An original Labverse practice paper — not an official exam paper
Punjab Board Class 9 Physics
Punjab Class 9 Physics Subjective practice paper B
Written by Labverse from our own exam-style questions, to the same time and total marks as Punjab BISE boards’ Subjective, on the same topics. It is not set, checked or endorsed by Punjab BISE boards.
- Time allowed
- 1 hour 45 minutes
- Total marks
- 48
- Questions
- 9
- Level
- Not tiered
Instructions
- Answer every question. Work in one sitting and stop when the time is up.
- The marks for each part are shown beside it. Use them to judge how much to write.
- Show your working for calculations and give the unit with every answer.
To print the answers too, open the mark scheme at the end first.
Marks by topic
- Physical quantities and measurements · 5 marks
- Kinematics · 4 marks
- Dynamics · 14 marks
- Turning effects of force · 6 marks
- Work, energy and power · 5 marks
- Mechanical properties of matter · 8 marks
- Magnetism · 6 marks
Questions
- Question 1 (5 marks)Prefixes and scientific notation
Scientific notation is a short way of writing very large and very small numbers.
(a)Write in scientific notation: (i) 93 000 000 m (ii) 0.000 46 kg
[2](b)A student writes 0.000 46 kg as 0.46 × 10⁻³ kg. Explain why this is not scientific notation, and correct it.
[2](c)Write 7.05 × 10⁻³ s as an ordinary number.
[1]
- Question 2 (4 marks)Speed–time graphs
Speed–time graphs are used to study the motion of vehicles.
(a)What does the gradient of a speed–time graph represent?
[1](b)What does the area under a speed–time graph represent?
[1](c)Describe the speed–time graph of a body moving with constant speed, and state its acceleration.
[2]
- Question 3 (7 marks)Newton's law of gravitation
Answer these short questions on gravitation.
(a)State Newton's law of gravitation.
[2](b)Write the value and the SI unit of the constant of gravitation G.
[2](c)Why is the gravitational force called a field force?
[1](d)Two books lie side by side on a desk but do not move towards each other. Explain why.
[2]
- Question 4 (4 marks)Newton's second law
Newton's second law links force, mass and acceleration.
(a)State Newton's second law of motion.
[2](b)Define the newton, the SI unit of force.
[2]
- Question 5 (3 marks)Conservation of momentum
The principle of conservation of momentum is used to solve collision problems.
(a)State the principle of conservation of momentum.
[2](b)What is meant by an isolated system?
[1]
- Question 6 (6 marks)Torque (moment of force) and couple
A plumber turns the round handle of a valve using both hands. The hands are 0.24 m apart, on opposite sides of the centre, and each pushes with a force of 30 N at right angles to the line joining the hands, in opposite directions.
(a)What is meant by a couple?
[2](b)State the resultant force on the handle and explain why the handle still turns.
[2](c)Extension (beyond the textbook): calculate the torque of the couple.
[2]
- Question 7 (5 marks)Power
The engine of an auto-rickshaw provides a constant forward force of 600 N. The rickshaw travels 150 m along a level road in 20 s, moving the same way as the force.
(a)Find the work done by the forward force.
[2](b)Calculate the power developed by the engine. Give your answer in kW.
[2](c)Express this power in horsepower.
[1]
- Question 8 (8 marks)Barometers and manometers
On a day of standard pressure, the mercury (ρ = 13 600 kg m⁻³) in a barometer stands 760 mm high. A second barometer is filled with an oil of density 850 kg m⁻³.
(a)Calculate the height of the oil column on the same day.
[3](b)Explain why mercury, rather than water or oil, is used in a simple barometer.
[2](c)The mercury barometer tube is tilted away from the vertical. What happens to the vertical height of the mercury column?
[1](d)Some air gets trapped above the mercury. How does this affect the reading? Explain.
[2]
- Question 9 (6 marks)Uses of magnets and electromagnets
A magnetic relay is used to switch on a large motor in a factory.
(a)Describe how the relay works. You may draw a labelled diagram.
[4](b)Give the reason why the relay's input circuit carries only a low current.
[1](c)What happens when the input circuit is switched OFF?
