Skip to content

Thermal physics simulation

Particle Model and States of Matter Simulation

A sealed box of 100 particles that pull on and push against each other. Heat it or cool it and a solid, a liquid and a gas form on their own, while live readings split the internal energy into kinetic and potential parts.

Loading simulation…
Show symbols for

Predict first

Question 1 of 4

A cold solid in a sealed box is heated at a steady rate. While it is melting, where does most of the energy from the heater go?

Try this

  1. 1Keep the starting set-up (Start from Solid, Heater power Medium) and press Play, then Heat. Watch the Temperature against time graph as the regular pattern breaks up. Where does the line become flatter?
  2. 2While the State card says Changing state, look at the Energy against time graph. Which line climbs steeply, Total KE or Total PE? Compare the Average kinetic energy card before and after.
  3. 3Press Track and keep heating. Describe the path of the ringed particle in the solid, in the liquid and once it has escaped as a gas.
  4. 4Choose Gas under Start from, press Cool and wait. Watch the Space taken up card as the particles gather into a lump. How many times denser than the gas is the lump?
  5. 5Choose Brownian motion under View. Press Play, then press Heat twice. Does the smoke particle jiggle about faster in warmer air?

A sealed box you can heat and cool

The simulation shows a flat, sealed glass box holding 100 particles on a heater plate. Every pair of particles attracts when they are a short distance apart and pushes back hard when squeezed together. That single rule is all the program knows. The regular solid, the liquid lump and the spread-out gas are not drawn in by hand: they appear by themselves as energy is added or taken away.

Colour shows speed: blue particles are slow and red ones are fast. Faint lines join close neighbours, so the bonds in a solid show up clearly. A thermometer stands on the left and a bar on the right shows the internal energy, split into its kinetic and potential parts.

Arrangement and motion in each state

Start from the cold solid and the particles sit in neat rows, each one trembling about its own spot. Press Track to ring one particle and draw its path: in the solid the path is a tiny scribble. Heat the box and the rows break up. The particles still touch, but now they jostle and swap places, so the tracked path wanders through the lump. Keep heating and particles escape one by one until every particle flies freely across the box, changing direction only when it meets a wall or another particle.

Where the heater's energy goes

The heater adds energy at a steady rate, so the time axis of each graph also measures the energy supplied. While the solid warms, the particles vibrate harder. The energy is shared between kinetic energy (faster motion) and potential energy (bonds stretched and squashed further), and the temperature climbs quickly. Once the pattern starts to collapse, the temperature line becomes much flatter. The energy graph shows why: Total PE shoots up while Total KE barely moves. The energy is working against the attraction between particles, pulling them apart, rather than speeding them up. In the gas the reverse happens, and almost all of the energy becomes kinetic energy.

Temperature and the motion of particles

The thermometer reads the average kinetic energy of the particles over the last second. On the model scale used here, temperature is proportional to that average, just as it is on the kelvin scale. Double the average kinetic energy and the reading doubles. Zero on both scales is absolute zero. Nothing can be colder, and the particles' kinetic energy is as small as it can be.

Density and conservation of mass

Cooling a gas makes the particles gather into a lump, first as a liquid and then as a solid. The number of particles never changes, so the mass is the same in every state. The Space taken up card shows how much of the box the lump fills. The same mass squeezed into less space has a higher density, which is why solids and liquids are so much denser than gases.

Evidence that particles move

Switch the view to Brownian motion. A large smoke particle hangs in air whose molecules are too small to see. They keep striking it unevenly, so it jerks about along a random path that its trail records. Warmer air means faster molecules and a livelier dance.

To read heating curves with real substances and E = mL, try the latent heat simulation. To explore how moving particles create gas pressure, open the gas laws simulation.

Equations

Check your understanding

8 questions

  1. 1.Which statement describes the particles in a solid?
  2. 2.A substance is melting while energy is supplied at a steady rate. What happens to its temperature and its internal energy?
  3. 3.What is the internal energy of a substance?
  4. 4.The average kinetic energy of the particles in a gas doubles. What happens to its temperature measured in kelvin?
  5. 5.A 100 g block of ice melts completely in a sealed bag. What is the mass of the water?
  6. 6.Why is a gas far less dense than the same substance as a liquid?
  7. 7.Seen through a microscope, tiny bits of smoke drifting in air dart about at random. What causes this?
  8. 8.Which change of state happens when the particles of a liquid slow down and settle into fixed places in a regular pattern?

For teachers

Embed it in your site or open it full-screen for the projector.

Read more