Skip to content

Moments and the Principle of Moments: See-Saws, Spanners and Balanced Beams

Calculate the moment of a force, use the principle of moments to balance see-saws and beams, and see how the centre of mass decides whether an object stays upright or topples.

Published · 8 min read

On this page

A moment is the turning effect of a force. It depends on the size of the force and on how far from the pivot the force acts:

M=FdM = F d

Here M is the moment in newton metres (N m), F is the force in newtons (N) and d is the perpendicular distance from the pivot to the line of action of the force, in metres (m). The pivot is the point that the object turns about.

The principle of moments says that when an object is balanced, the total clockwise moment about a point equals the total anticlockwise moment about the same point. This is how a see-saw balances. It also lets you find an unknown force or distance on a balanced beam.

What is a moment?

Think about opening a door. You push on the handle, far from the hinges. If you pushed close to the hinges instead, you would need a much larger force. The door turns about the hinges, so the hinges are the pivot.

You get a larger moment from:

  • a larger force, or
  • a larger distance between the pivot and the line of the force.

This is why spanners have long handles and why door handles are fixed far from the hinges.

Different courses use different names and letters. Some textbooks in Pakistan call the turning effect torque, written τ, and call the perpendicular distance the moment arm, written ℓ. Many US courses also use τ. The idea is the same.

The unit is the newton metre (N m). If the distance is in centimetres, the moment comes out in N cm. Do not write the unit as joules, and do not confuse N m with N/m, the unit of a spring constant.

Worked example 1: a spanner

A mechanic in Lagos pushes on a spanner with a force of 40 N. The force acts at right angles to the spanner, 0.25 m from the centre of the nut. Find the moment. Then find the force needed for the same moment with a spanner only 0.10 m long.

Given: F = 40 N, d = 0.25 m

Equation: M=FdM = Fd

Substitution: M=40×0.25M = 40 \times 0.25

Answer: M = 10 N m

Shorter spanner: F=Md=100.10=100 NF = \dfrac{M}{d} = \dfrac{10}{0.10} = 100\ \text{N}

The shorter spanner needs two and a half times the force for the same turning effect.

Why must the distance be perpendicular?

The distance in M = Fd is measured from the pivot to the line of action of the force, at right angles to that line. If a force acts along a line that passes through the pivot, the perpendicular distance is zero. Then there is no moment at all. This is why pushing a door straight towards its hinges does not open it.

If you push at an angle, the perpendicular distance is shorter than the distance along the object, so the moment is smaller. For the largest moment, push at right angles to the spanner or the door.

What are clockwise and anticlockwise moments?

Each moment tries to turn the object one way about the pivot. It is either clockwise, the way the hands of a clock move, or anticlockwise. To decide, imagine that this force is the only one acting. Which way would the object start to turn?

On a beam balanced in the middle, a weight hanging on the left gives an anticlockwise moment. A weight hanging on the right gives a clockwise moment.

What is the principle of moments?

When an object is balanced and not turning, we say it is in equilibrium. Then:

total clockwise moment=total anticlockwise moment\text{total clockwise moment} = \text{total anticlockwise moment}

For one force on each side of a pivot, this becomes:

F1d1=F2d2F_1 d_1 = F_2 d_2

All the moments must be taken about the same point. A force that acts through that point has no moment about it.

For equilibrium, the forces must balance too. The total upward force equals the total downward force. So the pivot under a balanced see-saw pushes up with a force equal to the total weight on it. Some courses call these the two conditions of equilibrium.

Worked example 2: a see-saw

Ayesha and Rohan sit on opposite sides of a see-saw. Ayesha weighs 300 N and sits 2.0 m from the pivot. Rohan weighs 400 N. How far from the pivot must Rohan sit for the see-saw to balance? The see-saw is balanced at its centre, so its own weight has no moment about the pivot.

Given: F₁ = 300 N, d₁ = 2.0 m, F₂ = 400 N

Equation: F1d1=F2d2F_1 d_1 = F_2 d_2

Substitution: 300×2.0=400×d2300 \times 2.0 = 400 \times d_2

Answer: d2=600400=1.5 md_2 = \dfrac{600}{400} = 1.5\ \text{m}

The heavier person sits closer to the pivot. That is how an adult can balance a small child, by sitting near the middle.

