The Particle Model of Matter: Solids, Liquids, Gases and Changes of State
Use the particle model to explain the three states of matter, why mass is conserved when a substance changes state, why gases are so much less dense, what internal energy means and where gas pressure comes from.
Published · 8 min read
On this page
The particle model says that all matter is made of tiny particles (atoms or molecules) that are always moving. The three states of matter differ in how the particles are arranged, how they move and how strongly they attract each other:
- Solid: particles packed tightly in a regular pattern. They vibrate about fixed positions, held by strong forces.
- Liquid: particles still close together, but in no fixed pattern. They move around and slide past each other. The forces are still significant.
- Gas: particles far apart, moving fast and randomly in all directions. The forces between them are very weak.
This one model explains a lot. It explains why ice keeps its shape and water does not, why steam takes up so much more room than the water it came from, why a balloon swells in the sun and why the temperature of melting ice stays at 0 °C.
How do solids, liquids and gases compare?
| Property | Solid | Liquid | Gas |
|---|---|---|---|
| Arrangement | Regular, tightly packed | Random, close together | Random, far apart |
| Movement | Vibrate about fixed positions | Move around and slide past each other | Move quickly in all directions |
| Forces between particles | Strong | Weaker, but still important | Very weak |
| Shape and volume | Fixed shape and fixed volume | Takes the shape of its container; fixed volume | Fills the whole container |
| Can it be squashed? | Almost not at all | Almost not at all | Easily |
In a particle diagram, draw solid particles touching in neat rows. Draw liquid particles mostly touching, but jumbled. Draw gas particles widely spaced, with only a few in the box.
How does particle spacing explain density?
Density is mass per unit volume. In solids and liquids, the particles are packed closely, so the densities are high and quite similar. In a gas, the same particles are spread through a far larger space, so the density is much lower. Water has a density of about 1000 kg/m³. Air at room temperature has a density of only about 1.2 kg/m³.
Worked example 1: from water to steam
A cook in Karachi boils away 18 g of water. Liquid water has a density of 1000 kg/m³. Steam at 100 °C and normal atmospheric pressure has a density of about 0.60 kg/m³. Find the volume of the liquid and the volume of the steam.
Given: m = 18 g = 0.018 kg. The mass stays the same when the water changes state.
Equation:
Liquid: , which is 18 cm³
Steam: , which is 30 litres
Answer: as steam, the same 18 g takes up about 1700 times as much space.
The particles have not grown. They are just much further apart. If the volume grows about 1700 times, the distance between neighbouring particles grows about 12 times, because .
Worked example 2: why frozen pipes burst
In a Canadian winter, 1.00 kg of water freezes inside a pipe. Ice has a density of about 920 kg/m³. Find the volume of the ice and compare it with the volume of the water.
Given: m = 1.00 kg, = 1000 kg/m³, ≈ 920 kg/m³
Equation:
Water: , or 1000 cm³
Ice: , or about 1090 cm³
Answer: the ice takes up about 9% more space, but its mass is still 1.00 kg. The expanding ice can split the pipe.
Water is unusual here. In most substances the solid is denser than the liquid. In ice, the water molecules lock into an open pattern with more space between them than in the liquid. That is also why ice floats.
What happens to the particles when a substance changes state?
- Melting: solid to liquid. Freezing: liquid to solid.
- Boiling or evaporating: liquid to gas. Condensing: gas to liquid.
- Sublimating: solid straight to gas, as dry ice (solid carbon dioxide) does.
These are physical changes. No new substance forms, and if you reverse the change, you get back the material you started with. The number of particles stays the same, so mass is conserved. If water seems to "disappear" from an open dish, its particles have escaped into the air as vapour. In a sealed container, the total mass would not change.
Evaporation happens only at the surface of a liquid, at any temperature. The fastest particles escape, leaving slower ones behind, so the liquid cools. Boiling happens throughout the liquid, at a fixed temperature for a given air pressure, with bubbles of vapour forming inside it.
What is internal energy?
The particles in a substance have two kinds of energy. They have kinetic energy because they move or vibrate. They have potential energy because of the forces between them, which depends on how far apart they are. The internal energy is the total of both, added up over every particle.
Heating a substance increases its internal energy in one of two ways:
- It makes the particles move faster on average. The temperature rises.
- It works against the forces between the particles, breaking up their arrangement or pulling them apart. The substance changes state, and the temperature does not rise while this happens.
So when ice is melting, a thermometer in it stays at 0 °C even though energy keeps flowing in. The energy is breaking the regular arrangement, not speeding the particles up. The energy needed per kilogram for a change of state is called the specific latent heat.
How do moving particles cause gas pressure?
Gas particles move fast in random directions. They keep hitting the walls of their container and bouncing off. Each collision gives the wall a tiny push. An enormous number of collisions every second add up to a steady force on the wall. Pressure is that force divided by the area of the wall.
Worked example 3: two ways to raise the pressure
(a) A rickshaw driver in Lahore checks the tyres in the cool morning. By the hot afternoon, the pressure is higher. Explain why. (b) A student seals the end of a syringe and pushes the plunger in slowly, so the temperature stays the same. Explain why the pressure rises.
(a) The volume of the tyre stays about the same. The air inside gets warmer, so its particles move faster on average. They hit the walls more often, and harder. The force on each square metre increases, so the pressure rises.
(b) The particles move at the same average speed, because the temperature has not changed. But they now have less space, so each part of the wall is hit more often. More collisions each second mean a bigger force on each square metre, and a higher pressure.
If you cool a gas, its particles slow down. At absolute zero, −273 °C or 0 K, they would have the least possible kinetic energy. Nothing can be colder.
You can find evidence that the particles really are moving. Under a microscope, specks of smoke in air jiggle about at random. This is Brownian motion. The specks are being hit, unevenly, by fast-moving air molecules that are far too small to see.
Explore the states of matter in the particle model and states of matter simulation, and gases in the gas laws and particles simulation.
What are the limits of the particle model?
The model is very useful, but it is a simplification. Real atoms are not hard little balls. Diagrams are flat, while real particles move in three dimensions. Gas diagrams cannot show the true spacing, or the box would be almost empty. Diagrams usually leave out the forces between particles altogether. Use the model to explain and predict, but remember that it is a model.
Common mistakes
- Saying the particles in a solid do not move. They vibrate about fixed positions.
- Saying particles expand when heated. The particles stay the same size; the gaps between them change.
- Saying mass is lost when water evaporates. The particles move into the air, and mass is conserved.
- Saying the temperature rises during melting. Energy goes in, but the temperature stays the same until all of the solid has melted.
- Drawing liquid particles widely spaced. In a liquid they are almost as close as in a solid.
- Explaining gas pressure without collisions. Always mention particles hitting the walls, and how often and how hard they hit.
Key points
- Solids: regular, close, vibrating particles with strong forces. Liquids: close, random, moving particles. Gases: far apart, fast, random particles with very weak forces.
- Gases have much lower densities because their particles are much further apart.
- Changes of state are physical changes. Mass is conserved.
- Internal energy is the sum of the kinetic and potential energies of every particle.
- Heating raises the temperature or changes the state, but not both at once.
- Gas pressure comes from particles colliding with the walls. Heating a gas, or squeezing it into less space, raises the pressure.