Nuclear Fission and Fusion: Splitting and Joining Nuclei, Explained
Learn how a neutron makes uranium-235 split, how a chain reaction grows and how a reactor keeps it steady, why fusion powers the stars but is so hard to copy on Earth, and how to balance fission and fusion equations.
Published · 8 min read
On this page
In nuclear fission, a heavy nucleus such as uranium-235 breaks into two smaller nuclei. In nuclear fusion, two light nuclei, such as isotopes of hydrogen, join to make a heavier nucleus. Both release enormous amounts of energy from very little fuel.
Fission runs every nuclear power station working today. Fusion powers the Sun and the other stars, but no fusion power station supplies electricity yet. In both processes, the products have slightly less mass than the particles that went in. That tiny loss of mass is released as energy, carried away by the moving particles and by radiation.
How does nuclear fission work?
A large nucleus hardly ever splits by itself. Fission is normally triggered like this:
- A uranium-235 nucleus absorbs a neutron. (Plutonium-239 behaves in a similar way.)
- The nucleus becomes very unstable and splits in two. Both pieces are medium-sized nuclei, such as barium and krypton. These are called fission products.
- Two or three neutrons fly out, along with gamma rays.
- The two new nuclei and the neutrons fly apart very fast, so they carry a lot of kinetic energy. In a reactor, they collide with nearby atoms, heating the reactor core.
The energy is huge. For interest, one fission releases tens of millions of times more energy than burning one molecule of methane, the main gas in natural gas. Splitting every nucleus in 1 kg of uranium-235 would release roughly as much energy as burning 3 million kilograms of coal (an approximate figure).
How do you balance a fission equation?
In a nuclear equation, the top numbers (mass numbers) must add up to the same total on each side. So must the bottom numbers (atomic numbers). A neutron is written : a mass number of 1 and no charge.
Check the top: , and . Check the bottom: , and . It balances. Uranium-235 can split in many different ways, so you will meet other pairs of products too.
Worked example 1: find the missing nucleus
Complete this equation: uranium-235 absorbs a neutron and splits into barium-144, an unknown nucleus X and three neutrons.
Mass numbers: , so
Atomic numbers: , so
Answer: element 36 is krypton, so X is krypton-89, written .
Worked example 2: how many neutrons are released?
In another fission, uranium-235 absorbs a neutron and splits into xenon-140 (), strontium-94 () and some neutrons. How many neutrons?
Mass numbers: , so
Check the atomic numbers: , which matches uranium.
Answer: two neutrons are released.
What is a chain reaction?
The neutrons from one fission can be absorbed by other uranium-235 nuclei, making them split too. Each of those releases more neutrons, and so on. This is a chain reaction.
Suppose each fission led to exactly two more. After 10 steps, a single generation would contain fissions. After 80 steps, it would be about . Left uncontrolled, the energy is released almost instantly. That is what happens in a nuclear weapon.
In a power station, the chain reaction is controlled. On average, exactly one neutron from each fission goes on to cause another, so energy is released at a steady rate.
How does a reactor control the chain reaction?
- Fuel rods hold the uranium.
- A moderator, such as water or graphite, slows the fast neutrons down. Slow neutrons are much more likely to be absorbed by uranium-235 and cause fission.
- Control rods, made of materials such as boron, absorb neutrons. Lowering them further into the core absorbs more neutrons, so the reaction slows. Raising them speeds it up. In an emergency, they drop fully in and stop the chain reaction.
- A coolant carries the thermal energy away to make steam, which drives turbines and generators, as in any thermal power station.
- Thick concrete shielding absorbs the radiation.
Reactors at Chashma in Pakistan and Kudankulam in India use water as both moderator and coolant. The reactors at Heysham in England use graphite as the moderator. The used fuel contains radioactive fission products, some with very long half-lives, so it has to be kept safe, often for thousands of years.
How does nuclear fusion work?
In fusion, two light nuclei join to make one heavier nucleus. In the Sun, hydrogen nuclei fuse in several steps to make helium. The reaction chosen for future fusion power stations joins two heavier isotopes of hydrogen, deuterium and tritium:
Worked example 3: checking a fusion equation
Show that a neutron is the missing particle in the equation above.
Mass numbers: on the left. Helium has 4, so the missing particle has .
Atomic numbers: on the left. Helium has 2, so the missing particle has .
Answer: a mass number of 1 and no charge: a neutron.
Kilogram for kilogram, this reaction releases roughly four times as much energy as fission (approximate).
Why does fusion need such extreme conditions?
Every nucleus carries a positive charge, and like charges repel. To fuse, two nuclei must get extremely close, which means they must be moving very fast when they collide. Fast-moving particles mean a very high temperature. The fuel must also be at high pressure and density, so that collisions happen often enough.
In the Sun's core, the temperature is about 15 million °C, and the Sun's own gravity supplies a colossal pressure. Reactors on Earth cannot match that pressure, so they need even hotter fuel, well over 100 million °C.
Why are fusion power stations so hard to build?
- Nothing can hold the fuel. At over 100 million °C, any container wall would be damaged at once, and the fuel would cool. Instead, strong magnetic fields hold the hot fuel away from the walls, or powerful lasers squeeze tiny pellets of fuel.
- More energy must come out than goes in. In 2022, a laser laboratory in California released more fusion energy from a pellet than its lasers delivered to it. Even so, running the lasers took far more electricity than that.
- The neutrons damage the reactor over time, and tritium is rare and must be made.
ITER, a huge experimental reactor being built in France by partners including China, the European Union, India, Japan, Korea, Russia and the USA, aims to show that fusion can work on a large scale. The prize is a plentiful fuel, no carbon dioxide and far less long-lived waste than fission.
| Fission | Fusion | |
|---|---|---|
| What happens | A heavy nucleus splits into two smaller ones | Two light nuclei join into a heavier one |
| Typical fuel | Uranium-235 or plutonium-239 | Isotopes of hydrogen |
| What starts it | The nucleus absorbs a neutron | Very high temperature and pressure |
| Where it happens | Nuclear power stations | Stars, and experimental reactors |
| Waste | Radioactive fission products, some lasting thousands of years | Mainly helium, which is not radioactive, though the reactor walls slowly become radioactive |
| Electricity today? | Yes | Not yet |
Our fission and fusion simulation lets you explore both ways of releasing energy from nuclei.
Common mistakes
- Mixing up the names. Fission splits a nucleus, like a crack or fissure. Fusion joins nuclei, like fusing two things together.
- Saying the neutron smashes the nucleus apart. The nucleus absorbs the neutron, becomes unstable and then splits.
- Saying control rods slow the neutrons down. The moderator slows them. Control rods absorb them.
- Forgetting the neutrons when balancing. Count every neutron on the right, including the number in front.
- Confusing fission with radioactive decay. Decay gives out a small alpha or beta particle, or gamma rays. Fission splits the nucleus into two large pieces.
- Saying fusion power stations already make electricity. They are still experimental.
Key points
- Fission: after absorbing a neutron, a heavy nucleus breaks into two smaller nuclei, giving out two or three neutrons, gamma rays and energy.
- The released neutrons can cause a chain reaction. In a reactor, a moderator slows the neutrons, and control rods absorb them to keep the reaction steady.
- Fusion: two light nuclei join to make a heavier nucleus. It powers the stars.
- Fusion needs a very high temperature and pressure, because the positive nuclei repel each other.
- In both, the products have slightly less mass, and the difference is released as energy.
- In a nuclear equation, the mass numbers and the atomic numbers must each balance.