[1]
End of practice paper · 48 marks in total
Mark schemeOpen it only after you have finished the paper.ShowHide
Question 1 (5 marks)
(a)(i) 9.3 × 10⁷ m (ii) 4.6 × 10⁻⁴ kg [2]
- 9.3 × 10⁷ m
- 4.6 × 10⁻⁴ kg
(b)There must be one non-zero digit before the decimal point, but 0.46 has a zero there. Correct form: 4.6 × 10⁻⁴ kg. [2]
- One non-zero digit must come before the decimal point (0.46 is less than 1)
- 4.6 × 10⁻⁴ kg
(c)0.00705 s [1]
- 0.00705 s
Revise: Prefixes and scientific notation · Significant figures, prefixes and units trainer simulation
Question 2 (4 marks)
(a)The acceleration of the body. [1]
- Acceleration
(b)The distance covered by the body. [1]
- Distance covered
(c)A horizontal straight line above the time axis (parallel to it). The gradient is zero, so the acceleration is zero. [2]
- Horizontal straight line parallel to the time axis
- Acceleration is zero
Revise: Speed–time graphs · Motion graphs simulation
Question 3 (7 marks)
(a)Every body in the universe attracts every other body with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centres. [2]
- force directly proportional to the product of the two masses
- inversely proportional to the square of the distance between their centres
(b)G = 6.67 × 10⁻¹¹ N m² kg⁻² [2]
- 6.67 × 10⁻¹¹
- N m² kg⁻²
(c)It acts across a gap, with no contact: each mass has a gravitational field around it, and another mass in that field feels the force. [1]
- it acts without contact, through the gravitational field around a mass
(d)The gravitational force between them is extremely small, because G is tiny and the masses of the books are small. It is far smaller than the friction between the books and the desk, so they do not move. [2]
- the force is tiny because G (and the masses) are very small
- friction is much larger than this force, so the books stay at rest
Revise: Newton's law of gravitation · Orbits and gravity simulation
Question 4 (4 marks)
(a)A net force acting on a body gives it an acceleration in the direction of the net force. This acceleration is directly proportional to the net force and inversely proportional to the body’s mass. [2]
- A net force produces acceleration in the direction of the force
- a is directly proportional to F and inversely proportional to m
(b)1 N is the net force needed to accelerate a 1 kg mass at 1 m s⁻². So 1 N = 1 kg m s⁻². [2]
- Net force that accelerates a 1 kg mass at 1 m s⁻²
- 1 N = 1 kg m s⁻²
Revise: Newton's second law · Force, mass and acceleration (F = ma) simulation
Question 5 (3 marks)
(a)The total momentum of an isolated system stays constant, provided no external force acts on it. So the total momentum before a collision equals the total momentum after it. [2]
- No external force acts (isolated system)
- Total momentum before = total momentum after (stays constant)
(b)A system (group of bodies) on which no external force acts. [1]
- A system on which no external force acts
Revise: Conservation of momentum · Momentum and collisions simulation
Question 6 (6 marks)
(a)Two equal and opposite parallel forces acting at two different points of the same body (along different lines of action) form a couple. [2]
- Two equal, opposite, parallel forces
- Acting at different points of the same body (different lines of action)
(b)The resultant force is zero because the two forces are equal and opposite. Both forces turn the handle the same way, so their torques add and there is a net torque. [2]
- Resultant force is zero
- The torques of both forces act in the same sense and add, so the handle rotates
(c)τ = F × d = 30 × 0.24 = 7.2 N m. [2]
- τ = F × d (perpendicular distance between the forces)
- 7.2 N m
Revise: Torque (moment of force) and couple · Principle of moments simulation
Question 7 (5 marks)
(a)W = FS = 600 N × 150 m = 90 000 J. [2]
- W = FS = 600 × 150
- 90 000 J
(b)P = W/t = 90 000 J ÷ 20 s = 4500 W = 4.5 kW. [2]
- P = 90 000 ÷ 20 = 4500 W
- 4.5 kW
(c)4500 ÷ 746 = 6.03 hp. [1]
- 4500 ÷ 746 = 6.03 hp
Revise: Power · Power and efficiency simulation
Question 8 (8 marks)
(a)Both columns balance the same pressure, so ρ(oil) × g × h(oil) = ρ(Hg) × g × h(Hg). h(oil) = 13 600 × 0.760 ÷ 850 = 12.2 m. [3]
- ρ(oil) g h(oil) = ρ(Hg) g h(Hg), so g cancels
- h(oil) = 13 600 × 0.760 ÷ 850
- 12.2 m
(b)Mercury is very dense, so a short column of about 0.76 m balances the air pressure. A water or oil barometer would have to stand over 10 m high, far too tall for a laboratory. [2]
- Mercury has a very high density, so the column is short (about 0.76 m)
- Water or oil would need an impractically tall tube (over 10 m)
(c)It stays the same, about 760 mm; the mercury simply fills a longer length of the tube. [1]
- Vertical height unchanged (mercury fills more of the tube's length)
(d)The column becomes shorter. The trapped air presses down on the top of the mercury, so a shorter column is enough to balance atmospheric pressure, and the barometer reads too low. [2]
- The column becomes shorter (the reading is too low)
- Trapped air exerts pressure on top of the column
Revise: Barometers and manometers · Atmospheric pressure and altitude simulation
Question 9 (6 marks)
(a)Switching ON the input circuit sends a small current through the electromagnet's coil. This attracts the pivoted iron armature, which turns about its pivot so that its other end pushes the springy metal contacts together. This switches ON the high-current circuit, and the motor runs. [4]
- A small current in the input circuit flows through the electromagnet
- The pivoted iron armature is pulled towards the electromagnet
- The armature turns and pushes the contacts together
- The high-current circuit is switched ON (the motor runs)
(b)Safety: the person working the switch never handles the high-current circuit. [1]
- For safety
(c)The electromagnet loses its magnetism, the armature is released and the contacts separate, so the motor stops. [1]
- The armature is released and the contacts open (the motor stops)
Revise: Uses of magnets and electromagnets · Magnetic field around a wire and solenoid simulation