If a question gives masses instead, such as 30 kg and 40 kg, you can change them to weights with g = 9.8 N/kg. Some courses use g = 10 N/kg. Here g appears on both sides and cancels, so the answer is 1.5 m either way.

Worked example 3: a balanced metre rule

A light metre rule balances on a pivot at its 50 cm mark. A 3.0 N weight hangs at the 10 cm mark. A 2.0 N weight hangs at the 80 cm mark. Where must a 1.5 N weight be hung to balance the rule?

"Light" means the rule's own weight is small enough to ignore.

Distances from the pivot: the 3.0 N weight is 50 − 10 = 40 cm = 0.40 m to the left. The 2.0 N weight is 80 − 50 = 30 cm = 0.30 m to the right.

Anticlockwise moment: 3.0 × 0.40 = 1.2 N m

Clockwise moment so far: 2.0 × 0.30 = 0.60 N m. This is smaller, so the 1.5 N weight must go on the right, at a distance d.

Principle of moments: 1.2 = 0.60 + 1.5d

Answer: d=1.2−0.601.5=0.40 md = \dfrac{1.2 - 0.60}{1.5} = 0.40\ \text{m}. Hang it 40 cm to the right of the pivot, at the 90 cm mark.

The pivot pushes up on the rule with 3.0 + 2.0 + 1.5 = 6.5 N.

Try this in the principle of moments simulation. Drag weights along the metre rule, and check that the clockwise and anticlockwise moments are equal when it balances.

What is the centre of mass?

The centre of mass of an object is the point where its whole weight seems to act. Some courses call it the centre of gravity. For a uniform, symmetrical object, such as a metre rule or a brick, it is at the centre.

An object hung from a point swings, then comes to rest with its centre of mass directly below that point. You can use this to find the centre of mass of a flat card shape. Hang it from two different holes, mark a vertical line below each one using a plumb line, and see where the lines cross.

Worked example 4: a metre rule with its own weight

A uniform metre rule weighs 1.2 N. It balances on a pivot at the 30 cm mark when an unknown weight W hangs at the 0 cm mark. Find W.

Rule's weight: it acts at the centre, the 50 cm mark. That is 0.20 m to the right of the pivot, so it gives a clockwise moment of 1.2 × 0.20 = 0.24 N m.

Unknown weight: it is 0.30 m to the left of the pivot, so it gives an anticlockwise moment of W × 0.30.

Principle of moments: W × 0.30 = 0.24

Answer: W=0.240.30=0.80 NW = \dfrac{0.24}{0.30} = 0.80\ \text{N}

What makes an object stable?

An object topples when the line of action of its weight passes outside its base. Its weight then has a moment about the edge of the base that turns it over. If the line of action stays inside the base, the moment of the weight turns the object back, and it settles.

So an object is more stable when it has:

  • a wide base, and
  • a low centre of mass.

Racing cars are low and wide. Desk lamps and traffic cones have heavy, wide bases. A lorry piled high with goods has a high centre of mass, so it can topple on a sharp bend.

Tilt different shapes and find the angle where each one topples in the centre of mass and stability simulation.

Common mistakes

  • Using the distance along the beam when the force is at an angle. Use the perpendicular distance.
  • Mixing units. Use centimetres on both sides or metres on both sides, never one of each.
  • Forgetting the weight of the beam. For a uniform beam, it acts at the centre.
  • Using masses with other forces. Masses only work if every force is a weight. Otherwise, change masses to weights with W = mg.
  • Writing the unit as J or N/m. The unit of a moment is N m.
  • Taking moments about different points in the same equation.
  • Giving a moment to a force that acts through the pivot. Its moment is zero.

Key points

  • Moment = force × perpendicular distance from the pivot: M=FdM = Fd, measured in N m.
  • A bigger force, or a bigger perpendicular distance, gives a bigger turning effect.
  • Principle of moments: for a balanced object, total clockwise moment = total anticlockwise moment about the same point.
  • For one force on each side of a pivot: F1d1=F2d2F_1 d_1 = F_2 d_2.
  • An object's weight acts at its centre of mass.
  • An object topples when the line of action of its weight passes outside its base. A wide base and a low centre of mass make it more stable.