Skip to content

How a DC Motor Works: The Motor Effect, Fleming's Left-Hand Rule and F = BIl

Learn why a current-carrying wire feels a force in a magnetic field, how to find its direction with Fleming's left-hand rule, how to calculate it with F = BIl, why a coil turns, what the split-ring commutator does, and how to make a motor faster.

Published · 9 min read

On this page

A d.c. motor uses the motor effect: a wire carrying a current in a magnetic field feels a force. In a motor, a coil of wire sits between the poles of a magnet. Current flows one way along one side of the coil and back the other way along the opposite side. So one side is pushed up and the other is pushed down, and the coil turns.

A split-ring commutator keeps it turning. Every half turn, it reverses the current in the coil. That flips both forces at just the right moment, so the coil keeps spinning the same way instead of rocking to a stop.

What is the motor effect?

A current in a wire makes its own magnetic field, in circles around the wire. Place the wire between the poles of a magnet, and the two fields combine. On one side of the wire, they point the same way and add up to a stronger field. On the other side, they point opposite ways and partly cancel. The wire is pushed out of the strong field, towards the weak side. The magnet feels an equal push in the opposite direction.

  • The force is biggest when the wire runs at right angles to the field lines.
  • There is no force when the wire runs parallel to the field lines.
  • Reverse the current, or reverse the field, and the force reverses. Reverse both, and nothing changes.

How do you use Fleming's left-hand rule?

Hold your left hand with the thumb, first finger and second finger all at right angles to each other.

  • First finger: the Field, pointing from N to S.
  • Second finger: the current, from + to −. This is conventional current, not the electron flow.
  • Thumb: the motion, which is the direction of the force.

Worked explanation 1: which way is the wire pushed?

A wire lies between two magnets, with the N pole on the left and the S pole on the right. The current in the wire flows into the page. Which way is the force?

Field: point your first finger from left to right, from N to S.

Current: point your second finger into the page.

Force: your thumb now points down the page.

Answer: the wire is pushed downwards. With the current flowing out of the page, it would be pushed upwards.

How do you calculate the force with F = BIl?

For a straight wire at right angles to a uniform magnetic field, the size of the force is:

F=BIlF = BIl
  • F is the force, in newtons (N)
  • B is the magnetic flux density, in tesla (T), which says how strong the field is
  • I is the current, in amperes (A)
  • l is how much of the wire lies in the field, in metres (m)

For scale, the Earth's field is only about 0.00005 T, while a hospital MRI scanner uses 1.5 T or more.

Worked example 2: the force on a wire

In a lab in Kuala Lumpur, a student clamps a wire between the poles of a magnet. A 5.0 cm length of the wire lies in a 0.20 T field, at right angles to it, and carries a current of 3.0 A. Find the force on the wire.

Given: B = 0.20 T, I = 3.0 A, l = 5.0 cm = 0.050 m

Equation: F=BIlF = BIl

Substitution: F=0.20×3.0×0.050F = 0.20 \times 3.0 \times 0.050

Answer: F = 0.030 N, about the weight of a 3 g mass

Worked example 3: finding the current

A 25 cm length of wire, at right angles to a 0.080 T field, feels a force of 0.12 N. What current flows through the wire?

Given: F = 0.12 N, B = 0.080 T, l = 25 cm = 0.25 m

Equation: I=FBlI = \dfrac{F}{Bl}

Substitution: I=0.120.080×0.25=0.120.020I = \dfrac{0.12}{0.080 \times 0.25} = \dfrac{0.12}{0.020}

Answer: I = 6.0 A

How does the coil in a motor turn?

In a simple motor, a rectangular coil sits on an axle between the poles of a magnet, with its two long sides across the field. The current goes along one side and comes back along the other, so the forces on the two sides are opposite. One side is pushed up and the other down, which turns the coil about its axle.

Worked explanation 4: which way does the coil spin?

Look along the axle. The N pole is on the left and the S pole on the right, and the coil lies flat. Its left side carries current into the page, and its right side carries current out of the page.

Left side: this matches worked explanation 1, so it is pushed down.

Right side: the current is reversed, so the force is reversed. It is pushed up.

Answer: with the left side moving down and the right side moving up, the coil turns anticlockwise as you look at it.

The turning effect is greatest when the coil lies flat, parallel to the field, because the forces then push at right angles to the coil. When the coil stands upright, any forces on its sides act along the plane of the coil, in line with the axle, so they give no turning effect. In a real split-ring motor, the brushes also cross the gaps in the ring at about that moment, so the current, and with it the force, drops to zero for an instant. The coil's momentum carries it past the upright position, and then the current is reversed.

What does the split-ring commutator do?

Without help, the coil would get stuck. After half a turn, the side that started on the left is on the right. If its current still flowed the same way, the force on it would push the coil backwards, so the coil would rock to and fro and stop.

The split-ring commutator is a ring cut into two halves. Each half is joined to one end of the coil and spins with it. Two fixed brushes, often made of carbon, press against the ring and connect it to the supply. Every half turn, just as the coil passes upright, the halves swap brushes and the current in the coil reverses. So the side on the left always carries current into the page and is always pushed down. The coil keeps turning one way.

An a.c. generator uses slip rings instead: two complete rings that keep each end of the coil on the same brush, so they never reverse anything.

How can you make a motor faster or stronger?

Bigger forces give a bigger turning effect, so the motor can drive a heavier load. You can:

  • increase the current, for example with a higher p.d. from the supply
  • use a stronger magnet
  • put more turns of wire on the coil
  • wind the coil on a soft iron core, which concentrates the magnetic field

In an exam, the answer to "how can the motor be made to turn faster?" is any of the changes above: they all give a bigger turning effect, and both Cambridge and AQA expect that answer. A higher p.d. from the supply is the surest way in practice. (In a real motor, a stronger magnet or more turns can actually lower its top speed, for reasons beyond GCSE.)

To make the motor spin the other way, reverse the current or turn the magnet round, but not both.

Real motors use several coils at different angles and a commutator cut into many segments, so the turning effect never drops to zero. Motors like this drive toy cars, many cordless drills and car windscreen wipers.

Explore the force on a current-carrying wire in the motor effect simulation. In the Wire in a field set-up, press Reverse I or Flip magnet, and the rod is pushed the other way. Then choose d.c. motor and press play. The graph shows the turning effect at its biggest with the coil horizontal and zero when it is vertical. Change Coil connected through to Slip rings, and the coil swings to and fro and comes to rest upright. To revise the field that the coil sits in, see the bar magnet field simulation.

Common mistakes

  • Using the right hand. Fleming's rule for motors uses the left hand. The right-hand grip rule is for the field around a wire.
  • Pointing the field from S to N. Field lines run from N to S.
  • Leaving l in centimetres. Convert 5.0 cm to 0.050 m before you use F=BIlF = BIl.
  • Putting the biggest turning effect in the wrong place. It is biggest when the coil lies flat, parallel to the field, and zero when the coil stands upright.
  • Mixing up split rings and slip rings. A d.c. motor needs the split ring, which reverses the current every half turn.

Key points

  • A current-carrying wire across a magnetic field feels a force. This is the motor effect.
  • Fleming's left-hand rule: first finger for the field, second finger for the current, thumb for the motion.
  • For a wire at right angles to the field, F=BIlF = BIl, with B in tesla and l in metres.
  • Opposite currents in the two sides of a coil give opposite forces, which turn it. The split-ring commutator reverses the current every half turn, so it keeps turning one way.
  • More current, a stronger magnet, more turns and an iron core all give a bigger turning effect.