Energy Stores and Transfers Explained: Conservation, Dissipation and Sankey Diagrams
Describe any energy change with stores and pathways, see how this links to the forms-of-energy wording some courses use, and use conservation of energy, Sankey diagrams and efficiency in worked examples.
Published · 7 min read
On this page
Energy is never made and never destroyed. It is only moved around. Physicists describe this with stores and transfers. Energy sits in stores, such as the kinetic store of a moving bus or the chemical store of a battery. It moves from one store to another by four pathways: mechanically (a force doing work), electrically (a current doing work), by heating, and by radiation (waves such as light and sound).
The total amount of energy always stays the same. This is the principle of conservation of energy. But in every real process, some energy spreads out into the surroundings and warms them a little. This is called dissipation. The energy is still there, but it is much harder to use.
A Sankey diagram shows where the energy goes, and efficiency tells you what fraction of it does the job you wanted. This guide covers all of these ideas, with worked examples.
What are the energy stores?
| Store | Energy is stored because | Example |
|---|---|---|
| Kinetic | an object is moving | a cyclist riding through Amsterdam |
| Gravitational potential | an object is raised in a gravitational field | water held behind the Kariba Dam in Zambia and Zimbabwe |
| Elastic potential (strain) | an object is stretched, squashed or bent | a drawn bow or a stretched trampoline |
| Chemical | of the bonds in fuels, food and batteries | petrol, a plate of rice, a phone battery |
| Thermal (internal) | the particles of an object are moving and vibrating | a hot cup of tea |
| Nuclear | of the forces inside atomic nuclei | uranium fuel, or hydrogen in the Sun |
| Electrostatic | charges attract or repel each other | a thundercloud before a lightning flash |
| Magnetic | magnets or magnetic materials attract or repel | two fridge magnets held apart |
Not every course lists the magnetic store, so check your own syllabus.
How does energy move between stores?
Energy moves between stores along four pathways:
- Mechanically. A force moves an object, so work is done. A cricket bat pushes on a ball and fills its kinetic store.
- Electrically. A current flows, so electrical work is done. A charger refills the chemical store of a phone battery.
- By heating. Energy flows from a hotter object to a cooler one. A gas flame warms a pan of water.
- By radiation. Waves carry energy away. The Sun warms the Earth with light and infrared, and a loudspeaker sends out sound.
Light, sound and electricity are not stores. They are ways of carrying energy from one store to another.
How do you describe an energy change?
Pick the object or group of objects you are interested in. This is your system. Then say which stores go down, which go up, and which pathway links them.
- A car braking to a stop. The kinetic store of the car decreases. Energy is transferred mechanically by friction in the brakes, so the thermal store of the brake discs increases. They then cool, heating the air.
- A ball thrown straight up. As it rises, its kinetic store decreases and its gravitational potential store increases. At the top it is still for an instant, so its kinetic store is empty.
- A solar lamp in rural Bangladesh. By day, light from the Sun falls on a solar cell. Energy is transferred electrically to the chemical store of a battery. At night, the battery drives a current through an LED, which carries energy away by light. Finally, the room is warmed very slightly.
You can explore changes like these in the energy stores and transfers simulation.
What does conservation of energy mean?
In a closed system, where no energy enters or leaves, the total energy stays the same. Stores can rise and fall, but the total does not change. For any device:
This lets you find a missing amount without measuring it.
Worked example 1: an archer's bow
Archery is the national sport of Bhutan. An archer draws a bow, storing 70 J in its elastic potential store. When released, the 0.020 kg arrow leaves at 70 m/s. Find the energy in the arrow's kinetic store, the energy that did not reach the arrow, and the efficiency of the bow.
Given: energy in = 70 J, m = 0.020 kg, v = 70 m/s
Equation:
Substitution:
Answer: Ek = 49 J
Energy that did not reach the arrow: 70 − 49 = 21 J. It went into the kinetic store of the vibrating limbs and string, then away by sound and by heating the bow and the air.
Efficiency: , or 70%
What is dissipation?
Every real process wastes some energy. Friction warms moving parts. Electric currents warm the wires they flow through. Vibrating machines send out sound, which soon fades into slightly warmer air. In each case the energy spreads out into the thermal store of the surroundings. It is not destroyed, but it is now spread so thinly that it is very hard to use again.
You can cut unwanted transfers:
- Lubrication reduces friction, so moving parts heat up less.
- Thermal insulation, such as loft insulation, cavity wall foam and double glazing, slows the energy flow out of a warm house.
- Streamlining reduces drag on cars, trains and planes.
How do you read a Sankey diagram?
A Sankey diagram is a flow diagram drawn to scale. A wide arrow comes in from the left. Its width shows the total energy input. It splits into narrower arrows:
- The useful output usually carries straight on.
- The wasted outputs usually bend away, often downwards.
The widths of the outgoing arrows add up to the width of the incoming arrow, because energy is conserved. If you count squares on a grid, each square stands for a fixed amount, such as 10 J.
Worked example 2: a desk fan
A Sankey diagram for a desk fan in Lahore shows 900 J transferred electrically to the fan. One arrow shows 540 J going to the kinetic store of the moving air. Another shows 315 J heating the motor and its surroundings. A third arrow, for sound, has no label. Find the missing value and the efficiency.
Conservation of energy: sound = 900 − 540 − 315
Answer: 45 J is carried away by sound
Efficiency:
Answer: 0.60, or 60%
In the end, even the moving air and the sound warm the room slightly. Almost every energy transfer finishes in the thermal store of the surroundings.
To practise more efficiency questions, try the power and efficiency simulation.
Common mistakes
- Calling light, sound or electricity a store. They are pathways that carry energy between stores.
- Saying energy is "used up" or "lost". It is transferred, and the wasted part is dissipated to the surroundings.
- Drawing a Sankey diagram whose outputs do not add up to the input.
- Forgetting what "useful" means. For a lamp the light is useful. For a heater, the heating is useful.
- Getting an efficiency above 1, or above 100%. Check that you divided output by input.
- Mixing the two wordings. If your course uses stores, avoid "heat energy". If it uses forms, follow its terms instead.
Key points
- Energy is held in stores: kinetic, gravitational potential, elastic, chemical, thermal, nuclear, electrostatic and magnetic.
- It moves between stores mechanically, electrically, by heating and by radiation.
- Energy cannot be created or destroyed. In a closed system, the total stays the same.
- Wasted energy is dissipated, mostly into the thermal store of the surroundings.
- In a Sankey diagram, arrow widths show amounts of energy, and the outputs add up to the input.
- Efficiency = useful output ÷ total input. It can never be more than 1, or 100%.