Speed of Sound and Echoes: How Fast Sound Travels and How to Measure It
Learn why sound needs a medium, how its speed changes from air to water to steel, two ways to measure it, and how echoes let ships, doctors and engineers find distances they cannot see.
Published · 8 min read
On this page
In air, sound travels at roughly 330–340 metres per second. The exact value depends on the temperature. It is about 331 m/s at 0 °C and about 343 m/s at 20 °C. Sound moves faster in liquids, at about 1500 m/s in water, and faster still in solids, at roughly 5000–6000 m/s in steel. It cannot cross a vacuum at all.
To find the speed of sound, measure a distance and the time the sound takes to cover it:
An echo is sound that has bounced back from a surface. The sound goes to the surface and back again, so the distance to the surface is only half of the total distance travelled:
This single idea explains how bats hunt, how ships measure the depth of the sea and how doctors scan an unborn baby.
What kind of wave is sound?
Sound is a longitudinal wave. A vibrating object, such as a guitar string or a loudspeaker cone, pushes on the air next to it. The air particles vibrate back and forth along the direction the wave travels. This makes regions where the particles are squashed together, called compressions, and regions where they are spread out, called rarefactions.
The particles do not travel with the sound. Each one vibrates about its own position and passes the movement on, so what travels is the energy.
Because particles pass the sound along, it needs a medium: a solid, a liquid or a gas. Put an electric bell inside a sealed glass jar and pump the air out. The ringing gets fainter and fainter, yet you can still see the hammer striking the bell. Light crosses the near-empty jar, but sound cannot.
Compare the two kinds of wave in the transverse and longitudinal waves simulation.
How fast does sound travel in different materials?
| Medium | Approximate speed of sound |
|---|---|
| Air at 20 °C | about 340 m/s |
| Water | about 1500 m/s |
| Steel | about 5000–6000 m/s |
These are typical values, not exact ones. In a solid, the particles are packed closely and held by strong forces, so each one hands the vibration on very quickly. In a gas, the particles are far apart and only pass it on when they collide, so the wave is slower.
Temperature matters in air. In warmer air the particles move faster, so they pass the vibration along sooner. On a 35 °C afternoon in Lahore, sound travels at about 350 m/s. That is why some courses give a range rather than one number.
You can hear the difference. Strike one end of a very long steel pipe and a listener at the far end hears two bangs: first through the metal, then through the air. Over 1.0 km, the sound in steel takes about 0.2 s, but the sound in air takes about 2.9 s.
How do you measure the speed of sound with two observers?
You need a large open space, such as a school sports ground.
- Measure a long distance, such as 400 m, with a trundle wheel or a long tape.
- One student bangs two flat wooden boards together above their head, so the bang can be seen as well as heard.
- A second student, at the other end, starts a stopwatch when they see the boards meet and stops it when they hear the bang.
- Repeat several times and work out the mean time.
- Calculate the speed: distance ÷ time.
Light arrives almost instantly, so the measured time is the travel time of the sound. The main problem is reaction time at the start and end of each timing. A long distance helps, because the same error is then a smaller fraction of the time. Wind can speed the sound up in one direction, so swap ends and average.
Worked example 1: two observers in Karachi
Two students stand 400 m apart on a sports ground in Karachi. Their three timings for the sound are 1.21 s, 1.16 s and 1.17 s. Find the speed of sound.
Given: s = 400 m. Mean time = (1.21 + 1.16 + 1.17) ÷ 3 = 1.18 s
Equation:
Substitution:
Answer: v = 339 m/s (3 significant figures)
A more accurate lab method joins two microphones, a measured distance apart, to a fast electronic timer. A sharp clap in line with them starts the timer at the first microphone and stops it at the second, so no human reactions are involved. With the microphones 1.00 m apart, the timer reads only about 2.9 milliseconds.
How does the echo method work?
Stand a measured distance, such as 90 m, from a large flat wall with open ground around it. Clap in a steady rhythm, so that each new clap happens just as the echo of the previous one arrives. A second student times 20 intervals between claps.
In each interval, the sound goes to the wall and back, covering twice the distance to the wall.
Worked example 2: clapping at a wall in Leeds
A student in Leeds stands 90.0 m from a tall wall. Clapping in time with the echoes, they measure 10.6 s for 20 intervals. Find the speed of sound.
Given: distance to the wall = 90.0 m, time for 20 intervals = 10.6 s
Time for one interval: 10.6 ÷ 20 = 0.530 s
Distance travelled in one interval: 2 × 90.0 = 180 m
Equation:
Substitution:
Answer: v = 339.6 m/s, which rounds to 340 m/s
Timing 20 intervals instead of one shrinks the effect of reaction time. An error of 0.2 s in 10.6 s is only about 2%.
A single echo works too. If a hiker shouts towards a cliff and hears the echo 1.6 s later, the cliff is m away, or about 270 m.
How do ships use echoes to measure depth?
Echo sounding, a kind of sonar, uses the same idea under water. A ship sends a short pulse of high-frequency sound down to the seabed, and a detector on the hull times how long the echo takes to return.
Worked example 3: the depth of the sea
A survey ship in the Arabian Sea sends a pulse straight down. The echo from the seabed returns after 0.84 s. Sound travels at 1500 m/s in seawater. Find the depth of the water.
Given: v = 1500 m/s, t = 0.84 s for the journey down and back
Equation: , then halve it
Total distance:
Depth:
Answer: depth = 630 m
Fishing boats use echo sounders to find shoals of fish. Bats and dolphins do the same thing naturally with their own high-pitched clicks.
What is ultrasound, and what is it used for?
Ultrasound is sound with a frequency above 20 000 Hz (20 kHz), the upper limit of human hearing. When ultrasound meets a boundary between two materials, part of it reflects and the rest carries on. Each boundary sends back its own echo, and the time of each echo shows how deep that boundary lies.
- Medical scans. A probe on the skin sends pulses of ultrasound, at a few megahertz, into the body. A computer turns the timings of the echoes from boundaries between soft tissues into a picture. Ultrasound is not ionising, so it is used to check on a baby before birth, where X-rays would carry a risk.
- Finding hidden cracks. A crack inside a steel rail, weld or aircraft part returns an extra echo, sooner than the echo from the far side. Nothing is cut open, so this is called non-destructive testing.
For example, a sonographer in Chennai sees an echo 65 microseconds after a pulse leaves the probe. Taking 1540 m/s as the speed in soft tissue, the boundary is m below the skin, which is 5.0 cm.
You can explore sound waves further in the sound waves and oscilloscope simulation.
Common mistakes
- Forgetting to halve for an echo. The time you measure covers the journey there and back.
- Using the time for many claps as the time for one. Divide by the number of intervals first.
- Putting the speeds in the wrong order. In general, sound is fastest in solids and slowest in gases.
- Saying sound can travel through space. It needs particles to carry the vibration.
- Skipping unit conversions. 65 μs is s, and 20 kHz is 20 000 Hz.
Key points
- Sound is a longitudinal wave with compressions and rarefactions. It needs a medium and cannot travel through a vacuum.
- In air, sound travels at roughly 330–340 m/s, a little faster on hot days. It is about 1500 m/s in water and about 5000–6000 m/s in steel.
- Two observers can measure it with a long distance and a stopwatch, started on seeing the sound made and stopped on hearing it.
- For an echo, the sound travels there and back, so distance = speed × time ÷ 2.
- Ultrasound has a frequency above 20 kHz. Its echoes from boundaries are used in medical scans, crack detection and sonar.