its charge sat at the centre. The difference is in where you start the lines. The charge sits on the outer surface of the metal, so each line begins on the surface, at right angles to it. Inside the sphere there is no field, so draw nothing there.

Worked example 1: drawing the field of a charged dome

A school Van de Graaff generator in Nairobi gives its metal dome a negative charge. Draw the field around the dome.

  1. Draw the dome as a circle.
  2. Draw at least eight straight lines, evenly spaced, each touching the surface and running straight out along a line from the centre.
  3. Put the arrows on the lines pointing inwards, towards the dome, because a positive test charge would be pulled towards a negative charge.
  4. Leave the inside empty and keep the lines straight. They spread further apart as they go out, which shows the field getting weaker.

How does the field strength change with distance?

The field is strongest right next to the charge and gets weaker further out. The picture shows why. The same number of lines leaves the charge, but further out they share a much bigger sphere, so they are more widely spaced.

For a point charge, the strength follows an inverse-square law. This goes beyond GCSE and IGCSE, but the Punjab Class 10 book uses it. Double the distance and the field falls to a quarter. Triple it and the field falls to a ninth. The force on a second charge depends on the field it sits in, so charged objects push or pull harder when they are closer.

Worked example 2: the field at three distances

A small metal ball carries a charge of +2.0+2.0 nC. Find the field strength 5.0 cm, 10 cm and 15 cm from its centre. Use E=kQr2E = \dfrac{kQ}{r^2} with k=9.0×109k = 9.0 \times 10^9 N m²/C².

At 5.0 cm: E=9.0×109×2.0×10−90.0502=180.0025=7200E = \dfrac{9.0 \times 10^9 \times 2.0 \times 10^{-9}}{0.050^2} = \dfrac{18}{0.0025} = 7200 N/C

At 10 cm: twice as far, so the field is 720022=1800\dfrac{7200}{2^2} = 1800 N/C

At 15 cm: three times as far, so the field is 720032=800\dfrac{7200}{3^2} = 800 N/C

Answer: 7200 N/C, 1800 N/C and 800 N/C. Moving just 10 cm further away makes the field nine times weaker.

What does the field between two parallel plates look like?

Give one metal plate a positive charge and a parallel plate an equal negative charge. Between them, away from the edges, the field is uniform: it has the same strength and the same direction at every point. A charge placed anywhere in the middle feels the same force.

To draw it:

  1. Draw straight lines from the + plate to the − plate, at right angles to both.
  2. Space them evenly, to show that the strength is the same everywhere.
  3. Put all the arrows from + to −.
  4. Near the ends of the plates, curve the outer lines outwards. These edge effects show the field weakening and spreading out past the ends. Outside the plates, away from the ends, the field is very weak, so draw no lines there.

What do the fields of two charges look like?

These patterns go beyond the AQA and Cambridge lists, but they show the rules in action.

  • A positive and a negative charge: lines leave the + charge and curve round to end on the − charge. The field is strong in the gap, where the lines crowd together. Halfway between them, it points straight from the + side to the − side.
  • Two equal positive charges: the lines bend away from each other, as if the two sets of lines repel. Exactly halfway between the charges, their fields cancel. At this neutral point there is no field at all, so a test charge placed there feels no force.

Why do sharp points spark first?

On a charged metal object, the charges spread over the surface, but they do not spread evenly. They crowd together where the surface curves most sharply. So the field just outside a sharp point or edge is far stronger than the field beside a smooth, rounded part.

Air is normally an insulator. But in dry air, a field of roughly 3×1063 \times 10^6 V/m (the same as N/C) speeds up the few free electrons in the air so much that they knock more electrons out of air molecules. The air is ionised and starts to conduct. Charge then leaks away, often with a faint glow and a hiss called corona discharge, or jumps across a gap as a spark. A sharp point reaches this field long before a rounded dome does. This is why high-voltage equipment has smooth, rounded ends, and why charge leaks quickly from sharp points.

Worked example 3: the p.d. behind a spark

After a student in Toronto walks across a carpet, a spark jumps 4.0 mm from a fingertip to a metal door handle. Treat the gap like a pair of plates, where the field is the p.d. divided by the gap: E=VdE = \dfrac{V}{d}. Estimate the p.d.

Rearrange: V=EdV = Ed

Substitution: V=3.0×106×0.0040V = 3.0 \times 10^6 \times 0.0040

Answer: about 12 000 V. The p.d. is huge, but the charge involved is tiny, so the spark stings but is usually harmless to people. Near petrol vapour or flour dust, though, even a small spark can start a fire, which is why fuel tankers are earthed.

Explore the patterns with the static electricity and fields simulation. Switch Part to Fields, then step through One positive charge, Parallel plates, Positive and negative and Two positive charges, and check each picture against the rules above. In Two positive charges, the neutral point is marked with a cross. Then choose Sharp point and raise the charge to see where the air breaks down first.

Common mistakes

  • Reversed arrows. Lines run out of + and into −, because they show the force on a positive charge.
  • Lines that cross or touch. Each point has one field direction.
  • Curved lines round a single sphere. They are straight and radial, and they meet the surface at right angles.
  • Drawing lines inside a charged metal sphere. The field inside it is zero.
  • Uneven lines between plates. In the middle, space them evenly to show a uniform field.
  • Thinking a bigger object always sparks first. The sharpest part sparks first, because the field is strongest there.

Key points

  • Field lines show the direction of the force on a small positive charge: away from +, towards −.
  • Lines never cross. Closer lines mean a stronger field.
  • A point charge or charged sphere has a radial field that weakens with distance, falling to a quarter when the distance doubles.
  • Between oppositely charged parallel plates the field is uniform, with edge effects at the ends.
  • Charge crowds at sharp points, so the field there is strongest and the air breaks down first.