Snell's Law, Refraction and the Critical Angle Explained
Learn why light refracts, how to use refractive index and Snell's law, and how the critical angle leads to total internal reflection in optical fibres.
Published · 7 min read
On this page
Refraction is the change in direction of light when it passes from one material into another at an angle. It happens because light travels at different speeds in different materials.
Here is the short version. Snell's law links the angles on each side of the boundary: . The critical angle is the angle of incidence, inside the denser material, that makes the refracted ray travel along the boundary. For a material surrounded by air, . If the angle of incidence is bigger than the critical angle, all the light reflects back inside. This is total internal reflection, and it is how optical fibres work.
What is refraction?
A straw in a glass of water looks bent at the surface. A swimming pool looks shallower than it really is. Both happen because light changes direction as it crosses from water into air.
To describe refraction, we draw a normal. This is an imaginary line at 90° to the surface, at the point where the ray hits it. All angles are measured from the normal, not from the surface.
- The angle of incidence is between the incoming ray and the normal.
- The angle of refraction is between the refracted ray and the normal.
There are three simple rules:
- When light slows down (for example, from air into glass), it bends towards the normal.
- When light speeds up (for example, from glass into air), it bends away from the normal.
- When light hits the surface along the normal, it does not change direction. It still changes speed.
A material in which light travels more slowly is called optically denser. This is about light speed, not mass.
Why does light bend when it changes speed?
Think of light as a series of wavefronts. A wavefront is a line joining the crests of a wave, like the lines of ripples on a pond.
Imagine a wavefront reaching a glass block at an angle. One end of the wavefront enters the glass first and slows down. The other end is still in air, moving faster. For a short time, one side moves slower than the other, so the whole wavefront swings round. The wave now travels in a new direction.
Picture a row of students marching side by side from a road onto a muddy field at an angle. Those who reach the mud first slow down, so the whole row turns.
The frequency of the light does not change when it enters the glass, because the source sets it. Since , a lower speed means a shorter wavelength.
What is refractive index?
The refractive index, n, tells you how much a material slows light down.
Here c is the speed of light in a vacuum, , and v is the speed of light in the material. Refractive index is a ratio of two speeds, so it has no unit. It is exactly 1 for a vacuum and greater than 1 for every material you meet in school physics.
| Material | Approximate refractive index |
|---|---|
| Vacuum | 1 (exactly) |
| Air | 1.00 |
| Water | 1.33 |
| Glass | About 1.5 (depends on the type) |
| Diamond | 2.42 |
Worked example 1: speed of light in glass
A glass block has a refractive index of 1.50. Find the speed of light in the glass.
Given: n = 1.50,
Equation: , so
Substitution:
Answer:
How do you use Snell's law?
Snell's law connects the refractive indices and the angles on both sides of a boundary.
Medium 1 is the one the light is leaving. Medium 2 is the one it is entering. Both angles are measured from the normal.
When light enters a material from air, , and the law becomes:
where i is the angle of incidence and r is the angle of refraction. Different textbooks use i and r, or and . The physics is the same.
Worked example 2: a ray entering glass
A ray of light in air hits a glass block at an angle of incidence of 40°. The glass has a refractive index of 1.50. Find the angle of refraction.
Given: , ,
Equation:
Substitution: , so
Answer: (2 significant figures)
The ray bends towards the normal, as expected when light slows down.
You can test this yourself. In the refraction and Snell's law simulation, try several angles of incidence. For each one, check that and give the same number.
What is the critical angle?
Now send light from glass into air. The light speeds up, so it bends away from the normal. The angle of refraction is bigger than the angle of incidence.
Slowly increase the angle of incidence. The refracted ray bends further and further from the normal, closer to the surface. At one particular angle of incidence, the refracted ray runs exactly along the boundary. The angle of refraction is then 90°.
That angle of incidence is the critical angle, c. It is always measured inside the denser material, from the normal.
Put into Snell's law. Since , you get . For light going from a material into air ():
Worked example 3: critical angle of glass
Find the critical angle for glass with a refractive index of 1.50.
Given: n = 1.50
Equation:
Substitution:
Answer:
Diamond (n = 2.42) has a critical angle of only about 24°, so light inside a cut diamond reflects many times before escaping. This helps diamonds sparkle.
What is total internal reflection?
Total internal reflection (TIR) happens when both of these are true:
- Light is travelling from a material with a higher refractive index into one with a lower refractive index, such as glass to air or water to air.
- The angle of incidence is greater than the critical angle.
All the light then reflects back into the denser material. It obeys the law of reflection: the angle of reflection equals the angle of incidence.
Below the critical angle, some light still reflects, but the rest refracts out. This is partial reflection.
Worked example 4: does the light escape?
Light inside water (n = 1.33) hits the water surface at an angle of incidence of 55°. Does it pass into the air?
Step 1, find the critical angle: , so
Step 2, compare: 55° is greater than 48.8°.
Answer: total internal reflection happens. No light refracts into the air.
Snell's law agrees: it gives . The sine of an angle can never be more than 1, so there is no refracted ray. If your calculator shows an error here, that is the physics telling you TIR has happened.
How do optical fibres use total internal reflection?
An optical fibre is a thin strand of very pure glass or plastic. It has a central core surrounded by a layer called the cladding. The cladding has a lower refractive index than the core.
Light enters one end of the fibre. Each time it hits the boundary between core and cladding, the angle of incidence is bigger than the critical angle. So the light is totally internally reflected, again and again, all the way along. It can even follow gentle bends.
If the fibre is bent too sharply, the angle of incidence drops below the critical angle and some light leaks out. The cladding also protects the core surface from scratches and stops light passing between fibres in a bundle.
Optical fibres carry internet and phone data as pulses of light, including through undersea cables that link continents. Doctors use bundles of fibres in endoscopes to see inside the body without large cuts. You can follow a ray as it bounces along a curved fibre in the optical fibre simulation.
Common mistakes
- Measuring angles from the surface. Always measure from the normal.
- Calculator in radians. Check that it is set to degrees before using sin or inverse sin.
- TIR in the wrong direction. It only happens when light goes from a higher refractive index to a lower one. Light going from air into glass can never be totally internally reflected.
- Forgetting where the critical angle is. It is the angle of incidence inside the denser material.
- Writing sin c = n. If you get a sine bigger than 1, you have the fraction upside down.
Key points
- Refraction is a change in direction caused by a change in speed.
- Light bends towards the normal when it slows down and away from the normal when it speeds up.
- Refractive index: . It has no unit.
- Snell's law: , with angles measured from the normal.
- Critical angle: for a material in air, measured in the denser material.
- TIR needs light going from higher n to lower n, at an angle of incidence greater than the critical angle.
- Optical fibres use TIR to carry light along a core surrounded by cladding of lower refractive index.