Skip to content

Matter and pressure simulation

Atmospheric Pressure and Altitude Simulation

Climb from sea level to 15 km and watch the air pressure, the air density and the weight of air overhead all fall. Then read a mercury barometer, compare it with a water barometer, crumple a steaming can and find a gas pressure with a U-tube manometer.

Loading simulation…
Show symbols for

Predict first

Question 1 of 4

A crisp packet is sealed at sea level and carried up to a mountain hut 3 km above sea level, kept at the same temperature all the way. What happens to the packet?

Try this

  1. 1Press Play and let the balloon rise. Note the Air pressure readout as it passes 3 km, 6 km and 9 km. Does every 3 km of climbing remove the same amount of pressure?
  2. 2Choose Everest, 8.8 km from the Go to… menu. Compare the Weight of air above each square centimetre with the 10.1 N it reads at sea level, and watch what the crisp packet does.
  3. 3Pick Barometer from the scene menu and press Play to take out the stopper. Multiply the height of the 760 mm column by 13 600 kg/m³ and by g, compare your answer with the Air pressure readout, then switch on Compare with a water barometer.
  4. 4Pick Collapsing can. Press Heat, wait until the status line says the water is boiling, let it boil for a few more seconds, then press Seal and Cool. When the can stops crumpling, work out the mass whose weight equals the Push on the front face, then check it against the note in the Working box.
  5. 5Pick Manometer and press Play to open the tap. Read the level difference on the scale, use gas pressure = atmospheric pressure + hρg, and compare your answer with the Gas pressure readout.

One push, four views

Above your head stands a layer of air many kilometres deep. Its molecules hit everything around us, and those countless collisions add up to atmospheric pressure: about 1.0×1051.0 \times 10^5 Pa at sea level, or roughly 10 N on every square centimetre. This simulation looks at that push in four scenes, chosen from the menu beside Play.

Climbing through the air

The tall box on the left is a column of air standing on a small patch of sea. Its dots are packed most tightly at the bottom, because the air there is squashed by the weight of everything above it. Press Play and a weather balloon rises past a high city, the summit of Everest and an airliner's cruising height.

As the balloon climbs, the part of the column above it shrinks, and so does the orange arrow showing its weight. Fewer molecules per cubic metre means fewer collisions each second, so the pressure falls. The Weight of air above card makes the link exact: in still air, the pressure at a height equals the weight of the air above each square metre.

The fall is not steady. The first 3 km of climbing removes about 31 kPa, but the stretch from 6 km to 9 km removes only about 16 kPa. Half of all the air lies below 5.5 km, and on Everest only about a third of it remains overhead.

A sealed crisp packet rides along. Its gas keeps pushing out while the air outside pushes in less and less, so the packet swells until its plastic is stretched tight.

Weighing the sky with a barometer

Fill a metre-long glass tube with mercury, stopper it and turn it over so its open end sits under the mercury in a dish. Remove the stopper and the column drops, leaving almost a vacuum at the top. It stops when its own pressure matches the push of the air on the dish. Points A and B are level in the same mercury, so they share one pressure. At standard pressure the column stands 760 mm tall, and p=hρgp = h \rho g with 13 600 kg/m³ and 9.8 N/kg turns that height back into about 1.01×1051.01 \times 10^5 Pa. Carry the barometer up the mountain and the column shortens. A water column would need to be 13.6 times taller, so it is drawn beside a house to show its size.

Crushing a can

Heat a little water in an open can and steam drives most of the air out of the neck. Seal it and pour on cold water: the steam condenses into a few drops, and the pressure inside collapses. Nothing inside pulls. The air outside simply pushes harder than the thin gas left inside, and the force on one face equals the pressure difference times its area, often several thousand newtons.

Reading a gas supply

A U-tube manometer compares a gas with the air. The side with the higher pressure pushes its liquid down. If the open arm stands h higher, the gas pressure is atmospheric pressure plus hρgh \rho g; if it stands lower, subtract instead.

For more on that equation, open the liquid pressure simulation, and to see how particles create gas pressure in a closed box, try the gas laws simulation.

Equations

  • Pressure

    p=FA

    pressure = force normal to a surface ÷ area of that surface

    Open calculator →
  • Pressure in a liquid

    p=hρg

    pressure due to a column of liquid = height of column × density of liquid × gravitational field strength

    Open calculator →

Check your understanding

8 questions

  1. 1.Why is the air pressure lower at the top of a mountain than at sea level?
  2. 2.What causes the pressure that the air exerts on a surface?
  3. 3.A mercury barometer's column is 0.75 m tall. Use 13 600 kg/m³ for the density of mercury and 9.8 N/kg for g. Find the air pressure.
  4. 4.What is in the space above the mercury at the closed top of a barometer tube?
  5. 5.The air outside a sealed can is at 100 kPa and the gas inside is at 20 kPa. One face of the can has an area of 0.03 m². What is the resultant force of the gases on that face?
  6. 6.A gas supply is joined to one arm of a water manometer. The water in the open arm stands 0.20 m higher than in the gas arm. Air pressure is 101 000 Pa and g is 9.8 N/kg. What is the gas pressure?
  7. 7.Which statement about the Earth's atmosphere is correct?
  8. 8.Why would a water barometer need a much taller tube than a mercury barometer?

For teachers

Embed it in your site or open it full-screen for the projector.